JVC RX-774PBK Using Preset Tuning, To store the preset stations, To erase a stored preset station

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 40 stations at random.

To store the preset stations

On the front panel only:

1.Tune in the station you want to preset (see page 27). If you want to store the FM reception mode for this station, select the FM reception mode you want. See page 29 for details.

TUNER/SEA MEMORY

2. Press TUNER/SEA MEMORY.

“CH-” appears and the channel number position starts flashing on the display for about 5 seconds.

English

Note:

You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure that they are activated for tuner, not for the CD and others. (See page 62.)

3.Turn MULTI JOG to select a channel number while the channel number position is flashing.

4.Press TUNER/SEA MEMORY again while the selected channel number is flashing on the display. The selected channel number stops flashing.

The station is assigned to the selected channel number.

5.Repeat steps 1 to 4 until you store all the stations you want.

MULTI JOG

TUNER/SEA MEMORY

On the front panel:

TUNER PRESET

From the remote control:

1.Press FM/AM.

Each time you press the button, the band alternates between FM and AM.

2.Press 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

FM/AM

Note:

When you use the 10 keys on the remote control, be sure that they are activated for tuner, not for the CD and others. (See page 62.)