JVC RX-5050B Release STANDBY/ON VCR, Release STANDBY/ON DVD, Try to operate your VCR by pressing

Page 33

To change the transmittable signals for operating another manufacturer’s VCR

1Press and hold STANDBY/ON VCR.

2Press VCR.

3Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

JVC

01*, 02, 03

Emerson

10, 22

Gold Star

11

Hitachi

04

Mitsubishi

12

NEC

21

Panasonic

07, 13

Philips

09

RCA

05, 06

Samsung

20

Sanyo

17, 18, 19

Sony

14, 15, 16

Zenith

08

* “01” is the initial setting.

4 Release STANDBY/ON VCR.

Now you can perform the following operations on the VCR:

STANDBY/ON

VCR: Turn on and off the VCR.

VCR CH +/–:

Change the TV channels on the

 

VCR.

After pressing VCR, you can perform the following operations on the VCR:

To change the transmittable signals for operating another manufacturer’s DVD player

1Press and hold STANDBY/ON DVD.

2Press DVD.

3Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

JVC

01*

Panasonic

02

Philips

04

Pioneer

03

Sony

05

Toshiba

06

Yamaha

07

* “01” is the initial setting.

4 Release STANDBY/ON DVD.

Now you can perform the following operations on the DVD player:

STANDBY/ON DVD: Turn on and off the DVD player.

After pressing DVD, you can perform the following operations on the DVD player:

3: Start playing.

4: Return to the beginning of the current (or previous) chapter (or fast reverse for some models).

¢: Skip to the beginning of the next chapter (or fast forward for some models).

7: Stop playing.

8: Pause playing. To resume, press 3.

3:

Start playing.

REW:

Rewind the tape.

FF:Fast-forward the tape.

7:Stop playing or recording.

8:Pause playing. To resume, press 3.

REC PAUSE: Enter recording pause.

To start recording, press this button then 3.

5 Try to operate your VCR by pressing

STANDBY/ON VCR.

After pressing DVD, these buttons can be used for the DVD menu operations.

Note:

For detailed menu operations, refer to

the instructions supplied with the discs or the DVD player.

2

46

MENU

7/P 8

ENTER

10

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

5 Try to operate your DVD player by pressing

STANDBY/ON DVD.

