JVC RX-430VBK manual Using Dolby Surround, LOGIC, Hall lights up on the display

Using Dolby Surround

Once you have set the Dolby Surround adjustments, you can use the same adjustments every time you want to enjoy Dolby Surround.

On the front panel:

SURROUND 1. Press SURROUND so that the Control % / Þbuttons work for selecting the surround modes.

The lamp above the button lights up.

2. Press Control %/ Þuntil “PROLOGIC” or “3CHLOGIC” whichever you want appears on the display.

The PRO LOGIC or 3CH LOGIC indicator also lights up.

Each time you press the button, the surround modes change as follows:

PROLOGIC 3CHLOGIC HALL

OFF

The indicator of the selected surround mode lights up in turn as you select the surround modes.

3.Select and play a sound source which was processed with Dolby Surround and is labeled with

DOLBY SURROUND mark.

To cancel Dolby Surround, select “OFF” in step 2 above. The indicator of the selected mode goes off.

	From the remote control:
SURROUND	1.	Press SURROUND ON/OFF so that one of the surround mode indicators (PRO LOGIC, 3CH
ON/OFF		LOGIC, HALL) lights up on the display.
		The previous mode is recalled (at its previous settings) and is shown on the display.
		Each time you press the button, the surround mode turns on and off.
AUDIO	2.	Press AUDIO CONTROL so that 10 keys work for adjusting the sound.
CONTROL

3. If necessary, press SURR MODE until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the display.

Each time you press the button, the surround modes change as follows:

SURR MODE	PROLOGIC	3CHLOGIC	HALL
6

The indicator of the selected surround mode lights up in turn as you select the surround modes.

4.Select and play a sound source which was processed with Dolby Surround and is labeled with

DOLBY SURROUND mark.

To cancel Dolby Surround, press SURROUND ON/OFF so that the indicator of the selected mode goes off.

Each time you press the button, the surround mode turns on and off.

English

Page 26