JVC RX-430VBK Basic Settings, Adjusting the Front Speaker Output Balance, Using the Sleep Timer

Page 18

English

Basic Settings

Some of the following settings are required after connecting and positioning your speakers in your listening room, while others will make operations easier.

Adjusting the Front Speaker Output Balance

SETTING

If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.

On the front panel only:

1. Press SETTING so that the Control %/ Þ/ @/ # buttons work for adjusting the balance.

The lamp above the button lights up.

2. Press Control % / Þuntil “BALANCE” appears on the display.

3. Press Control @ / #to adjust the balance.

• Pressing Control @ decreases the right channel output.

• Pressing Control # decreases the left channel output.

Listening at Low Volume (Loudness)

Human ears are not sensitive to bass at low volume. To compensate for this, the loudness function automatically boosts the bass level as you lower the volume.

SETTING

On the front panel only:

 

1.Press SETTING so that the Control %/ Þ/ @/ # buttons work for setting the loudness. The lamp above the button lights up.

2.Press Control % / Þuntil “LOUDNESS” appears on the display.

3. Press Control @/ # to set the loudness function to “ON” or “OFF.”

• Select “ON” to activate the loudness function.

The LOUDNESS indicator lights up on the display.

•Select “OFF” to cancel it. The indicator goes off.

Using the Sleep Timer

SETTING

Using the Sleep Timer, you can fall asleep to music and know the receiver will turn off by itself rather than play all night.

On the front panel only:

1.Press SETTING so that the Control %/ Þ/ @/ # buttons work for setting the Sleep Timer. The lamp above the button lights up.

2.Press Control % / Þuntil “<SLEEP>” appears on the display.

3.Press Control @/ #to set the shut-off time.

Each time you press the button, the shut-off time on the display changes as follows, and the SLEEP indicator lights up on the display.

1020304050 60 70 80

0

(Canceled)

Page 13

Page 17 Page 19
Image 18
Page 17 Page 19
Contents RX-430VBK Per I’ltalia English Deutsch Français Nederlands Español Italiano Voorzichtig -- Power en STANDBY/ON RX-430VBK Table of Contents Switches, Buttons and Controls Remote ControlFront Panel Before Installation Checking the Supplied AccessoriesGetting Started FM Antenna Connections Connecting the FM and AM MW/LW AntennasUsing the Supplied FM Antenna AM MW/LW Antenna ConnectionsConnecting the Speakers Connecting the front speakersConnecting the rear and center speakers Case 3 When you connect front and rear speakers Case 1 When you connect only front speakersCase 2 When you connect front speakers and a center speaker About the speaker impedance of the speakersAudio component connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Audio Components Video ComponentsVideo component connections VCRPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Press Power to set it in the on positionTurning the Power On and Off Standby Basic OperationsSelecting the Source to Play Selecting the Front Speakers Adjusting the VolumeFrom the remote control only Muting the SoundListening with Headphones Recording a SourceListening at Low Volume Loudness Basic SettingsAdjusting the Front Speaker Output Balance Using the Sleep TimerLarge Selecting the Center Speaker SizeLarge Small no SmallTo cancel the One Touch Operation function Using the One Touch OperationTo store the sound settings Press ONE Touch Operation One Touch OperationStoring the preset stations Tuning in Stations ManuallyUsing Preset Tuning Receiving Radio BroadcastsFM Auto Selecting the FM Reception ModeTuning in a Preset Station FM MonoMovie Sports Music Using the Preset SEA ModesSelecting Your Favorite SEA Mode SPORTS1 SPORTS2 SPORTS3Press Preset to select the effect level Movie SPORTS2 JazzMovie 1 Movie 2 Movie What is surround? Using the Surround ProcessorUsing JVC’s Hall Surround Prologic 3CHLOGIC HallPress Rear +/- to adjust the rear speaker output level Delay 1 Delay 2 DelayDelay Press Delay to adjust the delay timeSpeaker Arrangements for Dolby Surround This casePreparing for Dolby Surround Wide Normal PhantomIf necessary, adjust the speaker output balance as follows Left front Center Right front Speaker Rear speakersPress Test to start checking the speaker output balance Press Test again to stop the test toneUsing Dolby Surround LOGIC, Hall lights up on the displayAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingUsing the Remote Control SEA Surround Control ON/OFF Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM MW/LW tunerGeneral EN, GE, FR, NL, SP, IT 0497OFYOTKJEM

RX-430VBK specifications

The JVC RX-430VBK is a versatile stereo receiver that has captured the attention of audio enthusiasts and casual listeners alike. Designed for those who appreciate quality sound in a compact format, this receiver comes packed with features that enhance its functionality and audio performance.

One of the main highlights of the RX-430VBK is its power output, delivering a robust 100 watts per channel. This power capacity ensures clear and dynamic sound reproduction, making it suitable for a wide range of listening environments. Whether you are enjoying music, watching movies, or gaming, the RX-430VBK provides an immersive audio experience that brings your media to life.

The receiver features a built-in AM/FM tuner, allowing users to easily access their favorite radio stations. The tuner is equipped with a preset channel memory, letting users store up to 30 stations for quick access. This feature is especially convenient for those who enjoy a mix of local and national broadcasts.

For connectivity, the JVC RX-430VBK is well-equipped with multiple inputs and outputs, including five audio inputs and a dedicated phono input for turntables. This makes it an ideal choice for vinyl enthusiasts who want to connect their record player without the need for additional preamps. Additionally, it includes a headphone jack for private listening, as well as speaker outputs that support either A or B configurations, allowing for flexible setups.

Another standout feature of the RX-430VBK is its built-in digital signal processing (DSP). This technology enables users to tailor their audio experience with various sound modes such as Hall, Jazz, and Rock, which enhance the listening experience depending on the genre. The built-in EQ further allows for fine-tuning the audio output, helping users achieve their desired sound profile.

From a design perspective, the RX-430VBK boasts a sleek and modern aesthetic that fits comfortably into most home entertainment setups. Its user-friendly interface and remote control make it easy to navigate settings and manage playback from a distance.

In summary, the JVC RX-430VBK is a powerful and feature-rich stereo receiver that caters to a broad range of audio preferences and setups. With its solid power output, versatile connectivity options, and innovative sound technologies, it stands out as a strong choice for anyone looking to enhance their audio experience at home.
Top Page Image Contents