JVC RX-8012VSL manual Digital Connections, Digital input terminals, Digital output terminal

Page 11

Digital Connections

This receiver is equipped with four DIGITAL IN terminals — one digital coaxial terminal and three digital optical terminals, and one DIGITAL OUT terminal.

IMPORTANT:

•When connecting the DVD player, digital TV broadcast tuner or DBS tuner using the digital terminals, you also need to connect it to the video terminal on the rear. Without connecting it to the video terminal, you can view no playback picture.

•After connecting the components using the DIGITAL IN terminals, set the following correctly if necessary.

–Set the digital input (DIGITAL IN) terminal setting correctly. For details, see “Digital Input (DIGITAL IN) Terminal Setting” on page 19.

–Select the digital input mode correctly. For details, see “Selecting the Analog or Digital Input Mode” on page 20.

Notes:

•When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components.

–DIGITAL 1 (coaxial): For DVD player

–DIGITAL 2 (optical): For CD player

–DIGITAL 3 (optical): For digital TV broadcast tuner

–DIGITAL 4 (optical): For CD recorder

•When you want to operate the CD player, CD recorder, or MD recorder using the COMPU LINK remote control system, connect the target component also as described in “Analog Connections” (see pages 5 and 6).

•When you want to operate the DVD player using the AV COMPU LINK remote control system, connect the DVD player also as described in “Analog Connections” (see page 7).

English

Digital input terminals

You can connect any digital equipment as follow.

Digital TV

 

 

 

 

 

 

 

 

DBS tuner

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DBS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD player

CD player

DVD

Digital output terminal

 

 

CD recorder

 

 

MD recorder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital optical cable (not supplied) between digital optical terminals

 

 

CD recorder

 

 

MD recorder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital coaxial cable (not supplied) between digital coaxial terminals

Digital optical cable (not supplied) between digital optical terminals

When the digital recording equipment such as an MD recorder and CD recorder has a digital optical input terminal, connecting it to the DIGITAL OUT terminal enables you to perform digital-to- digital recording.

PCM/DOLBY DIGITAL /DTS

DIGITAL OUT

When the component has a digital coaxial output terminal, connect it to the DIGITAL 1 (DVD) terminal, using the digital coaxial cable (not supplied).

When the component has a digital optical output terminal, connect it to the DIGITAL 2 (CD), DIGITAL 3 (TV) or DIGITAL 4 (CDR) terminal, using the digital optical cable (not supplied).

Before connecting a digital optical cable, unplug the protective plug.

Note:

The digital signal format output through the DIGITAL OUT terminal is the same as that of the input signal. This means that when the DTS Digital Surround signals are input, the DTS Digital Surround signals are output.

DIGITAL IN

DIGITAL 1 (DVD)

DIGITAL 2 (CD)

DIGITAL 3 (TV)

DIGITAL 4 (CDR)

