JVC RX-774PBK, LVT0014-001A manual Using Surround Modes, Turn Multi JOG until Theater appears on

Using the DSP Modes

English

Using Surround Modes

Once you have finished adjustments for Dolby Pro Logic and Theater Surround, you can use the same adjustments every time you want to use these modes.

Notes:

• When you select “DVD MULTI”

as the source to play, you

On the front panel:

1.For Dolby Pro Logic:

Press DOLBY SURROUND so that the lamp on the button lights up and “PRO LOGIC” appears on the display.

The PRO LOGIC indicator also lights up.

Each time you press the button, the Dolby Pro Logic mode turns on and off.

For Theater Surround:

1)Press DSP MODE.

The current DSP mode appears on the display.

DOLBY SURROUND

DSP MODE

cannot select the Surround

modes.

• The Surround mode is not

used with the other DSP

modes such as the DAP mode

and 3D-PHONIC mode. When

the Surround mode is turned

on, the other DSP mode, if

used, will be turned off.

2) Turn MULTI JOG until “THEATER” appears on	MULTI JOG
the display, while the indication of the previous
step is still on the display.
The PRO LOGIC, DSP and THEATER indicators
also light up on the display.

2. Select and play a sound source which was processed with Dolby Surround and

is labeled with DOLBY SURROUND mark.

To cancel the Surround mode

For Dolby Pro Logic: Press DOLBY SURROUND again so that “SURROUND OFF” appears on the display.

For Theater Surround: Press DSP MODE, then turn MULTI JOG until “DSP OFF” appears on the display.

From the remote control:

1. Press SURROUND MODE repeatedly until “PRO			SOUND
			CONTROL
LOGIC” or “THEATER” appears on the display.
When “PRO LOGIC” is selected, the PRO LOGIC
indicator also lights up on the display.
When “THEATER” is selected, the PRO LOGIC, DSP
and THEATER indicators also light up on the display.
2. Select and play a sound source which was processed
with Dolby Surround and is labeled with
	DOLBY SURROUND	mark.

To cancel the surround mode

Press SURROUND MODE repeatedly until “OFF” appears.

43