JVC RM-SR774XU, LVT0014-001A, RX-774PBK manual Specifications, Amplifier

Page 74

English

Specifications

Amplifier

Output Power

At Stereo operation

100 watts per channel, min. RMS,

 

 

driven into 4 ohms, at 1 kHz with no

 

 

more than 0.7 % total harmonic

 

 

distortion. (IEC268-3/DIN)

 

 

50 watts per channel, min. RMS,

 

 

driven into 8 ohms, at 1 kHz with no

 

 

more than 0.7 % total harmonic

 

 

distortion. (IEC268-3/DIN)

 

At Surround operation

 

 

Front Channels

70 watts per channel, min. RMS,

 

 

driven into 4 ohms at 1 kHz with no

 

 

more than 0.8 % total harmonic

 

 

distortion.

 

Center channel

70 watts, min. RMS, driven into

 

 

4 ohms at 1 kHz, with no more than

 

 

0.8 % total harmonic distortion.

 

Rear channels

70 watts per channel, min. RMS,

 

 

driven into 4 ohms at 1kHz, with no

 

 

more than 0.8 % total harmonic

 

 

distortion.

Total Harmonic Distortion (8 ohms, 1 kHz)

0.02 %* at 50 watts output

 

 

(* Measured by JVC Audio Analysis

 

 

System)

Audio Input Sensitivity/Impedance (1 kHz)

PHONO (MM)

2.5 mV/47 k ohms

 

CD, TAPE/MD, TV SOUND/DBS, VCR, DVD

200 mV/47 k ohms

Audio Output Level

TAPE/MD, VCR

200 mV

Signal-to-Noise Ratio (’66 IHF/DIN)

PHONO

70 dB/66 dB

 

CD, TAPE/MD, TV SOUND/DBS, VCR, DVD

87 dB/67 dB

Frequency Response (8 ohms)

PHONO

20 Hz to 20 kHz (±1 dB)

 

CD, TAPE/MD, TV SOUND/DBS, VCR, DVD

20 Hz to 20 kHz (±1 dB)

RIAA Phono Equalization

±0.5 dB (20 Hz to 20 kHz)

Loudness Control (Volume Control at –30 dB)

+6 ±1 dB at 100 Hz

 

 

+4 ±1 dB at 10 kHz

S.E.A

Center Frequencies

100 Hz, 1 kHz, 10 kHz

 

