JVC RX-8012VSL Adjust the speaker output levels, Adjust the center tone, Adjusting the DAP Modes

Page 31

2. Press SURROUND ON/OFF to SURROUND ON/OFF

activate an appropriate Surround mode — PRO LOGIC, DOLBY

DIGITAL or DTS SURROUND.

The SURROUND ON/OFF lamp on the front panel button lights up.

•Each time you press the button, the Surround mode turns on and off alternately.

•When “PRO LOGIC” is selected, the PRO LOGIC indicator lights up on the display.

On the front panel:

1. Press DSP MODE repeatedly until DSP MODE the DAP mode you want to adjust

—THEATER 1, THEATER 2, HALL 1, HALL 2, LIVE CLUB, DANCE CLUB, or PAVILION — appears on the display.

The DSP MODE lamp on the front panel button lights up, and the DSP indicator also lights up on the display.

English

3. Adjust the speaker output levels.

1) Press LEVEL ADJUST repeatedly

•When you have set “REAR SPK” to “NONE,” the 3D- PHONIC indicator also lights up.

until one of the following indications

appears on the display.

“CENTER”:

To adjust the center speaker level.

“REAR L”:

To adjust the left rear speaker level.

“REAR R”:

To adjust the right rear speaker level.

2) Press CONTROL UP 5/DOWN °to

adjust the selected speaker output level

(from –10 dB to +10 dB).

3) Repeat 1) and 2) to adjust the other

speaker output levels.

TAL

LEVEL

Q

ADJUST

CONTROL

DOWN UP

2. Adjust the speaker output levels.

1) Press LEVEL ADJUST repeatedly

until one of the following indications

appears on the display.

“CENTER”:

To adjust the center speaker level.

“REAR L”:

To adjust the left rear speaker level.

“REAR R”:

To adjust the right rear speaker level.

2) Press CONTROL UP 5/DOWN °to

adjust the selected speaker output level

(from –10 dB to +10 dB).

3) Repeat 1) and 2) to adjust the other

speaker output levels.

TAL LEVEL

Q ADJUST

CONTROL

DOWN UP

4.Adjust the center tone.

1)Press EFFECT repeatedly until “CTR TONE” appears on the display.

The display shows the current setting.

2)Press CONTROL UP 5/DOWN °to select the center tone level you want.

•Each time you press the button, the display changes to show the following:

EFFECT SETT

CONTROL

DOWN UP

3. Adjust the center tone.

1)

Press EFFECT repeatedly until “CTR

 

TONE” appears on the display.

 

The display shows the current setting.

2)

Press CONTROL UP 5/DOWN °to

 

select the center tone level you want.

 

The center tone adjustment affects the

 

mid-frequency range, which the human

EFFECT SETT

CONTROL

DOWN UP

CTR TONE 1 CTR TONE 2 CTR TONE 3

(Softer)(Soft)(Flat)

CTR TONE 5

 

CTR TONE 4

 

(Sharper)

 

(Sharp)

To make the dialogue softer, select “CTR TONE 1” or “CTR TONE 2.”

To make the dialogue clearer, select “CTR TONE 4” or “CTR TONE 5.”

When “CTR TONE 3” is selected, no adjustment is applied.

Adjusting the DAP Modes

You can also use a DAP mode with a Surround mode (see page 30).

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 17).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

•You cannot adjust the rear speaker output level when you have set “REAR SPK” to “NONE.” See page 17.

•You cannot adjust the center speaker output level when you have set “CTR SPK” to “NONE.” See page 17.

•To adjust the front speaker output balance and subwoofer output level, see pages 16 and 17.

voice is mostly made up of.

• Each time you press the button, the

display changes to show the following:

CTR TONE 1 CTR TONE 2 CTR TONE 3

(Softer)(Soft)(Flat)

CTR TONE 5

 

CTR TONE 4

 

(Sharper)

 

(Sharp)

To make the dialogue softer, select “CTR TONE 1” or

“CTR TONE 2.”

To make the dialogue clearer, select “CTR TONE 4” or “CTR TONE 5.”

When “CTR TONE 3” is selected, no adjustment is applied.

Continued to the next page.

