JVC RX-5050B, RX-5052S manual Operating JVC’s Audio/Video Components

Page 69

English

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC’s components are preset in the remote control.

IMPORTANT:

To operate JVC’s audio and video components using the supplied remote control:

•When using the remote control, aim the remote control directly at the remote sensor on each component, not on the receiver.

•Refer also to the manuals supplied with your components.

•Some JVC’s VCRs can accept two types of the control signals— remote code “A” and “B.” Before using this remote control, make sure that the remote control code of the target VCR is set to code “A.”

Operating Audio Components

Sound control section (Amplifier)

You can always perform the following operations:

STANDBY/ON AUDIO:

Turn on or off the receiver.

VOLUME +/–:Adjust the volume level.

MUTING: Turn on or off sound muting.

ANALOG/DIGITAL: Switch the analog and digital input alternately.

DIMMER: Dim or brighten the display.

SLEEP:Set the Sleep Timer.

SURROUND: Turn on and select Surround modes.

DSP:Turn on and select DSP modes.

SURROUND/DSP OFF:

Turn off the Surround and DSP mode.

After pressing SOUND, you can perform the following operations by using the 10 keys:

FRONT L then LEVEL +/–:Adjust the left front speaker output

level.

FRONT R then LEVEL +/–:Adjust the right front speaker output

 

level.

CENTER then LEVEL +/–:

Adjust the center speaker output level.

SURR L then LEVEL +/–:

Adjust the left surround speaker

 

output level.

SURR R then LEVEL +/–:

Adjust the right surround speaker

 

output level.

SUBWFR then LEVEL +/–: Adjust the subwoofer output level.

EFFECT:

Adjust the effect level.

TEST:

Turn on or off test tone output.

Note:

After adjusting sounds, press the corresponding source selection button to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

Tuner

You can always perform the following operations:

FM/AM: Alternate between FM and AM.

After pressing FM/AM, you can perform the following operations on a tuner:

1 – 10, +10: Select a preset channel number directly. For channel number 5, press 5.

For channel number 15, press +10, then 5. For channel number 20, press +10, then 10.

FM MODE: Change the FM reception mode.

CD player

After pressing CD, you can perform the following operations on a CD player:

3:

Start playing.

4:

Return to the beginning of the current (or previous)

 

track.

¢:

Skip to the beginning of the next track.

7:

Stop playing.

8:

Pause playing. To resume, press 3.

