JVC RX-5050B, RX-5052S manual Connecting the Power Cord

Page 49

Getting Started

Do not connect the AC power cord until all other connections

 

have been made.

 

 

 

 

 

 

 

English

Digital Connections

By connecting the receiver and the source component through the digital terminals, sound reproduction quality will be much improved. In addition, you can enjoy multi-channel reproduction and some other convenient functions.

IMPORTANT:

•When connecting a video component using the digital terminals, you also need to connect it to the video jacks on the rear. Without connecting it to the video jacks, you can view no playback picture.

•After connecting the components using the DIGITAL IN terminals, set the following correctly if necessary.

–Set the digital input (DIGITAL IN) terminal setting correctly. For details, see “Setting the Digital Input Terminals” on page 20.

–Select the digital input mode correctly. For details, see

“Selecting the Analog or Digital Input Mode” on page 11.

Digital input terminals

You can connect any digital components having coaxial or optical digital output terminal.

Digital coaxial cable (not supplied) between digital coaxial terminals

Digital optical cable (not supplied) between digital optical terminals

When the component has a digital

 

coaxial output terminal, connect it to

DIGITAL 1

the DIGITAL 1 (DVD) terminal, using a

(DVD)

digital coaxial cable (not supplied).

 

Note:

When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:

–DIGITAL 1 (coaxial): For DVD player

–DIGITAL 2 (optical): For CD player

Connecting the Power Cord

Before plugging the receiver into an AC outlet, make sure that all connections have been made.

Plug the power cord into an AC outlet.

Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.

Note:

The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:

–When you unplug the power cord.

–When a power failure occurs.

CAUTIONS:

•Do not touch the power cord with wet hands.

•Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

 

DIGITAL 2 (CD)

When the component has a digital

 

optical output terminal, connect it to the

DIGITAL IN

DIGITAL 2 (CD) terminal, using a digital

optical cable (not supplied).

 

Before connecting a digital

 

optical cable, unplug the

 

protective plug.

 

