JVC LVT1140-004A manual Release STANDBY/ON VCR, Release STANDBY/ON DVD

Page 40

English

Operating Other Manufacturers’ Video Equipment (Only for RX-6042S)

To change the transmittable signals for

To change the transmittable signals for

operating another manufacturer’s VCR

operating another manufacturer’s DVD player

1Press and hold STANDBY/ON VCR.

2Press VCR.

3Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

JVC

01*, 02, 03

Emerson

10, 22

Gold Star

11

Hitachi

04

Mitsubishi

12

NEC

21

Panasonic

07, 13

Philips

09

RCA

05, 06

Samsung

20

Sanyo

17, 18, 19

Sony

14, 15, 16

Zenith

08

* “01” is the initial setting.

4 Release STANDBY/ON VCR.

Now you can perform the following operations on the VCR:

STANDBY/ON

VCR: Turn on and off the VCR.

VCR CH +/–:

Change the TV channels on the

 

VCR.

After pressing VCR, you can perform the following operations on the VCR:

1Press and hold STANDBY/ON DVD.

2Press DVD.

3Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

JVC

01*

Panasonic

02

Philips

04

Pioneer

03

Sony

05

Toshiba

06

Yamaha

07

* “01” is the initial setting.

4 Release STANDBY/ON DVD.

Now you can perform the following operations on the DVD player:

STANDBY/ON DVD: Turn on and off the DVD player.

After pressing DVD or DVD MULTI, you can perform the following operations on the DVD player:

3: Start playing.

4: Return to the beginning of the current (or previous) chapter (or fast reverse for some models).

¢: Skip to the beginning of the next chapter (or fast forward for some models).

7: Stop playing.

8: Pause playing. To resume, press 3.

3:

Start playing.

REW:

Rewind the tape.

FF:Fast-forward the tape.

7:Stop playing or recording.

8:Pause playing. To resume, press 3.

REC PAUSE: Enter recording pause.

To start recording, press this button then 3.

5 Try to operate your VCR by pressing

STANDBY/ON VCR.

After pressing DVD (or DVD MULTI), these buttons can be used for the DVD menu operations.

Note:

For detailed menu operations, refer to

the instructions supplied with the discs or the DVD player.

2

46

MENU

7/P 8

ENTER

10

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

5 Try to operate your DVD player by pressing

STANDBY/ON DVD.

When your DVD player turns on or off, you have entered the correct code.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

36

Image 40
Contents RX-6042S RX-5042S LVT1140-004A USPrecaución--Interruptor STANDBY/ON Precaución Precaución Ventilación Adecuada Table of Contents Parts Identification Front PanelRemote Control DisplayRX-6042S Rear PanelRX-5042S Before Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Putting Batteries in the Remote ControlConnecting the Speakers and Subwoofer Connecting the speakersAM antenna connections Turn the loop until you have the best receptionConnecting Audio/Video Components Connecting the subwooferPlacing speakers Analog ConnectionsRed Blue GreenWhen you connect a DVD player with stereo output jacks DVD playerAdjusting the Voltage Selector Connecting the Power CordPlug the power cord into an AC outlet Digital ConnectionsTurning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations Adjusting the Volume SoundSelecting the Analog or Digital Input Mode Listening with headphonesBe sure to turn down the volume Press Subwoofer OUT ON/OFF to cancel the subwoofer outputWhen Dolby Digital or DTS Surround is selected To select the analog input modeChanging the Display Brightness Press DimmerBasic adjustment auto memory Reinforcing the BassMuting the Sound Recording a sourceUsing Preset Tuning Receiving Radio BroadcastsPress Memory Select the band FM or AMPress the 10 keys to select a preset channel number Selecting the FM Reception ModeWhile listening to an FM station, press FM Mode To tune in a preset stationBasic Settings Press Quick Speaker SetupChannel number Press in Multi JOG Push SETPress Setting Basic Setting ItemsEx. When setting Auto Surround to Auto Surr on Setting the Speaker Distance Setting the SpeakersSetting the Bass Sounds Setting for Easy and Effective Surround Operations Selecting the Main or Sub ChannelSelect the playback sounds channel Select Auto Surr on to activate Auto SurroundSetting the Digital Input Terminals Setting the Component Video InputThis setting is only for RX-6042S Select Vrtl SB on to activate Virtual Surround BackAdjusting Sound Basic Adjustment ItemsPress Adjust Ex. When adjusting the subwoofer level toAdjusting the Equalization Patterns Adjusting the Speaker Output LevelsUsing the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesDolby Digital*1 Dolby Digital 5.1CHWhat is Linear PCM? What is Dual Mono?DTS Digital Surround DTS 96/24Activating the Surround Modes Press Surround to activate the Surround modeSelect and play any source excluding DVD Multi for RX-6042S Using the DSP Modes Reproducing the Sound FieldIntroducing the DSP Modes Digital Acoustic Processor DAP modesTo cancel the DSP mode Multi-channel digital signalsTo adjust the effect level except All Channel Stereo, see Activating the DSP ModesCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverPress the play 3 button on the CD player Automatic Source SelectionConnections 1 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 2 Video Cable Connection Connecting procedure Automatic Selection of TV’s Input ModeAutomatic Power On/Off Standby One-Touch Video PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsPress CD-DISC, then press Press CD, then press +10 Operating Video Components CD recorderDVD player Cassette deckIf there are more than one code listed for your brand of TV Release STANDBY/ON TV/CATVTry to operate your TV by pressing Try to operate your Catv converter by pressingIf there are more than one code listed for your brand Release STANDBY/ON VCRRelease STANDBY/ON DVD Try to operate your VCR by pressingTroubleshooting Problem Possible Cause SolutionMain differences between the models AudioVideo Models Output/Input terminals Sources FunctionsPrecaución para la línea de la red CA Precaução para a ligação à tensão da rede CA