JVC RX-8012VSL manual Operating JVC’s Audio/Video Components, Operating Audio Components, Tuner

English

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC components are preset in the remote control.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC audio components through the COMPU LINK (SYNCHRO) jacks (see page 41) in addition to the connections using cables with RCA pin plugs (see pages 5 and 6).

•Aim the remote control directly at the remote sensor on the receiver.

•If you use the buttons on the front panel or the menu function to choose a source, the remote control will not operate that source. To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 16.)

•Refer also to the manuals supplied with your components.

CATV/DBS	VCR 1	TV	AUDIO
DVD	DVD MUILTI	CD	FM/AM
TV/DBS	VIDEO	CDR	PHONO
VCR 1	VCR 2	TAPE/MD	USB
SURROUND	DSP ANALOG/DIGITAL		SLEEP
ON/OFF	MODE	INPUT
	BASS		ROOM
LINEDIF.ECT	BOOST	EFFECT	SIZE
	1	2	3
MIDNIGHT		MENU
MODE	TEST	CTRTONE	LIVENESS
	4	5	6
	∗SUBWFR	ENTER
SOUND		∗L/R BAL	∗CENTER
	7/P	8	9
MUTING ∗DIGITALEQ ∗REARL			∗REARR
	10	0	+10
	RETURN	FMMODE	100+
CATV/DBS	+∗BAL L +
CONTROL			+
TV/VIDEO	CH/∗LEVEL TV VOL		VOLUME
	−∗BAL R −		−
MENU		PLAY	EXIT
TEXT	/REW	PAUSE	FF/
DISPLAY
		SET
REC	DOWN – TUNING – UP
PAUSE
		STOP	CONTROL

RM-SRX8012U

A/V CONTROL RECEIVER

Note:

When you press one of the following buttons mentioned in this section, the operation mode appears on the display window for about 10 seconds. For example, the above illustration shows that you have pressed CD.

Buttons	Indications
FM/AM	TUNER
CD	CD
CDR	CDR
PHONO	PHONO
TAPE/MD	TAPE
CONTROL (repeatedly)	VCR 1	TAPE
	CDDSC	CDR
SOUND	SOUND

Tuner

You can always perform the following operations:

FM/AM: Alternates between FM and AM.

After pressing FM/AM, you can perform the following operations:

1 – 10, +10:	Selects a preset channel number
	directly.
	For channel number 5, press 5.
	For channel number 15, press +10,
	then 5.
	For channel number 20, press +10, then
	10.
TUNING UP 3/DOWN 2: Tunes into stations.
FM MODE:	Changes the FM reception mode.

Sound control section (Amplifier)

You can always perform the following operations:

SURROUND ON/OFF:	Turns on or off the Surround modes
	— Dolby Pro Logic, Dolby Digital,
	and DTS Digital Surround.
DSP MODE:	Selects the DSP modes.

After pressing SOUND, you can perform the following operations:

SUBWFR then LEVEL +/ –:Adjusts the subwoofer output level.

L/R BAL then BAL L/BAL R: Adjusts the front speaker output balance.

CENTER then LEVEL +/ –: Adjusts the center speaker output level.

REAR L then LEVEL +/ –: Adjusts the left rear speaker output level.

REAR R then LEVEL +/ –: Adjusts the right rear speaker output level. DIGITAL EQ then LEVEL+/ –:Selects the audio band and adjusts

	its frequency level.
EFFECT:	Selects the effect level.
TEST:	Turns on or off the test tone output.
CTR TONE:	Selects the center tone.
ROOM SIZE:	Selects the room size.
LIVENESS:	Selects the liveness.

Note:

After adjusting sounds, press the corresponding source selecting button to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

CD player

After pressing CD, you can perform the following operations on the CD player:

3PLAY:	Starts playing.
4:	Returns to the beginning of the current
¢:	(or previous) track.
	Skips to the beginning of the next track.
7 STOP:	Stops playing.
8 PAUSE:	Pauses playing. To release it, press

3 PLAY.

1– 10, +10:Selects a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10. For track number 30, press +10, +10, then 10.

49