JVC RX-8012VSL manual Troubleshooting, Problem Possible Cause Solution

Page 58

English

Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.

 

PROBLEM

 

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

 

 

 

The display does not light up.

 

The power cord is not plugged in.

Plug the power cord into an AC outlet. (See

 

 

 

 

 

page 10.)

 

 

 

 

 

 

 

 

No sound from speakers.

 

Speaker signal cables are not connected.

Check speaker wiring and reconnect if

 

 

 

 

 

necessary. (See pages 4 and 5.)

 

 

 

 

 

 

 

 

 

 

The SPEAKERS ON/OFF 1 and

Press SPEAKERS ON/OFF 1 and

 

 

 

 

SPEAKERS ON/OFF 2 buttons are not

SPEAKERS ON/OFF 2 correctly. (See page

 

 

 

 

set correctly.

13.)

 

 

 

 

 

 

 

 

 

 

An incorrect source is selected.

Select the correct source.

 

 

 

 

 

 

 

 

 

 

Muting is activated.

Press MUTING to cancel the mute. (See

 

 

 

 

 

page 13.)

 

 

 

 

 

 

 

 

 

 

An incorrect input mode (analog or

Select the correct input mode (analog or

 

 

 

 

digital) is selected.

digital). (See page 20.)

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check connections.

 

 

 

 

 

For analog connections, see page 5.

 

 

 

 

 

For digital connections, see page 8.

 

 

 

 

 

For USB connection, see page 9.

 

 

 

 

 

 

 

 

Sound from one speaker only.

 

Speaker signal cables are not connected

Check speaker wiring and reconnect if

 

 

 

 

properly.

necessary. (See pages 4 and 5.)

 

 

 

 

 

 

 

 

 

 

The balance is set to one extreme.

Adjust the balance properly. (See page 16).

 

 

 

 

 

 

 

 

No sound from PC connected with a USB

 

An electrical shock is applied to the

Turn off and on the receiver once, then

 

 

cable.

 

receiver, PC, or USB cable.

restart the application installed in the PC.

 

 

 

 

 

 

 

 

 

 

USB device is not selected on the

Select “USB Audio Device [1]” for

 

 

 

 

computer.

“Playback” of “Audio” (see page 9).

 

 

 

 

 

Refer to the manuals supplied with your PC.

 

 

 

 

 

 

 

 

 

 

“Mute” is selected on the PC.

Check if the volume is set at low level.

 

 

 

 

 

Refer to the manuals supplied with your PC.

 

 

 

 

 

 

 

 

Noise while reproducing PC sound

 

Strong electromagnetic wave is emitted

Move the PC away from the device such as

 

 

connected with a USB cable.

 

from such as television.

TV emitting strong electromagnetic wave.

 

 

 

 

 

 

 

 

Sound from PC connected with a USB

 

PC is subjected to excessive load due to

Close the applications you do not use.

 

 

cable is intermittent.

 

using other applications.

 

 

 

 

 

 

 

 

 

Continuous hiss or buzzing during FM

 

Incoming signal is too weak.

Connect an outdoor FM antenna or contact

 

 

reception.

 

 

your dealer. (See page 3.)

 

 

 

 

 

 

 

 

 

 

The station is too far away.

Select a new station.

 

 

 

 

 

 

 

 

 

 

An incorrect antenna is used.

Check with your dealer to be sure you have

 

 

 

 

 

the correct antenna.

 

 

 

 

 

 

 

 

 

 

Antennas are not connected properly.

Check connections. (See page 3.)

 

 

 

 

 

 

 

 

Occasional cracking noise during FM

 

Ignition noise from automobiles.

Move the antenna farther from automobile

 

 

reception.

 

 

traffic.

 

 

 

 

 

 

 

 

Noise is heard.

 

An earth (H) cable is not connected to the

Connect the cable to the AM (H) terminal

 

 

 

 

AM (H) terminal on the rear panel.

on the rear panel.

 

 

 

 

 

 

 

 

No sound effect such as DSP mode and

 

The line direct function is turned on.

Turn off the line direct function. (See page

 

 

digital equalization.

 

 

14.)

 

 

 

 

 

 

 

 

Howling during record playing.

 

Your turntable is too close to the

Move the speakers away from the turntable.

 

 

 

 

speakers.

 

 

 

 

 

 

 

 

