Smooth Fitness SB4 user manual Install Handlebar Post Cover, Install Handlebars, Install Computer

- 14 -

SB4 Recumbent Bike

ASSEMBLY INSTRUCTIONS

Step 13 - Install Handlebar Post Cover

Attach the Handlebar Post Cover Left (32) and Right

(33)to the Handlebar Post ( 2 ) using:

2 – M5 Round Philips Head Machine Screw ( 129 )

Step 14 - Install Handlebars

Attach the Left Handlebar ( 4 ) and Right Handlebar (

5 ) to Upright Tube ( 2 ) using:

4 – M8 Washer ( 157 )

4 – M8 Spring Washers ( 118 )

4 – M8 x 15MM Round Allen Head Bolt ( 120)

Step 15 - Install Computer

Connect the Upper Computer Wire ( 90 ), the Upper Hand Pulse wire (92) to the 2 wires that are on the back of the Computer (40). Attach the Computer

(40) to the Upright Tube ( 2 ) using:

4 – M5 x 10MM Screws (125) ( On back of Computer)

Note: Be careful not to damage or disconnect the wires when attaching the computer

Step 16 – Plug the AC Adaptor

Plug the AC adaptor lead (164) into the socket at the rear end of your

Recumbent Bike as shown.

Plug the 6V 1000mA A.C. Adaptor into a suitable mains supply.

www.smoothfitness.co.uk