JVC LVT1140-004A manual Release STANDBY/ON TV/CATV, Try to operate your TV by pressing

Page 39

Operating Other Manufacturers’ Video Equipment

[Only for RX-6042S]

This remote control supplied for the receiver can transmit control signals for other manufacturers’ TVs, CATV converters, VCRs and DVD players.

English

When operating the other manufacturers’ components, refer also to the manuals supplied with them.

•After replacing batteries for the remote control, you need to set the manufactures’ codes again.

To change the transmittable signals for operating another manufacturer’s TV

1Set the TV/CATV selector to “TV.”

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

JVC

01*

Hitachi

10

Magnavox

02

Mitsubishi

03

Panasonic

04, 11

RCA

05

Samsung

12

Sanyo

13

Sharp

06

Sony

07

Toshiba

08

Zenith

09

 

 

* “01” is the initial setting.

5 Release STANDBY/ON TV/CATV.

Now you can perform the following operations on the TV:

STANDBY/ON TV/CATV: Turn on and off the TV.

TV/CATV CH +/–:Change the channels.

TV VOLUME +/–:Adjust the volume.

TV/VIDEO: Set the input mode (either TV or VIDEO).

After pressing TV SOUND, you can perform the following operations on the TV:

1 – 9, 0, 100+ (+10):

Select the channels.

The 10 (ENTER) button will function as the

ENTER button if your TV requires pressing

ENTER after selecting a channel number.

Notes:

•All the functions listed above may not be assigned to the buttons for some TVs.

•If you cannot change the channels of some TVs by pressing the 10 keys, press TV/CATV CH +/– for changing the channels.

6 Try to operate your TV by pressing

STANDBY/ON TV/CATV.

When your TV turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

To change the transmittable signals for operating a CATV converter

1Set the TV/CATV selector to “CATV.”

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

Echostar

01*

General Instrument

02, 03, 04, 05, 06, 07, 08, 09

Hamlin

16, 17, 18, 19

Pioneer

14, 15

RCA

20

Scientific Atlanta

10, 11

Sony

21

Zenith

12, 13

* “01” is the initial setting.

5 Release STANDBY/ON TV/CATV.

Now you can perform the following operations on the CATV converter:

STANDBY/ON TV/CATV:

Turn on and off the CATV converter.

TV/CATV CH +/–:Change the channels.

After pressing TV SOUND, you can perform the following operations on the CATV converter:

1 – 9, 0, 100+ (+10):

Select the channels.

The 10 (ENTER) button will function as the ENTER button if your CATV converter requires pressing ENTER after selecting a channel number.

6 Try to operate your CATV converter by pressing

STANDBY/ON TV/CATV.

When your CATV converter on or off, you have entered the correct code.

If there are more than one code listed for your brand of CATV converter, try each one until the correct one is entered.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

35

Page 38 Page 40
Image 39
Page 38 Page 40
Contents LVT1140-004A US RX-6042S RX-5042SPrecaución--Interruptor STANDBY/ON Precaución Precaución Ventilación Adecuada Table of Contents Front Panel Parts IdentificationDisplay Remote ControlRear Panel RX-6042SRX-5042S Putting Batteries in the Remote Control Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesTurn the loop until you have the best reception Connecting the Speakers and SubwooferConnecting the speakers AM antenna connectionsAnalog Connections Connecting Audio/Video ComponentsConnecting the subwoofer Placing speakersGreen Red BlueDVD player When you connect a DVD player with stereo output jacksDigital Connections Adjusting the Voltage SelectorConnecting the Power Cord Plug the power cord into an AC outletDaily Operational Procedure Selecting the Source to Play Turning On the PowerBasic Operations Sound Adjusting the VolumePress Subwoofer OUT ON/OFF to cancel the subwoofer output Selecting the Analog or Digital Input ModeListening with headphones Be sure to turn down the volumePress Dimmer When Dolby Digital or DTS Surround is selectedTo select the analog input mode Changing the Display BrightnessRecording a source Basic adjustment auto memoryReinforcing the Bass Muting the SoundSelect the band FM or AM Using Preset TuningReceiving Radio Broadcasts Press MemoryTo tune in a preset station Press the 10 keys to select a preset channel numberSelecting the FM Reception Mode While listening to an FM station, press FM ModePress in Multi JOG Push SET Basic SettingsPress Quick Speaker Setup Channel numberBasic Setting Items Press SettingEx. When setting Auto Surround to Auto Surr on Setting the Speakers Setting the Speaker DistanceSetting the Bass Sounds Select Auto Surr on to activate Auto Surround Setting for Easy and Effective Surround OperationsSelecting the Main or Sub Channel Select the playback sounds channelSelect Vrtl SB on to activate Virtual Surround Back Setting the Digital Input TerminalsSetting the Component Video Input This setting is only for RX-6042SEx. When adjusting the subwoofer level to Adjusting SoundBasic Adjustment Items Press AdjustAdjusting the Speaker Output Levels Adjusting the Equalization PatternsDolby Digital 5.1CH Using the Surround ModesReproducing Theater Ambience Introducing the Surround Modes Dolby Digital*1DTS 96/24 What is Linear PCM?What is Dual Mono? DTS Digital SurroundPress Surround to activate the Surround mode Activating the Surround ModesSelect and play any source excluding DVD Multi for RX-6042S Digital Acoustic Processor DAP modes Using the DSP ModesReproducing the Sound Field Introducing the DSP ModesActivating the DSP Modes To cancel the DSP modeMulti-channel digital signals To adjust the effect level except All Channel Stereo, seeAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Press the play 3 button on the CD playerAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connection One-Touch Video Play Connecting procedureAutomatic Selection of TV’s Input Mode Automatic Power On/Off StandbyOperating JVC’s Audio/Video Components Operating Audio ComponentsPress CD-DISC, then press Press CD, then press +10 Cassette deck Operating Video ComponentsCD recorder DVD playerTry to operate your Catv converter by pressing If there are more than one code listed for your brand of TVRelease STANDBY/ON TV/CATV Try to operate your TV by pressingTry to operate your VCR by pressing If there are more than one code listed for your brandRelease STANDBY/ON VCR Release STANDBY/ON DVDProblem Possible Cause Solution TroubleshootingModels Output/Input terminals Sources Functions Main differences between the modelsAudio VideoPrecaução para a ligação à tensão da rede CA Precaución para la línea de la red CA
Top Page Image Contents