55

Page 57 Page 59
Image 58
Page 57 Page 59
Contents RX-8012VSL Precaución English Español Português Table of Contents 3 4 5 6 7 Pqw e r t Remote Control Front PanelParts Identification USB AUDIO, FM/AMConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Setting the Voltage Selector SwitchConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers About the speaker impedanceVideo component connections To audio outputCassette deck or MD recorder VCRsTV and/or DBS tuner Video camera When connecting the TV to the Audio jacks TV SoundConnecting and disconnecting the equipment frequently DVD playerDigital input terminals Digital ConnectionsDigital output terminal Lamp on the USB Audio button lights up Change the PC audio settingUSB Connection USB cablePlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Replace the coverBasic Operations Turning the Power On and Off StandbyBefore using the remote control Selecting the Source to PlaySignal and speaker indicators on the display Adjusting the VolumeSelecting different sources for picture and sound Muting the Sound Listening at Night Midnight ModeSelecting the Front Speakers Midnight 1 Midnight NormalReinforcing the Bass Activating the Subwoofer Sound Attenuating the Input SignalSelecting the Line Direct Function Using the Sleep Timer Adjusting the Equalization PatternsRecording a Source Selecting the Video Input Terminal Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NameAdjusting the Subwoofer Output Level Setting the Subwoofer InformationSetting the Speakers for a Surround Field Rear Delay appears on Display CTR Delay Center Delay Appears on the displayTo select the delay time To select the delay time of the rearDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input Mode Showing the Text Information on Display Basic Setting and Adjustment Auto MemoryTo store the volume level To turn on the One Touch OperationTuning in Stations Manually Using Preset Tuning Receiving Radio BroadcastsSelecting the FM Reception Mode Surround modes Creating a Surround Field in Your RoomDSP modes Reproducing the Sound Field DVD Multi Playback ModeHeadphone DSP mode 3D-PHONIC modesAvailable DSP Modes According to the Speaker Arrangement Available DSP modesAdjusting the Surround Modes Adjusting the DAP Modes Adjust the speaker output levelsAdjust the center tone Adjust the speaker output levelsPress DSP Mode repeatedly until Adjust the room size sense of spaciousnessAdjust the liveness DAP mode you want to adjustAdjusting the Surround Modes with DAP Modes Press Room Size to adjust Press Liveness to adjustLiveness Adjust the speaker output levels Liveness 1 Liveness 2 LivenessPress DSP Mode repeatedly until Mode Adjusting the 5 CH/4 CH Stereo ModePress DSP Mode repeatedly until DSP Mode OnlyAdjusting the 3D-PHONIC Modes Center tone level you want Press CTR Tone to selectMemo ----------English Using the DVD Multi Playback Mode Activating the DVD Multi Playback ModeUsing the On-Screen Menus Press MenuPress 5 / to move to Digital EQ To Level ADJUST, then pressPress 5 / to move to Sound CONTROL, then press 2 Then press 2Select DVD Multi as the playing source Press 5/ to move to Effect ADJUST, then press 2Press 5/ to move To Level ADJUST, then press 2 Press 5/ to move to Sound CONTROL, then press 2Select FM or AM as the playing source Press 5/ to move To Preset MEMORY, then press 2Press 5/ to move to Tuner CONTROL, then press 2 Setting the Basic Setting Items Press 5 / to move To Setting Then press 2To the item you want to set or adjust, then press 2 Setting 2 menuSame time Compu Link Remote Control SystemPress the play 3 button on the CD player Displaying the Disc Information on the TV screen Text Compu Link Remote Control SystemCD player MD recorder Disc Search Only for CD PlayerTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen Press ExitPress 5 / to move To Performer Then press SET Press Text Display while CD is selected as the sourcePress 5 / to move to SEARCH, then Press SET Press SET againEntering the Disc Information Press 5/ to move to GENRE, then Press SETPress 5/ to move to Title Input Then press SET Search for a disc by its genreMove to Disc Michael in this Example, then press SET Press 5/ / 2/ 3toPress Text Display while MD is selected as the source Press 5/ to moveConnections 2 Video Cable Connection AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection VCROne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierCD recorder CD changerTurntable Cassette deckDVD player Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks TV/VIDEORelease TV If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressing TVRelease VCR Release CATV/DBSTry to operate your VCR by pressing VCR Release Audio Troubleshooting Problem Possible Cause SolutionOn the front Audio SpecificationsAmplifier VideoAM tuner Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF GeneralPrecaução para a ligação à tensão da rede CA Voltage SelectorPrecaución para la línea de la red CA

RX-8012VSL specifications

The JVC RX-8012VSL is a versatile and robust audio/video receiver that epitomizes the merging of performance and functionality in home entertainment systems. This model is notable for its exceptional sound quality, making it a popular choice for audiophiles and casual listeners alike.

One of the main features that set the RX-8012VSL apart is its robust 5.1-channel audio setup. This configuration delivers a rich surround sound experience that immerses listeners in their favorite movies and music. With a power output of 100 watts per channel, this receiver can easily fill large rooms with dynamic audio.

The RX-8012VSL supports a variety of audio formats, including Dolby Digital and DTS, which enhance the listening experience with clear dialogue and a profound sense of depth. The integration of JVC's proprietary 3D Surround technology further elevates sound reproduction, creating an enveloping audio environment that enhances home theater experiences.

This receiver also boasts an array of inputs and outputs designed for modern connectivity needs. With multiple HDMI inputs, users can easily connect various devices such as Blu-ray players, gaming consoles, and streaming devices. HDMI pass-through features allow for seamless switching between sources while maintaining high-definition video quality, an essential characteristic for any contemporary home theater setup.

The RX-8012VSL supports 4K video pass-through, ensuring compatibility with the latest high-definition content. Additionally, the receiver includes a sweeping array of audio adjustments, allowing users to fine-tune settings according to their specific needs or room acoustics, which is especially useful in delivering optimized sound performance.

In terms of design, the RX-8012VSL embraces a sleek and modern aesthetic, featuring an easy-to-navigate front panel with a clear LCD display. The intuitive user interface and remote control enhance usability, allowing users to switch settings effortlessly.

Another noteworthy feature is the built-in radio tuner, which allows access to FM and AM stations, adding more diversity to the entertainment options. With all its features and capabilities, the JVC RX-8012VSL embodies a perfect blend of aesthetic appeal, user-friendly operation, and audio excellence, making it an ideal choice for any home theater enthusiast.
Top Page Image Contents