8

Page 48 Page 50
Image 49
Page 48 Page 50
Contents LVT1290-001A J RX-5050B/RX-5052SMises en garde, précautions et indications diverses Table of Contents Front Panel Parts IdentificationDisplay Rear Panel Remote ControlConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Putting Batteries in the Remote ControlConnecting the speakers Connecting the Speakers and SubwooferAM antenna connections Turn the loop until you have the best receptionConnecting the subwoofer Connecting Audio/Video ComponentsAnalog Connections Placing speakersTo audio output To composite video input Video component connectionsDVD player Plug the power cord into an AC outlet Connecting the Power CordDigital Connections Turning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations When analog input is selected Always lights up Adjusting the VolumeSound Picture from a video component such as the VCR or DVDListening with headphones Selecting the Analog or Digital Input ModeBe sure to turn down the volume Press Subwoofer OUT ON/OFF to cancel the subwoofer outputTo select the analog input mode When Dolby Digital or DTS Surround is selectedChanging the Display Brightness Press DimmerBasic adjustment auto memory Using the Sleep TimerMuting the Sound Recording a sourceUsing Preset Tuning Tuning in to Stations ManuallyReceiving Radio Broadcasts Press FM/AM to select the band FM or AMSelecting the FM Reception Mode Press the 10 keys to select a preset channel numberWhile listening to an FM station, press FM Mode To tune in a preset stationPress Quick Speaker Setup Basic SettingsChannel number Press in Multi JOG Push SETPress Setting Basic Setting ItemsEx. When setting Auto Surround to Auto Surr on Setting the Speaker Distance Setting the SpeakersSetting the Bass Sounds Select the playback sounds channel Selecting the Main or Sub ChannelSetting the Digital Input Terminals Setting for Easy and Effective Surround OperationsSelect Auto Surr on to activate Auto Surround Select Vrtl SB on to activate Virtual Surround BackBasic Adjustment Items Adjusting SoundPress Adjust Ex. When adjusting the subwoofer level toAdjusting the Speaker Output Levels Adjusting the Equalization PatternsReproducing Theater Ambience Introducing the Surround Modes Using the Surround ModesDolby Digital*1 Dolby Digital 5.1CHWhat is Dual Mono? What is Linear PCM?DTS Digital Surround DTS 96/24Activating the Surround Modes Press Surround to activate the Surround modeSelect and play any source Reproducing the Sound Field Using the DSP ModesIntroducing the DSP Modes Digital Acoustic Processor DAP modesTo adjust the effect level except All Channel Stereo, see To cancel the DSP modeMulti-channel digital signals Activating the DSP ModesOperating Audio Components Operating JVC’s Audio/Video ComponentsSound control section Amplifier TunerCD changer Operating Video ComponentsDVD player Set TV/CATV selector to TVRelease STANDBY/ON TV/CATV If there are more than one code listed for your brand of TVTry to operate your Catv converter by pressing Try to operate your TV by pressingRelease STANDBY/ON VCR If there are more than one code listed for your brandRelease STANDBY/ON DVD Try to operate your VCR by pressingProblem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionAM tuner FM tuner IHFGeneral Page Page AUDIO/VIDEO Control Receiver LVT1290-002A C Mises en garde, précautions et indications diverses English RX-6030VAUDIO/VIDEO Control Receiver Remote Control Do not insert any metal object into the receiver Right Getting Started DVD player Connecting the Power Cord Basic Operations Basic Operations Turning On and Off Attenuating the Input Signal Muting the Sound Tuning in to Stations Manually Selecting the FM Reception Mode Basic Settings Basic Procedure Basic Settings Selecting the Main or Sub Channel Setting for Easy and Effective Surround Operations Adjusting Sound Adjusting Sound Using the Surround Modes Using the Surround Modes Activating the Surround Modes Using the DSP Modes Activating the DSP Modes Operating JVC’s Audio/Video Components Operating Video Components Operating Other Manufacturers’ Video Equipment STANDBY/ON VCR Subwoofer no Specifications Specifications EN, FR

RX-5052S, RX-5050B specifications

The JVC RX-5050B and RX-5052S are solid audio receivers that have appealed to home theater enthusiasts and casual listeners alike. Both models, known for their reliability and robust sound quality, present advanced features tailored for an immersive audio experience.

One of the standout features of the RX-5050B and RX-5052S is their high power output. These receivers are equipped with powerful amplification systems that permit them to deliver clear, dynamic sound across a wide range of frequencies. With a total harmonic distortion (THD) of less than 0.05%, these receivers ensure that the audio remains clean and true to the source material. This clarity allows listeners to appreciate subtle details in both music and movie soundtracks.

The RX-5050B and RX-5052S utilize JVC's proprietary technologies to enhance audio performance. This includes the Virtual Surround feature, which creates an expansive soundstage, making it feel as if sound is emanating from all around the listener. Furthermore, these models support a variety of audio formats, catering to diverse preferences from stereo sound to multi-channel audio setups.

Another key highlight of the RX-5050B and RX-5052S is their versatility with connectivity. Equipped with multiple inputs, including standard RCA connections, optical inputs, and coaxial inputs, these receivers can easily connect to a wide range of devices, such as DVD players, game consoles, and streaming devices. This versatility means that users can enjoy audio from various sources seamlessly.

In terms of build quality, both models feature a sturdy design that contributes to their longevity. The user interface is straightforward, allowing for easy navigation through settings and adjustments. The front panel includes a large volume knob, an AM/FM tuner, and dedicated buttons for essential functions, providing an intuitive experience for users of all ages.

Whether you're a movie buff looking to enhance your home theater setup or a music lover wanting to enjoy your favorite albums with pristine sound, the JVC RX-5050B and RX-5052S stand out as excellent choices. Their combination of power, sound processing technology, and ease of use make them reliable components in any audio setup. With the durability and performance offered by these receivers, users can expect a satisfying auditory experience for many years to come.
Top Page Image Contents