JVC RM-SR774XU, LVT0014-001A, RX-774PBK Operations, Showing the Disc Information on the TV Screen

OPERATIONS

To use this remote control system, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 15), and set the TV’s input mode to the proper position to which the receiver is connected. Make sure you have connected the CD player or MD recorder equipped with the TEXT COMPU LINK remote control system. If not, you cannot use the following functions.

Showing the Disc Information on the TV Screen

1.Press any button of ON SCREEN CONTROL %/ Þ/ @ / # once. The MAIN MENU appears on the TV.

2.Press ON SCREEN CONTROL %/ Þ to move to “SOURCE.”

3.Press ON SCREEN CONTROL @ / #to select “CD” or “MD.”

4.Press ON SCREEN CONTROL %/ Þ to move to “VISUAL.”

5.Press ON SCREEN CONTROL @ / #to select “OSD,” then press EXIT. The Disc Information screen appears on the TV.

￿

1Source name: CD or MD

2Select or , then press SET to change the disc.

3 Track numbers and track titles.

•The current playing (selected) track is indicated in yellow.

•When you move to a track number, you can change the track information by pressing @/ #. Each time you press the button, track information alternates

between its track title and its performer. (You can also start playing the track by pressing SET.)

4Select this (move in front), then press SET to go to the DISC SEARCH screen

(see page 57).

5Select this (move in front), then press SET to go to the USER FILE screen (see page 59).

6Select this (move in front), then press SET to go to the TITLE INPUT screen (see page 60).

7Disc information such as the disc title, performer, and music genre.

When this is selected ( in front) , you can change the disc information by pressing

@/ #. Each time you press the button, disc information (see the note) changes.

8 Select or , then press SET to change the track.

9 Usable buttons and their functions for the current selection.

Indication here will be changed what is currently selected ( in front) on the screen.

6.When you finish, press EXIT repeatedly until the MAIN MENU appears on the TV.

To exit from the MAIN MENU:

1)Press ON SCREEN CONTROL %/ Þ to move to “VISUAL.”

2)Press ON SCREEN CONTROL @ / # to select any one other than “OSD,” then press EXIT.

English

Notes:

•The on-screen display will not appear about one minute after the power is turned on.

•The on-screen display will disappear in the following case:

–if no operation is done for about 10 minutes.

–if you do any operation other than explained in this section.

•To control the MD recorder using the TEXT COMPU LINK remote control system, you have to change the source name shown on the display from “TAPE” to “MD.” (See page 23.)

•The number of characters to show the disc information such as the disc title or track title is limited to 32. So if the disc title, for example, is longer than 32 characters, only the first 32 characters are shown.

•Some special characters such as accented letters cannot be displayed correctly.

Note on 7:

The following information will appear on the display:

•Disc title

•Performer

•Genre

•Song writer

•Composer

•Arranger

•Message

Only recorded information will be shown. If there is no data, “NO DATA” will appear.

Note on 9:

For example, the SET button will be used to start play (PLAY), to go to the next screen (ENTER), and to determine the selection (ENTER).

56