When your DVD player turns on or off, you have entered the correct code.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents LVT1290-001A J RX-5050B/RX-5052SMises en garde, précautions et indications diverses Table of Contents Parts Identification Front PanelDisplay Rear Panel Remote ControlConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Putting Batteries in the Remote ControlConnecting the speakers Connecting the Speakers and SubwooferAM antenna connections Turn the loop until you have the best receptionConnecting the subwoofer Connecting Audio/Video ComponentsAnalog Connections Placing speakersVideo component connections To audio output To composite video inputDVD player Connecting the Power Cord Plug the power cord into an AC outletDigital Connections Daily Operational Procedure Selecting the Source to Play Turning On the PowerBasic Operations When analog input is selected Always lights up Adjusting the VolumeSound Picture from a video component such as the VCR or DVDListening with headphones Selecting the Analog or Digital Input ModeBe sure to turn down the volume Press Subwoofer OUT ON/OFF to cancel the subwoofer outputTo select the analog input mode When Dolby Digital or DTS Surround is selectedChanging the Display Brightness Press DimmerBasic adjustment auto memory Using the Sleep TimerMuting the Sound Recording a sourceUsing Preset Tuning Tuning in to Stations ManuallyReceiving Radio Broadcasts Press FM/AM to select the band FM or AMSelecting the FM Reception Mode Press the 10 keys to select a preset channel numberWhile listening to an FM station, press FM Mode To tune in a preset stationPress Quick Speaker Setup Basic SettingsChannel number Press in Multi JOG Push SETBasic Setting Items Press SettingEx. When setting Auto Surround to Auto Surr on Setting the Speakers Setting the Speaker DistanceSetting the Bass Sounds Select the playback sounds channel Selecting the Main or Sub ChannelSetting the Digital Input Terminals Setting for Easy and Effective Surround OperationsSelect Auto Surr on to activate Auto Surround Select Vrtl SB on to activate Virtual Surround BackBasic Adjustment Items Adjusting SoundPress Adjust Ex. When adjusting the subwoofer level toAdjusting the Speaker Output Levels Adjusting the Equalization PatternsReproducing Theater Ambience Introducing the Surround Modes Using the Surround ModesDolby Digital*1 Dolby Digital 5.1CHWhat is Dual Mono? What is Linear PCM?DTS Digital Surround DTS 96/24Press Surround to activate the Surround mode Activating the Surround ModesSelect and play any source Reproducing the Sound Field Using the DSP ModesIntroducing the DSP Modes Digital Acoustic Processor DAP modesTo adjust the effect level except All Channel Stereo, see To cancel the DSP modeMulti-channel digital signals Activating the DSP ModesOperating Audio Components Operating JVC’s Audio/Video ComponentsSound control section Amplifier TunerCD changer Operating Video ComponentsDVD player Set TV/CATV selector to TVRelease STANDBY/ON TV/CATV If there are more than one code listed for your brand of TVTry to operate your Catv converter by pressing Try to operate your TV by pressingRelease STANDBY/ON VCR If there are more than one code listed for your brandRelease STANDBY/ON DVD Try to operate your VCR by pressingProblem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF AM tunerGeneral Page Page AUDIO/VIDEO Control Receiver LVT1290-002A C Mises en garde, précautions et indications diverses English RX-6030VAUDIO/VIDEO Control Receiver Remote Control Do not insert any metal object into the receiver Right Getting Started DVD player Connecting the Power Cord Basic Operations Basic Operations Turning On and Off Attenuating the Input Signal Muting the Sound Tuning in to Stations Manually Selecting the FM Reception Mode Basic Settings Basic Procedure Basic Settings Selecting the Main or Sub Channel Setting for Easy and Effective Surround Operations Adjusting Sound Adjusting Sound Using the Surround Modes Using the Surround Modes Activating the Surround Modes Using the DSP Modes Activating the DSP Modes Operating JVC’s Audio/Video Components Operating Video Components Operating Other Manufacturers’ Video Equipment STANDBY/ON VCR Subwoofer no Specifications Specifications EN, FR

RX-5052S, RX-5050B specifications

The JVC RX-5050B and RX-5052S are solid audio receivers that have appealed to home theater enthusiasts and casual listeners alike. Both models, known for their reliability and robust sound quality, present advanced features tailored for an immersive audio experience.

One of the standout features of the RX-5050B and RX-5052S is their high power output. These receivers are equipped with powerful amplification systems that permit them to deliver clear, dynamic sound across a wide range of frequencies. With a total harmonic distortion (THD) of less than 0.05%, these receivers ensure that the audio remains clean and true to the source material. This clarity allows listeners to appreciate subtle details in both music and movie soundtracks.

The RX-5050B and RX-5052S utilize JVC's proprietary technologies to enhance audio performance. This includes the Virtual Surround feature, which creates an expansive soundstage, making it feel as if sound is emanating from all around the listener. Furthermore, these models support a variety of audio formats, catering to diverse preferences from stereo sound to multi-channel audio setups.

Another key highlight of the RX-5050B and RX-5052S is their versatility with connectivity. Equipped with multiple inputs, including standard RCA connections, optical inputs, and coaxial inputs, these receivers can easily connect to a wide range of devices, such as DVD players, game consoles, and streaming devices. This versatility means that users can enjoy audio from various sources seamlessly.

In terms of build quality, both models feature a sturdy design that contributes to their longevity. The user interface is straightforward, allowing for easy navigation through settings and adjustments. The front panel includes a large volume knob, an AM/FM tuner, and dedicated buttons for essential functions, providing an intuitive experience for users of all ages.

Whether you're a movie buff looking to enhance your home theater setup or a music lover wanting to enjoy your favorite albums with pristine sound, the JVC RX-5050B and RX-5052S stand out as excellent choices. Their combination of power, sound processing technology, and ease of use make them reliable components in any audio setup. With the durability and performance offered by these receivers, users can expect a satisfying auditory experience for many years to come.
Top Page Image Contents