JVC RX-5050B, RX-5052S manual Tuning in to Stations Manually

Page 55

English

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

Tuning in to Stations Manually

Remote

Using Preset Tuning

 

NOT

 

1 Press FM/AM to select the band (FM or AM).

Each time you press the button, the band alternates between FM and AM.

AUTO MUTING

VOLUME

TUNED STEREO AUTO MUTING

VOLUME

The last received station of the selected band is tuned in.

2Press FM/AM TUNING 5 or ∞ repeatedly until you find the frequency you want.

•Pressing FM/AM TUNING 5 increases the frequency.

•Pressing FM/AM TUNING ∞ decreases the frequency.

TUNED STEREO AUTO MUTING

VOLUME

Notes:

•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

•When an FM stereo program is received, the STEREO indicator also lights up.

•When you hold and then release the button in step 2, the frequency keeps changing until a station is tuned in.

Once a station is assigned to a channel number, the station can be quickly tuned in. You can preset up to 30 FM and 15 AM stations.

To store the preset stations

Remote

Before you start, remember...

NOT

 

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1Tune in the station you want to preset (see “Tuning in to Stations Manually”).

•If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the FM Reception Mode” on page 15.

2Press MEMORY.

TUNED STEREO AUTO MUTING

VOLUME

The channel number position starts flashing on the display for about 5 seconds.

3Press FM/AM PRESET 5 or ∞ to select a channel number while the channel number position is flashing.

TUNED STEREO AUTO MUTING

VOLUME

4 Press MEMORY again while the selected channel number is flashing on the display.

The selected channel number stops flashing.

The station is assigned to the selected channel number.

5Repeat steps 1 to 4 until you store all the stations you want.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

14

Page 54 Page 56
Image 55
Page 54 Page 56
Contents LVT1290-001A J RX-5050B/RX-5052SMises en garde, précautions et indications diverses Table of Contents Front Panel Parts IdentificationDisplay Rear Panel Remote ControlPutting Batteries in the Remote Control Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesTurn the loop until you have the best reception Connecting the Speakers and SubwooferConnecting the speakers AM antenna connectionsPlacing speakers Connecting Audio/Video ComponentsConnecting the subwoofer Analog ConnectionsTo audio output To composite video input Video component connectionsDVD player Plug the power cord into an AC outlet Connecting the Power CordDigital Connections Turning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations Picture from a video component such as the VCR or DVD Adjusting the VolumeWhen analog input is selected Always lights up SoundPress Subwoofer OUT ON/OFF to cancel the subwoofer output Selecting the Analog or Digital Input ModeListening with headphones Be sure to turn down the volumePress Dimmer When Dolby Digital or DTS Surround is selectedTo select the analog input mode Changing the Display BrightnessRecording a source Using the Sleep TimerBasic adjustment auto memory Muting the SoundPress FM/AM to select the band FM or AM Tuning in to Stations ManuallyUsing Preset Tuning Receiving Radio BroadcastsTo tune in a preset station Press the 10 keys to select a preset channel numberSelecting the FM Reception Mode While listening to an FM station, press FM ModePress in Multi JOG Push SET Basic SettingsPress Quick Speaker Setup Channel numberPress Setting Basic Setting ItemsEx. When setting Auto Surround to Auto Surr on Setting the Speaker Distance Setting the SpeakersSetting the Bass Sounds Select the playback sounds channel Selecting the Main or Sub ChannelSelect Vrtl SB on to activate Virtual Surround Back Setting for Easy and Effective Surround OperationsSetting the Digital Input Terminals Select Auto Surr on to activate Auto SurroundEx. When adjusting the subwoofer level to Adjusting SoundBasic Adjustment Items Press AdjustAdjusting the Speaker Output Levels Adjusting the Equalization PatternsDolby Digital 5.1CH Using the Surround ModesReproducing Theater Ambience Introducing the Surround Modes Dolby Digital*1DTS 96/24 What is Linear PCM?What is Dual Mono? DTS Digital SurroundActivating the Surround Modes Press Surround to activate the Surround modeSelect and play any source Digital Acoustic Processor DAP modes Using the DSP ModesReproducing the Sound Field Introducing the DSP ModesActivating the DSP Modes To cancel the DSP modeTo adjust the effect level except All Channel Stereo, see Multi-channel digital signalsTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierSet TV/CATV selector to TV Operating Video ComponentsCD changer DVD playerTry to operate your TV by pressing If there are more than one code listed for your brand of TVRelease STANDBY/ON TV/CATV Try to operate your Catv converter by pressingTry to operate your VCR by pressing If there are more than one code listed for your brandRelease STANDBY/ON VCR Release STANDBY/ON DVDProblem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalAM tuner FM tuner IHFGeneral Page Page AUDIO/VIDEO Control Receiver LVT1290-002A C Mises en garde, précautions et indications diverses English RX-6030VAUDIO/VIDEO Control Receiver Remote Control Do not insert any metal object into the receiver Right Getting Started DVD player Connecting the Power Cord Basic Operations Basic Operations Turning On and Off Attenuating the Input Signal Muting the Sound Tuning in to Stations Manually Selecting the FM Reception Mode Basic Settings Basic Procedure Basic Settings Selecting the Main or Sub Channel Setting for Easy and Effective Surround Operations Adjusting Sound Adjusting Sound Using the Surround Modes Using the Surround Modes Activating the Surround Modes Using the DSP Modes Activating the DSP Modes Operating JVC’s Audio/Video Components Operating Video Components Operating Other Manufacturers’ Video Equipment STANDBY/ON VCR Subwoofer no Specifications Specifications EN, FR

RX-5052S, RX-5050B specifications

The JVC RX-5050B and RX-5052S are solid audio receivers that have appealed to home theater enthusiasts and casual listeners alike. Both models, known for their reliability and robust sound quality, present advanced features tailored for an immersive audio experience.

One of the standout features of the RX-5050B and RX-5052S is their high power output. These receivers are equipped with powerful amplification systems that permit them to deliver clear, dynamic sound across a wide range of frequencies. With a total harmonic distortion (THD) of less than 0.05%, these receivers ensure that the audio remains clean and true to the source material. This clarity allows listeners to appreciate subtle details in both music and movie soundtracks.

The RX-5050B and RX-5052S utilize JVC's proprietary technologies to enhance audio performance. This includes the Virtual Surround feature, which creates an expansive soundstage, making it feel as if sound is emanating from all around the listener. Furthermore, these models support a variety of audio formats, catering to diverse preferences from stereo sound to multi-channel audio setups.

Another key highlight of the RX-5050B and RX-5052S is their versatility with connectivity. Equipped with multiple inputs, including standard RCA connections, optical inputs, and coaxial inputs, these receivers can easily connect to a wide range of devices, such as DVD players, game consoles, and streaming devices. This versatility means that users can enjoy audio from various sources seamlessly.

In terms of build quality, both models feature a sturdy design that contributes to their longevity. The user interface is straightforward, allowing for easy navigation through settings and adjustments. The front panel includes a large volume knob, an AM/FM tuner, and dedicated buttons for essential functions, providing an intuitive experience for users of all ages.

Whether you're a movie buff looking to enhance your home theater setup or a music lover wanting to enjoy your favorite albums with pristine sound, the JVC RX-5050B and RX-5052S stand out as excellent choices. Their combination of power, sound processing technology, and ease of use make them reliable components in any audio setup. With the durability and performance offered by these receivers, users can expect a satisfying auditory experience for many years to come.
Top Page Image Contents