JVC RX-5050B, RX-5052S manual Activating the Surround Modes, Select and play any source

Page 27

Activating the Surround Modes

Available Surround modes vary depending on the incoming signals.

Activating one of the Surround modes for a source automatically recalls the memorized settings and adjustments (see pages 16 to 22).

•For analog sources and digital 2-channel software, you can select one of the following Surround modes. Each time you press SURROUND, Surround modes change as follows:

PRO LOGIC

Activating the Surround Modes

Automatically

You can enjoy the Surround mode simply by selecting the source (with digital input selected for that source).

•Auto Surround also works when the input mode changes from analog to digital.

To activate Auto Surround, see page 20.

Activating the Surround Modes Manually

PLII MOVIE

 

PLII MUSIC

 

(Dolby Pro Logic II Movie)

 

(Dolby Pro Logic II Music)

•For Dual Mono software, you can select the channel you listen to. (See page 19.)

DUAL MONO

To adjust the speaker output level, see page 22.

To cancel the Surround mode

Press SURROUND/DSP OFF.

1Select and play any source.

•Make sure you have selected the analog or digital input mode correctly.

2Press SURROUND to activate the Surround mode.

•For Dolby Digital multi-channel digital software (except

2-channel and Dual Mono software), incoming signals are automatically detected and “DOLBY DIGITAL” is activated.

•For DTS multi-channel digital software (except 2-channel and Dual Mono software), incoming signals are automatically detected and “DTS SURROUND” is activated.

When playing Dolby Digital Surround EX or DTS-ES software

You can enjoy Virtual 6.1-channel playback using Virtual Surround Back.

To activate Virtual Surround Back, see page 20.

VIRTUAL SB

SB

Note:

When the Dolby Digital or DTS multi-channel digital signal stops coming in, “PLII MOVIE” will be activated.

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents LVT1290-001A J RX-5050B/RX-5052SMises en garde, précautions et indications diverses Table of Contents Parts Identification Front PanelDisplay Rear Panel Remote ControlPutting Batteries in the Remote Control Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesTurn the loop until you have the best reception Connecting the Speakers and SubwooferConnecting the speakers AM antenna connectionsPlacing speakers Connecting Audio/Video ComponentsConnecting the subwoofer Analog ConnectionsVideo component connections To audio output To composite video inputDVD player Connecting the Power Cord Plug the power cord into an AC outletDigital Connections Daily Operational Procedure Selecting the Source to Play Turning On the PowerBasic Operations Picture from a video component such as the VCR or DVD Adjusting the VolumeWhen analog input is selected Always lights up SoundPress Subwoofer OUT ON/OFF to cancel the subwoofer output Selecting the Analog or Digital Input ModeListening with headphones Be sure to turn down the volumePress Dimmer When Dolby Digital or DTS Surround is selectedTo select the analog input mode Changing the Display BrightnessRecording a source Using the Sleep TimerBasic adjustment auto memory Muting the SoundPress FM/AM to select the band FM or AM Tuning in to Stations ManuallyUsing Preset Tuning Receiving Radio BroadcastsTo tune in a preset station Press the 10 keys to select a preset channel numberSelecting the FM Reception Mode While listening to an FM station, press FM ModePress in Multi JOG Push SET Basic SettingsPress Quick Speaker Setup Channel numberBasic Setting Items Press SettingEx. When setting Auto Surround to Auto Surr on Setting the Speakers Setting the Speaker DistanceSetting the Bass Sounds Select the playback sounds channel Selecting the Main or Sub ChannelSelect Vrtl SB on to activate Virtual Surround Back Setting for Easy and Effective Surround OperationsSetting the Digital Input Terminals Select Auto Surr on to activate Auto SurroundEx. When adjusting the subwoofer level to Adjusting SoundBasic Adjustment Items Press AdjustAdjusting the Speaker Output Levels Adjusting the Equalization PatternsDolby Digital 5.1CH Using the Surround ModesReproducing Theater Ambience Introducing the Surround Modes Dolby Digital*1DTS 96/24 What is Linear PCM?What is Dual Mono? DTS Digital SurroundPress Surround to activate the Surround mode Activating the Surround ModesSelect and play any source Digital Acoustic Processor DAP modes Using the DSP ModesReproducing the Sound Field Introducing the DSP ModesActivating the DSP Modes To cancel the DSP modeTo adjust the effect level except All Channel Stereo, see Multi-channel digital signalsTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierSet TV/CATV selector to TV Operating Video ComponentsCD changer DVD playerTry to operate your TV by pressing If there are more than one code listed for your brand of TVRelease STANDBY/ON TV/CATV Try to operate your Catv converter by pressingTry to operate your VCR by pressing If there are more than one code listed for your brandRelease STANDBY/ON VCR Release STANDBY/ON DVDProblem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalFM tuner IHF AM tunerGeneral Page Page AUDIO/VIDEO Control Receiver LVT1290-002A C Mises en garde, précautions et indications diverses English RX-6030VAUDIO/VIDEO Control Receiver Remote Control Do not insert any metal object into the receiver Right Getting Started DVD player Connecting the Power Cord Basic Operations Basic Operations Turning On and Off Attenuating the Input Signal Muting the Sound Tuning in to Stations Manually Selecting the FM Reception Mode Basic Settings Basic Procedure Basic Settings Selecting the Main or Sub Channel Setting for Easy and Effective Surround Operations Adjusting Sound Adjusting Sound Using the Surround Modes Using the Surround Modes Activating the Surround Modes Using the DSP Modes Activating the DSP Modes Operating JVC’s Audio/Video Components Operating Video Components Operating Other Manufacturers’ Video Equipment STANDBY/ON VCR Subwoofer no Specifications Specifications EN, FR

RX-5052S, RX-5050B specifications

The JVC RX-5050B and RX-5052S are solid audio receivers that have appealed to home theater enthusiasts and casual listeners alike. Both models, known for their reliability and robust sound quality, present advanced features tailored for an immersive audio experience.

One of the standout features of the RX-5050B and RX-5052S is their high power output. These receivers are equipped with powerful amplification systems that permit them to deliver clear, dynamic sound across a wide range of frequencies. With a total harmonic distortion (THD) of less than 0.05%, these receivers ensure that the audio remains clean and true to the source material. This clarity allows listeners to appreciate subtle details in both music and movie soundtracks.

The RX-5050B and RX-5052S utilize JVC's proprietary technologies to enhance audio performance. This includes the Virtual Surround feature, which creates an expansive soundstage, making it feel as if sound is emanating from all around the listener. Furthermore, these models support a variety of audio formats, catering to diverse preferences from stereo sound to multi-channel audio setups.

Another key highlight of the RX-5050B and RX-5052S is their versatility with connectivity. Equipped with multiple inputs, including standard RCA connections, optical inputs, and coaxial inputs, these receivers can easily connect to a wide range of devices, such as DVD players, game consoles, and streaming devices. This versatility means that users can enjoy audio from various sources seamlessly.

In terms of build quality, both models feature a sturdy design that contributes to their longevity. The user interface is straightforward, allowing for easy navigation through settings and adjustments. The front panel includes a large volume knob, an AM/FM tuner, and dedicated buttons for essential functions, providing an intuitive experience for users of all ages.

Whether you're a movie buff looking to enhance your home theater setup or a music lover wanting to enjoy your favorite albums with pristine sound, the JVC RX-5050B and RX-5052S stand out as excellent choices. Their combination of power, sound processing technology, and ease of use make them reliable components in any audio setup. With the durability and performance offered by these receivers, users can expect a satisfying auditory experience for many years to come.
Top Page Image Contents