Control Range

±10 dB ±2 dB

71

Page 73 Page 75
Image 74
Page 73 Page 75
Contents RX-774PBK Precaución English Español Português Table of Contents Using the DVD Multi Playback Mode 3 4 5 678 9 Parts IdentificationFront Panel ~ ! @ # $ % Refer to the pages in parentheses for details» Sleep button ¼ Audio button Remote ControlWhen using the remote control Easy Set Up & Operations RX-774PBKTurn on the power Select the source Easy Set Up & Operations For Reproducing DVD Multi playback with your DVD playerDisc Return AUDIO/TV Volume Channel VCR Catv General How to set the voltage selectorGetting Started LocationsFM Antenna Connections Connecting the FM and AM AntennasExtend the FM wire antenna horizontally AM Antenna ConnectionsGetting Started Connecting the front speakersConnecting the Speakers Connecting the rear and center speakers Connecting the subwoofer speakerAbout the speaker impedance Case 1 When you connect only one set of front speakersCase 2 When you connect two sets of front speakers Audio Components Video Components Connecting Audio/Video ComponentsAudio component connections Video component connections TV connection as the monitorWhen you connect the DVD player with stereo output jacks DVD player connectionTV as the sound source or DBS tuner connection To audio output DBS tunerVCR connection InputPress Power to set it in the Ñoff position Connecting the Power CordTo shut off the power completely Putting Batteries in the Remote ControlBasic Operations From the remote controlTurning the Power On and Off Standby On the front panelBasic Operations Adjusting the VolumeTo increase the volume, turn Master Volume Press one of the source selecting buttons directlyOn the front panel only From the remote control onlyListening only with headphones Listening at Low Volume Loudness Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NameTo cancel the Sleep Timer Using the Sleep TimerWhen the shut-off time comes Setting Center and Rear Speakers for DSP ModesDelay Time Setting Basic SettingsRear Speaker Setting YESTo cancel the One Touch Operation function To store the sound settingsTo recall the sound settings One Touch OperationReceiving Radio Broadcasts Setting the AM Tuner Interval SpacingTuning in Stations Manually To select the 10 kHz intervalTo erase a stored preset station Using Preset TuningTo store the preset stations To tune in a preset stationAuto Selecting the FM Reception ModeReceiving Radio Broadcasts MonoPress Tuner PRESET, while a character you want is flashing Assigning Names to Preset StationsTune in a preset station. See page 28 for details Character is flashing after you have assigned a nameTo cancel the SEA mode Using the SEA ModesSelecting Your Favorite SEA Mode To recall your own SEA adjustment Creating Your Own SEA ModeYour adjustment is stored into SEA Usermode To erase a stored adjustmentOn the DAP mode Using the DSP ModesOn 3D-PHONIC mode On Surround mode3D Drama Using the 3D-PHONIC Modes3D Action 3D TheaterKeys are activated for sound adjustments Using the DSP ModesTo cancel the 3D-PHONIC mode Press Sound ControlUsing the DAP Modes To cancel the DAP mode Press Rearl +/- to adjust the rear speaker output level Each time you press the button, the effect level changesTheater Preparing for Surround ModesPRO Logic OFFAdjusted level are also shown on the equalizer display If necessary, adjust the speaker output level as followsCenter tone adjustment affects the mid-frequency For Dolby Pro Logic Until Center Tone appears on the display Press Surround Mode repeatedly until OFF appears Using Surround ModesTo cancel the Surround mode Turn Multi JOG until Theater appears onActivating the DVD Multi Playback Using the DVD Multi Playback ModeSpeaker Arrangements for DVD Multi Playback Refer to the manual supplied with the DVD playerUsing the DVD Multi Playback Mode Press DVD Multi so that DVD Multi appears on the display Keys are activated for adjusting the soundPress Cntr +/- to adjust the center speaker output level Selecting the Source to Play Also see Using the On-Screen MenusWhen you select OSD, see Selecting the Different Sources for Picture and SoundSound Control menu appears on the TV Adjusting the Front Speaker Output Balance Also seeListening at Low Volume Loudness Also see Sound Control menu appearsUsing the On-Screen Menus Selecting Your Favorite SEA Mode Also seeSEA Adjust menu appears Creating Your Own SEA Mode Also seeSetting the Center Speaker Size Also see Press SET to store the setting into the SEA UsermodeOperating the Tuner Setting the Rear Speaker Also seeSetting the Delay Time Also see Preset Memory menu appears Storing the Preset Stations Also seeAssigning Names to the Preset Stations Also see Character entry screen appearsTuner Control menu appears again Automatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemPlugs not supplied with this receiver Disc Search Only for CD PlayerOperations Showing the Disc Information on the TV ScreenSearch a disc by its performer Text Compu Link Remote Control SystemSearching a Disc Only for the CD player Search a disc by its disc titlePress on Screen Control %/ Þ to move to GENRE, then press Going back to the Disc Title Search screen Press ExitSearch a disc by its genre SETGoing back to the User File screen Press Exit Using your own User FilesUser File screen appears on the TV Title Input Performer screen appears on the TV Entering the Disc InformationFor the CD Player with the disc memory function To move to Shift , then press SETEnter the song title, referring to steps 3 and 4 on For the MD recorderEnter the title, referring to steps 3 and 4 on Play Tuning UP/TUNING DownOperating JVC’s Audio/Video Components StopTurntable Operating JVC’s Audio/Video ComponentsCD player-changer Cassette deckREW TV Volume +VCR TV/CATV/DBSTurns on and off TV Sets the input mode either TVOperating Other Manufactures’ Components Or Video10, 0, 100++10 Operating Other Manufactures’ Components Try to operate your VCR by pressing VCRManufacturers’ codes for TV Manufacturers’ codes for VCR Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierVideo Important for mains AC line

RM-SR774XU, RX-774PBK, LVT0014-001A specifications

JVC has long been recognized for its innovative audio-video products, and the JVC LVT0014-001A, RX-774PBK receiver, and RM-SR774XU remote control are prime examples of this commitment to quality and performance in home entertainment systems.

The JVC LVT0014-001A is a versatile speaker system component designed to enhance the auditory experience of users. With a compact design, it delivers powerful sound quality, ensuring that every note and beat is represented faithfully. One of its key features is its audio output capability, which is optimized to support a variety of formats, ranging from traditional stereo sound to more complex surround sound systems. This compatibility makes the LVT0014-001A an excellent choice for audiophiles and casual listeners alike.

The RX-774PBK, JVC's advanced receiver, brings together a wide array of technologies that elevate its functionality. It supports high-definition audio formats and features built-in Bluetooth connectivity, allowing users to stream music directly from their smartphones or tablets without the hassle of wires. The receiver is equipped with multiple HDMI inputs, making it easy to connect a variety of devices such as gaming consoles, Blu-ray players, and streaming devices. Furthermore, the RX-774PBK includes advanced audio technologies like Dolby Atmos and DTS:X, giving users a spatial audio experience that immerses them in their favorite movies and music.

Complementing these devices is the RM-SR774XU remote control, designed for ease of use and convenience. This remote features an intuitive layout with clearly labeled buttons, simplifying the navigation between different inputs and settings. Its ergonomic design ensures comfortable handling, while the infrared technology guarantees reliable connectivity with the RX-774PBK. Users can easily switch between different audio modes, adjust volume levels, and manage connected devices, all at the touch of a button.

In summary, the combination of the JVC LVT0014-001A, RX-774PBK, and RM-SR774XU creates a robust home entertainment system that prioritizes sound quality, connectivity, and user-friendliness. Whether for casual listening or an immersive movie experience, these products are designed to meet the evolving needs of home audio enthusiasts, showcasing JVC’s commitment to quality and innovation in the field of home entertainment.
Top Page Image Contents