JVC RX-5052S, RX-5050B manual Right

Page 46

Do not connect the AC power cord until all other connections have been made.

AM antenna connections

Connecting the Speakers and Subwoofer

 

English

AM

EXT

AM

LOOP

FM 75

COAXIAL

ANTENNA

AM Loop Antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

You can connect five speakers (a pair of front speakers, a center speaker, and a pair of surround speakers) and a subwoofer.

CAUTIONS:

•Use only the speakers of the SPEAKER IMPEDANCE indicated by the speaker terminals.

•Do not connect more than one speaker to each speaker terminal.

Connecting the speakers

1

2

3

4

 

LEFT

LEFT

 

LEFT

 

+

 

RIGHT

+

RIGHT

+

–

–

–

1

2

3

Outdoor single vinyl-covered wire (not supplied)

Turn the loop until you have the best reception.

Notes:

• If the AM loop antenna wire is covered with vinyl, remove the vinyl by twisting it as illustrated.

•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. This could cause poor reception.

•If reception is poor, connect an outdoor single vinyl-covered wire (not supplied) to the AM EXT terminal. (Keep the AM loop antenna connected.)

1Twist and remove the insulation at the end of each speaker cord.

2Press and hold the clamp of the speaker terminal.

3Insert the speaker cord.

4Release the finger from the clamp.

For each speaker (except for a subwoofer), connect the (+) and

(–)terminals on the rear panel to the (+) and (–) terminals marked on the speakers.

 

 

 

 

:

IMPEDANCE

 

 

 

CAUTION

 

 

 

 

 

SPEAKER16

 

 

 

—

 

 

 

 

 

8

 

 

 

 

FRONT

 

 

 

 

SURROUND

SPEAKERS

+

 

 

 

 

 

 

 

 

 

 

 

CENTER

 

 

–

 

 

 

 

 

 

 

SPEAKER

 

 

 

 

 

+

To left

–

front speaker

 

 

To left surround

To center speaker

speaker

To right front speaker

 

To right surround speaker

 