1 – 10, +10: Select a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

28

Page 68 Page 70
Image 69
Page 68 Page 70
Contents LVT1290-001A J RX-5050B/RX-5052SMises en garde, précautions et indications diverses Table of Contents Parts Identification Front PanelDisplay Rear Panel Remote ControlConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Putting Batteries in the Remote ControlConnecting the speakers Connecting the Speakers and SubwooferAM antenna connections Turn the loop until you have the best receptionConnecting the subwoofer Connecting Audio/Video ComponentsAnalog Connections Placing speakersVideo component connections To audio output To composite video inputDVD player Connecting the Power Cord Plug the power cord into an AC outletDigital Connections Daily Operational Procedure Selecting the Source to Play Turning On the PowerBasic Operations When analog input is selected Always lights up Adjusting the VolumeSound Picture from a video component such as the VCR or DVDListening with headphones Selecting the Analog or Digital Input ModeBe sure to turn down the volume Press Subwoofer OUT ON/OFF to cancel the subwoofer outputTo select the analog input mode When Dolby Digital or DTS Surround is selectedChanging the Display Brightness Press DimmerBasic adjustment auto memory Using the Sleep TimerMuting the Sound Recording a sourceUsing Preset Tuning Tuning in to Stations ManuallyReceiving Radio Broadcasts Press FM/AM to select the band FM or AMSelecting the FM Reception Mode Press the 10 keys to select a preset channel numberWhile listening to an FM station, press FM Mode To tune in a preset stationPress Quick Speaker Setup Basic SettingsChannel number Press in Multi JOG Push SETBasic Setting Items Press SettingEx. When setting Auto Surround to Auto Surr on Setting the Speakers Setting the Speaker DistanceSetting the Bass Sounds Select the playback sounds channel Selecting the Main or Sub ChannelSetting the Digital Input Terminals Setting for Easy and Effective Surround OperationsSelect Auto Surr on to activate Auto Surround Select Vrtl SB on to activate Virtual Surround BackBasic Adjustment Items Adjusting SoundPress Adjust Ex. When adjusting the subwoofer level toAdjusting the Speaker Output Levels Adjusting the Equalization PatternsReproducing Theater Ambience Introducing the Surround Modes Using the Surround ModesDolby Digital*1 Dolby Digital 5.1CHWhat is Dual Mono? What is Linear PCM?DTS Digital Surround DTS 96/24Press Surround to activate the Surround mode Activating the Surround ModesSelect and play any source Reproducing the Sound Field Using the DSP ModesIntroducing the DSP Modes Digital Acoustic Processor DAP modesTo adjust the effect level except All Channel Stereo, see To cancel the DSP modeMulti-channel digital signals Activating the DSP ModesOperating Audio Components Operating JVC’s Audio/Video ComponentsSound control section Amplifier TunerCD changer Operating Video ComponentsDVD player Set TV/CATV selector to TVRelease STANDBY/ON TV/CATV If there are more than one code listed for your brand of TVTry to operate your Catv converter by pressing Try to operate your TV by pressingRelease STANDBY/ON VCR If there are more than one code listed for your brandRelease STANDBY/ON DVD Try to operate your VCR by pressingProblem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF AM tunerGeneral Page Page AUDIO/VIDEO Control Receiver LVT1290-002A C Mises en garde, précautions et indications diverses English RX-6030VAUDIO/VIDEO Control Receiver Remote Control Do not insert any metal object into the receiver Right Getting Started DVD player Connecting the Power Cord Basic Operations Basic Operations Turning On and Off Attenuating the Input Signal Muting the Sound Tuning in to Stations Manually Selecting the FM Reception Mode Basic Settings Basic Procedure Basic Settings Selecting the Main or Sub Channel Setting for Easy and Effective Surround Operations Adjusting Sound Adjusting Sound Using the Surround Modes Using the Surround Modes Activating the Surround Modes Using the DSP Modes Activating the DSP Modes Operating JVC’s Audio/Video Components Operating Video Components Operating Other Manufacturers’ Video Equipment STANDBY/ON VCR Subwoofer no Specifications Specifications EN, FR

RX-5052S, RX-5050B specifications

The JVC RX-5050B and RX-5052S are solid audio receivers that have appealed to home theater enthusiasts and casual listeners alike. Both models, known for their reliability and robust sound quality, present advanced features tailored for an immersive audio experience.

One of the standout features of the RX-5050B and RX-5052S is their high power output. These receivers are equipped with powerful amplification systems that permit them to deliver clear, dynamic sound across a wide range of frequencies. With a total harmonic distortion (THD) of less than 0.05%, these receivers ensure that the audio remains clean and true to the source material. This clarity allows listeners to appreciate subtle details in both music and movie soundtracks.

The RX-5050B and RX-5052S utilize JVC's proprietary technologies to enhance audio performance. This includes the Virtual Surround feature, which creates an expansive soundstage, making it feel as if sound is emanating from all around the listener. Furthermore, these models support a variety of audio formats, catering to diverse preferences from stereo sound to multi-channel audio setups.

Another key highlight of the RX-5050B and RX-5052S is their versatility with connectivity. Equipped with multiple inputs, including standard RCA connections, optical inputs, and coaxial inputs, these receivers can easily connect to a wide range of devices, such as DVD players, game consoles, and streaming devices. This versatility means that users can enjoy audio from various sources seamlessly.

In terms of build quality, both models feature a sturdy design that contributes to their longevity. The user interface is straightforward, allowing for easy navigation through settings and adjustments. The front panel includes a large volume knob, an AM/FM tuner, and dedicated buttons for essential functions, providing an intuitive experience for users of all ages.

Whether you're a movie buff looking to enhance your home theater setup or a music lover wanting to enjoy your favorite albums with pristine sound, the JVC RX-5050B and RX-5052S stand out as excellent choices. Their combination of power, sound processing technology, and ease of use make them reliable components in any audio setup. With the durability and performance offered by these receivers, users can expect a satisfying auditory experience for many years to come.
Top Page Image Contents