12-13
| Press [START • SPLIT] conse- |
|
|
| ||
|
|
|
| |||
| C O nT |
|
| |||
| (darkness of the digits - default is 9), then back to | cutively to advance the contrast | 1 6 |
|
| |
| Second, and recycles again. |
| up to 16, then cycle back to 1. |
|
|
|
|
|
|
|
| ||
| Note: when the second is to be set, press [START | The contrast setting will be |
|
|
| |
| shown on the display. |
|
|
| ||
| • SPLIT] to reset the second digits to zero. At the |
|
|
| ||
|
|
|
|
| ||
| end of setting, press [RECALL] (S4) or [MODE] to | NOTE: |
|
|
| |
| exit from the setting mode and back toTime of | • The hour digits may be displayed in 12 hr or |
| |||
| Day Display. |
|
| |||
|
| 24 hr format. |
|
|
| |
| Display for Sound ON or | S O U n d |
|
|
| |
| • The year digits can be set from 2000 to 2099. |
| ||||
| O n |
| ||||
| OFF setting : |
| ||||
|
| The date adjusts automatically for odd and even |
| |||
| (Let the current status be “ON”.) |
|
| |||
|
| months including February of leap years.The |
| |||
|
| S O U n d |
| |||
| Press [START • SPLIT] to toggle | day of week also adjusts automatically after you |
| |||
| O n |
| ||||
| Sound ON or OFF. | set the date. |
|
|
| |
|
|
|
|
| ||
|
|
|
|
| ||
| Display for contrast adjustment: |
|
|
|
|
|
| C O nT |
|
|
|
| |
| (Let the current contrast be “5”) |
|
|
|
| |
| 5 |
|
|
|
| |
| 12 |
|
| 13 |
| |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14-15
Alarm Time Mode
Press [MODE] until you enter Alarm mode.This mode is used for displaying the daily alarm time and allows you to enable or disable the alarm.
When you enter the AlarmTime mode, the display shows the alarm time on the upper line while the date is shown in the middle of the display and the normal time is on the lower line.
Alarm | ° AlarmTime |
| |
Indicator | ° day, month - date |
| ° hr : min second |
To toggle the alarm ON or OFF, press [STOP • RESET]. When alarm is ON, the indicator “
” will be ON while it will be turned off when alarm is disabled. When alarm time is reached, the alarm signal will sound for 60 seconds. Press any button to stop the alarm sound.
Setting Alarm Time
Press and hold [RECALL] (S1) for 2 seconds to ac- tivate the alarm setting.The alarm “minute” digits will flash as an indication. Adjust the flashing digit by pressing [START • SPLIT] (S3).To set the alarm hour digits, press [STOP • RESET] (S2) to switch to hour digits and then press [START • SPLIT] (S3) to adjust. Press [RECALL] (S4) or [MODE] to exit from Alarm setting mode.
14 | 15 |