5

Page 45 Page 47
Image 46
Page 45 Page 47
Contents RX-5050B/RX-5052S LVT1290-001A JMises en garde, précautions et indications diverses Table of Contents Front Panel Parts IdentificationDisplay Remote Control Rear PanelChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Putting Batteries in the Remote ControlAM antenna connections Connecting the Speakers and SubwooferConnecting the speakers Turn the loop until you have the best receptionAnalog Connections Connecting Audio/Video ComponentsConnecting the subwoofer Placing speakersTo audio output To composite video input Video component connectionsDVD player Plug the power cord into an AC outlet Connecting the Power CordDigital Connections Turning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations Sound Adjusting the VolumeWhen analog input is selected Always lights up Picture from a video component such as the VCR or DVDBe sure to turn down the volume Selecting the Analog or Digital Input ModeListening with headphones Press Subwoofer OUT ON/OFF to cancel the subwoofer outputChanging the Display Brightness When Dolby Digital or DTS Surround is selectedTo select the analog input mode Press DimmerMuting the Sound Using the Sleep TimerBasic adjustment auto memory Recording a sourceReceiving Radio Broadcasts Tuning in to Stations ManuallyUsing Preset Tuning Press FM/AM to select the band FM or AMWhile listening to an FM station, press FM Mode Press the 10 keys to select a preset channel numberSelecting the FM Reception Mode To tune in a preset stationChannel number Basic SettingsPress Quick Speaker Setup Press in Multi JOG Push SETPress Setting Basic Setting ItemsEx. When setting Auto Surround to Auto Surr on Setting the Speaker Distance Setting the SpeakersSetting the Bass Sounds Selecting the Main or Sub Channel Select the playback sounds channelSelect Auto Surr on to activate Auto Surround Setting for Easy and Effective Surround OperationsSetting the Digital Input Terminals Select Vrtl SB on to activate Virtual Surround BackPress Adjust Adjusting SoundBasic Adjustment Items Ex. When adjusting the subwoofer level toAdjusting the Equalization Patterns Adjusting the Speaker Output LevelsDolby Digital*1 Using the Surround ModesReproducing Theater Ambience Introducing the Surround Modes Dolby Digital 5.1CHDTS Digital Surround What is Linear PCM?What is Dual Mono? DTS 96/24Activating the Surround Modes Press Surround to activate the Surround modeSelect and play any source Introducing the DSP Modes Using the DSP ModesReproducing the Sound Field Digital Acoustic Processor DAP modesMulti-channel digital signals To cancel the DSP modeTo adjust the effect level except All Channel Stereo, see Activating the DSP ModesSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerDVD player Operating Video ComponentsCD changer Set TV/CATV selector to TVTry to operate your Catv converter by pressing If there are more than one code listed for your brand of TVRelease STANDBY/ON TV/CATV Try to operate your TV by pressingRelease STANDBY/ON DVD If there are more than one code listed for your brandRelease STANDBY/ON VCR Try to operate your VCR by pressingTroubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionAM tuner FM tuner IHFGeneral Page Page AUDIO/VIDEO Control Receiver LVT1290-002A C Mises en garde, précautions et indications diverses English RX-6030VAUDIO/VIDEO Control Receiver Remote Control Do not insert any metal object into the receiver Right Getting Started DVD player Connecting the Power Cord Basic Operations Basic Operations Turning On and Off Attenuating the Input Signal Muting the Sound Tuning in to Stations Manually Selecting the FM Reception Mode Basic Settings Basic Procedure Basic Settings Selecting the Main or Sub Channel Setting for Easy and Effective Surround Operations Adjusting Sound Adjusting Sound Using the Surround Modes Using the Surround Modes Activating the Surround Modes Using the DSP Modes Activating the DSP Modes Operating JVC’s Audio/Video Components Operating Video Components Operating Other Manufacturers’ Video Equipment STANDBY/ON VCR Subwoofer no Specifications Specifications EN, FR

RX-5052S, RX-5050B specifications

The JVC RX-5050B and RX-5052S are solid audio receivers that have appealed to home theater enthusiasts and casual listeners alike. Both models, known for their reliability and robust sound quality, present advanced features tailored for an immersive audio experience.

One of the standout features of the RX-5050B and RX-5052S is their high power output. These receivers are equipped with powerful amplification systems that permit them to deliver clear, dynamic sound across a wide range of frequencies. With a total harmonic distortion (THD) of less than 0.05%, these receivers ensure that the audio remains clean and true to the source material. This clarity allows listeners to appreciate subtle details in both music and movie soundtracks.

The RX-5050B and RX-5052S utilize JVC's proprietary technologies to enhance audio performance. This includes the Virtual Surround feature, which creates an expansive soundstage, making it feel as if sound is emanating from all around the listener. Furthermore, these models support a variety of audio formats, catering to diverse preferences from stereo sound to multi-channel audio setups.

Another key highlight of the RX-5050B and RX-5052S is their versatility with connectivity. Equipped with multiple inputs, including standard RCA connections, optical inputs, and coaxial inputs, these receivers can easily connect to a wide range of devices, such as DVD players, game consoles, and streaming devices. This versatility means that users can enjoy audio from various sources seamlessly.

In terms of build quality, both models feature a sturdy design that contributes to their longevity. The user interface is straightforward, allowing for easy navigation through settings and adjustments. The front panel includes a large volume knob, an AM/FM tuner, and dedicated buttons for essential functions, providing an intuitive experience for users of all ages.

Whether you're a movie buff looking to enhance your home theater setup or a music lover wanting to enjoy your favorite albums with pristine sound, the JVC RX-5050B and RX-5052S stand out as excellent choices. Their combination of power, sound processing technology, and ease of use make them reliable components in any audio setup. With the durability and performance offered by these receivers, users can expect a satisfying auditory experience for many years to come.
Top Page Image Contents