28

Page 30 Page 32
Image 31
Page 30 Page 32
Contents RX-8012VSL Precaución English Español Português Table of Contents USB AUDIO, FM/AM Remote Control Front PanelParts Identification 3 4 5 6 7 Pqw e r tSetting the Voltage Selector Switch Before InstallationChecking the Supplied Accessories Connecting the FM and AM AntennasAM Antenna Connections Connecting the SpeakersBasic connecting procedure Connecting the front speakersAbout the speaker impedance Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVCRs To audio outputCassette deck or MD recorder Video component connectionsDVD player When connecting the TV to the Audio jacks TV SoundConnecting and disconnecting the equipment frequently TV and/or DBS tuner Video cameraDigital input terminals Digital ConnectionsDigital output terminal USB cable Change the PC audio settingUSB Connection Lamp on the USB Audio button lights upReplace the cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletSelecting the Source to Play Turning the Power On and Off StandbyBefore using the remote control Basic OperationsSignal and speaker indicators on the display Adjusting the VolumeSelecting different sources for picture and sound Midnight 1 Midnight Normal Listening at Night Midnight ModeSelecting the Front Speakers Muting the SoundReinforcing the Bass Activating the Subwoofer Sound Attenuating the Input SignalSelecting the Line Direct Function Using the Sleep Timer Adjusting the Equalization PatternsRecording a Source Changing the Source Name Basic SettingsAdjusting the Front Speaker Output Balance Selecting the Video Input TerminalAdjusting the Subwoofer Output Level Setting the Subwoofer InformationSetting the Speakers for a Surround Field To select the delay time of the rear CTR Delay Center Delay Appears on the displayTo select the delay time Rear Delay appears on DisplayDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input Mode To turn on the One Touch Operation Basic Setting and Adjustment Auto MemoryTo store the volume level Showing the Text Information on DisplayReceiving Radio Broadcasts Tuning in Stations Manually Using Preset TuningSelecting the FM Reception Mode Surround modes Creating a Surround Field in Your RoomDSP modes 3D-PHONIC modes DVD Multi Playback ModeHeadphone DSP mode Reproducing the Sound FieldAvailable DSP modes Available DSP Modes According to the Speaker ArrangementAdjusting the Surround Modes Adjust the speaker output levels Adjust the speaker output levelsAdjust the center tone Adjusting the DAP ModesDAP mode you want to adjust Adjust the room size sense of spaciousnessAdjust the liveness Press DSP Mode repeatedly untilAdjusting the Surround Modes with DAP Modes Liveness 1 Liveness 2 Liveness Press Liveness to adjustLiveness Adjust the speaker output levels Press Room Size to adjustOnly Adjusting the 5 CH/4 CH Stereo ModePress DSP Mode repeatedly until DSP Mode Press DSP Mode repeatedly until ModeAdjusting the 3D-PHONIC Modes Center tone level you want Press CTR Tone to selectMemo ----------English Activating the DVD Multi Playback Mode Using the DVD Multi Playback ModePress Menu Using the On-Screen MenusThen press 2 To Level ADJUST, then pressPress 5 / to move to Sound CONTROL, then press 2 Press 5 / to move to Digital EQPress 5/ to move to Sound CONTROL, then press 2 Press 5/ to move to Effect ADJUST, then press 2Press 5/ to move To Level ADJUST, then press 2 Select DVD Multi as the playing sourceSelect FM or AM as the playing source Press 5/ to move To Preset MEMORY, then press 2Press 5/ to move to Tuner CONTROL, then press 2 Setting 2 menu Press 5 / to move To Setting Then press 2To the item you want to set or adjust, then press 2 Setting the Basic Setting ItemsSame time Compu Link Remote Control SystemPress the play 3 button on the CD player Disc Search Only for CD Player Text Compu Link Remote Control SystemCD player MD recorder Displaying the Disc Information on the TV screenPress Exit Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen To exit from the Disc information screenPress SET again Press Text Display while CD is selected as the sourcePress 5 / to move to SEARCH, then Press SET Press 5 / to move To Performer Then press SETSearch for a disc by its genre Press 5/ to move to GENRE, then Press SETPress 5/ to move to Title Input Then press SET Entering the Disc InformationPress 5/ to move Press 5/ / 2/ 3toPress Text Display while MD is selected as the source Move to Disc Michael in this Example, then press SETVCR AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionOne-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlaySound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCassette deck CD changerTurntable CD recorderTV/VIDEO Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks DVD playerTry to operate your TV by pressing TV If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Release TVRelease VCR Release CATV/DBSTry to operate your VCR by pressing VCR Release Audio Problem Possible Cause Solution TroubleshootingOn the front Video SpecificationsAmplifier AudioGeneral Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF AM tunerPrecaução para a ligação à tensão da rede CA Voltage SelectorPrecaución para la línea de la red CA

RX-8012VSL specifications

The JVC RX-8012VSL is a versatile and robust audio/video receiver that epitomizes the merging of performance and functionality in home entertainment systems. This model is notable for its exceptional sound quality, making it a popular choice for audiophiles and casual listeners alike.

One of the main features that set the RX-8012VSL apart is its robust 5.1-channel audio setup. This configuration delivers a rich surround sound experience that immerses listeners in their favorite movies and music. With a power output of 100 watts per channel, this receiver can easily fill large rooms with dynamic audio.

The RX-8012VSL supports a variety of audio formats, including Dolby Digital and DTS, which enhance the listening experience with clear dialogue and a profound sense of depth. The integration of JVC's proprietary 3D Surround technology further elevates sound reproduction, creating an enveloping audio environment that enhances home theater experiences.

This receiver also boasts an array of inputs and outputs designed for modern connectivity needs. With multiple HDMI inputs, users can easily connect various devices such as Blu-ray players, gaming consoles, and streaming devices. HDMI pass-through features allow for seamless switching between sources while maintaining high-definition video quality, an essential characteristic for any contemporary home theater setup.

The RX-8012VSL supports 4K video pass-through, ensuring compatibility with the latest high-definition content. Additionally, the receiver includes a sweeping array of audio adjustments, allowing users to fine-tune settings according to their specific needs or room acoustics, which is especially useful in delivering optimized sound performance.

In terms of design, the RX-8012VSL embraces a sleek and modern aesthetic, featuring an easy-to-navigate front panel with a clear LCD display. The intuitive user interface and remote control enhance usability, allowing users to switch settings effortlessly.

Another noteworthy feature is the built-in radio tuner, which allows access to FM and AM stations, adding more diversity to the entertainment options. With all its features and capabilities, the JVC RX-8012VSL embodies a perfect blend of aesthetic appeal, user-friendly operation, and audio excellence, making it an ideal choice for any home theater enthusiast.
Top Page Image Contents