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents RX-8012VSL Precaución English Español Português Table of Contents USB AUDIO, FM/AM Remote Control Front PanelParts Identification 3 4 5 6 7 Pqw e r tSetting the Voltage Selector Switch Before InstallationChecking the Supplied Accessories Connecting the FM and AM AntennasAM Antenna Connections Connecting the SpeakersBasic connecting procedure Connecting the front speakersAbout the speaker impedance Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVCRs To audio outputCassette deck or MD recorder Video component connectionsDVD player When connecting the TV to the Audio jacks TV SoundConnecting and disconnecting the equipment frequently TV and/or DBS tuner Video cameraDigital output terminal Digital ConnectionsDigital input terminals USB cable Change the PC audio settingUSB Connection Lamp on the USB Audio button lights upReplace the cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletSelecting the Source to Play Turning the Power On and Off StandbyBefore using the remote control Basic OperationsSelecting different sources for picture and sound Adjusting the VolumeSignal and speaker indicators on the display Midnight 1 Midnight Normal Listening at Night Midnight ModeSelecting the Front Speakers Muting the SoundSelecting the Line Direct Function Activating the Subwoofer Sound Attenuating the Input SignalReinforcing the Bass Recording a Source Adjusting the Equalization PatternsUsing the Sleep Timer Changing the Source Name Basic SettingsAdjusting the Front Speaker Output Balance Selecting the Video Input TerminalSetting the Speakers for a Surround Field Setting the Subwoofer InformationAdjusting the Subwoofer Output Level To select the delay time of the rear CTR Delay Center Delay Appears on the displayTo select the delay time Rear Delay appears on DisplayDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input Mode To turn on the One Touch Operation Basic Setting and Adjustment Auto MemoryTo store the volume level Showing the Text Information on DisplayReceiving Radio Broadcasts Tuning in Stations Manually Using Preset TuningSelecting the FM Reception Mode DSP modes Creating a Surround Field in Your RoomSurround modes 3D-PHONIC modes DVD Multi Playback ModeHeadphone DSP mode Reproducing the Sound FieldAvailable DSP modes Available DSP Modes According to the Speaker ArrangementAdjusting the Surround Modes Adjust the speaker output levels Adjust the speaker output levelsAdjust the center tone Adjusting the DAP ModesDAP mode you want to adjust Adjust the room size sense of spaciousnessAdjust the liveness Press DSP Mode repeatedly untilAdjusting the Surround Modes with DAP Modes Liveness 1 Liveness 2 Liveness Press Liveness to adjustLiveness Adjust the speaker output levels Press Room Size to adjustOnly Adjusting the 5 CH/4 CH Stereo ModePress DSP Mode repeatedly until DSP Mode Press DSP Mode repeatedly until ModeAdjusting the 3D-PHONIC Modes Memo ----------English Press CTR Tone to selectCenter tone level you want Activating the DVD Multi Playback Mode Using the DVD Multi Playback ModePress Menu Using the On-Screen MenusThen press 2 To Level ADJUST, then pressPress 5 / to move to Sound CONTROL, then press 2 Press 5 / to move to Digital EQPress 5/ to move to Sound CONTROL, then press 2 Press 5/ to move to Effect ADJUST, then press 2Press 5/ to move To Level ADJUST, then press 2 Select DVD Multi as the playing sourcePress 5/ to move to Tuner CONTROL, then press 2 Press 5/ to move To Preset MEMORY, then press 2Select FM or AM as the playing source Setting 2 menu Press 5 / to move To Setting Then press 2To the item you want to set or adjust, then press 2 Setting the Basic Setting ItemsPress the play 3 button on the CD player Compu Link Remote Control SystemSame time Disc Search Only for CD Player Text Compu Link Remote Control SystemCD player MD recorder Displaying the Disc Information on the TV screenPress Exit Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen To exit from the Disc information screenPress SET again Press Text Display while CD is selected as the sourcePress 5 / to move to SEARCH, then Press SET Press 5 / to move To Performer Then press SETSearch for a disc by its genre Press 5/ to move to GENRE, then Press SETPress 5/ to move to Title Input Then press SET Entering the Disc InformationPress 5/ to move Press 5/ / 2/ 3toPress Text Display while MD is selected as the source Move to Disc Michael in this Example, then press SETVCR AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionOne-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlaySound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCassette deck CD changerTurntable CD recorderTV/VIDEO Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks DVD playerTry to operate your TV by pressing TV If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Release TVTry to operate your VCR by pressing VCR Release CATV/DBSRelease VCR Release Audio Problem Possible Cause Solution TroubleshootingOn the front Video SpecificationsAmplifier AudioGeneral Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF AM tunerPrecaución para la línea de la red CA Voltage SelectorPrecaução para a ligação à tensão da rede CA

RX-8012VSL specifications

The JVC RX-8012VSL is a versatile and robust audio/video receiver that epitomizes the merging of performance and functionality in home entertainment systems. This model is notable for its exceptional sound quality, making it a popular choice for audiophiles and casual listeners alike.

One of the main features that set the RX-8012VSL apart is its robust 5.1-channel audio setup. This configuration delivers a rich surround sound experience that immerses listeners in their favorite movies and music. With a power output of 100 watts per channel, this receiver can easily fill large rooms with dynamic audio.

The RX-8012VSL supports a variety of audio formats, including Dolby Digital and DTS, which enhance the listening experience with clear dialogue and a profound sense of depth. The integration of JVC's proprietary 3D Surround technology further elevates sound reproduction, creating an enveloping audio environment that enhances home theater experiences.

This receiver also boasts an array of inputs and outputs designed for modern connectivity needs. With multiple HDMI inputs, users can easily connect various devices such as Blu-ray players, gaming consoles, and streaming devices. HDMI pass-through features allow for seamless switching between sources while maintaining high-definition video quality, an essential characteristic for any contemporary home theater setup.

The RX-8012VSL supports 4K video pass-through, ensuring compatibility with the latest high-definition content. Additionally, the receiver includes a sweeping array of audio adjustments, allowing users to fine-tune settings according to their specific needs or room acoustics, which is especially useful in delivering optimized sound performance.

In terms of design, the RX-8012VSL embraces a sleek and modern aesthetic, featuring an easy-to-navigate front panel with a clear LCD display. The intuitive user interface and remote control enhance usability, allowing users to switch settings effortlessly.

Another noteworthy feature is the built-in radio tuner, which allows access to FM and AM stations, adding more diversity to the entertainment options. With all its features and capabilities, the JVC RX-8012VSL embodies a perfect blend of aesthetic appeal, user-friendly operation, and audio excellence, making it an ideal choice for any home theater enthusiast.
Top Page Image Contents