JVC RX-8012VSL manual Precaución

Page 2

Warnings, Cautions and Others / Avisos, precauciones y otras notas / Advertêcias, precauções e outras notas

Caution –– switch!

Disconnect the mains plug to shut the power off completely. The switch in any position does not disconnect the mains line. The power can be remote controlled.

Precaución –– Interruptor !

Desconectar el cable de alimentación para desactivar la alimentación totalmente. Cualquier que sea la posición de ajuste del interruptor , la alimentación no es cortada completamente. La alimentación puede ser controlada remotamente.

Precaução –– Interruptor!

Desconectar o cabo de alimentação para desligar a alimentação por

completo. Qualquer que seja a posição de ajuste do interruptor , a alimentação não é completamente cortada. A alimentação pode ser controlada remotamente.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

CAUTION

Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

Do not place any naked flame sources, such as lighted candles, on the apparatus.

When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

Do not use this apparatus in a bathroom or places with water. Also do not place any containers filled with water or liquids (such as cosmetics or medi- cines, flower vases, potted plants, cups, etc.) on top of this apparatus.

PRECAUCIÓN

Para reducir riesgos de choques eléctricos, incendio, etc.:

1.No extraiga los tornillos, los cubiertas ni la caja.

2.No exponga este aparato a la lluvia o a la humedad.

PRECAUCION

No obstruya las rendijas o los orificios de ventilación. (Si las rendijas o los orificios de ventilación quedan tapados con un periódico, un trozo de tela, etc., no se podrá disipar el calor).

No ponga sobre el aparato ninguna llama al descubierto, como velas encendidas.

Cuando tenga que descartar las pilas, tenga en cuenta los problemas ambientales y observe estrictamente los reglamentos o las leyes locales sobre disposición de las pilas.

No utilice este aparato en el cuarto de baño o en lugares donde hay agua. Tampoco coloque ningún recipiente que contenga agua u otros líquidos (frascos de cosmé- ticos o medicinas, floreros, macetas, vasos, etc.) enci- ma de este aparato.

ATENÇÃO

Para reduzir riscos de choques eléctricos, incêndio, etc.:

1.Não retire parafusos nem desmonte as tampas ou o gabinete.

2.Não exponha este aparelho à chuva nem à umidade.

AVISO

Não obstrua as aberturas e orifícios de ventilação. (Se os orifícios ou aberturas de ventilação estiverem obstruídos por qualquer papel ou tecido, não haverá circulação do ar quente.)

Não coloque nenhum objeto com chamas, como velas acesas, sobre o aparelho.

Ao descartar as baterias, leve em consideração os problemas que possam ser causados ao meio ambiente e os regulamentos e leis locais e governamentais sobre recolhimento dessas baterias devem ser rigorosamente seguidos.

Não utilize este aparelho em banheiros ou em locais com água. Além disso, não coloque nenhum recipiente com água ou qualquer tipo de líquido (como cosméticos ou remédios, vasos com flores, plantas, xícaras, etc.) sobre o aparelho.

G-1

Image 2
Contents RX-8012VSL Precaución English Español Português Table of Contents 3 4 5 6 7 Pqw e r t Remote Control Front PanelParts Identification USB AUDIO, FM/AMConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Setting the Voltage Selector SwitchConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers About the speaker impedanceVideo component connections To audio outputCassette deck or MD recorder VCRsTV and/or DBS tuner Video camera When connecting the TV to the Audio jacks TV SoundConnecting and disconnecting the equipment frequently DVD playerDigital output terminal Digital ConnectionsDigital input terminals Lamp on the USB Audio button lights up Change the PC audio settingUSB Connection USB cablePlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Replace the coverBasic Operations Turning the Power On and Off StandbyBefore using the remote control Selecting the Source to PlaySelecting different sources for picture and sound Adjusting the VolumeSignal and speaker indicators on the display Muting the Sound Listening at Night Midnight ModeSelecting the Front Speakers Midnight 1 Midnight NormalSelecting the Line Direct Function Activating the Subwoofer Sound Attenuating the Input SignalReinforcing the Bass Recording a Source Adjusting the Equalization PatternsUsing the Sleep Timer Selecting the Video Input Terminal Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NameSetting the Speakers for a Surround Field Setting the Subwoofer InformationAdjusting the Subwoofer Output Level Rear Delay appears on Display CTR Delay Center Delay Appears on the displayTo select the delay time To select the delay time of the rearDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input Mode Showing the Text Information on Display Basic Setting and Adjustment Auto MemoryTo store the volume level To turn on the One Touch OperationTuning in Stations Manually Using Preset Tuning Receiving Radio BroadcastsSelecting the FM Reception Mode DSP modes Creating a Surround Field in Your RoomSurround modes Reproducing the Sound Field DVD Multi Playback ModeHeadphone DSP mode 3D-PHONIC modesAvailable DSP Modes According to the Speaker Arrangement Available DSP modesAdjusting the Surround Modes Adjusting the DAP Modes Adjust the speaker output levelsAdjust the center tone Adjust the speaker output levelsPress DSP Mode repeatedly until Adjust the room size sense of spaciousnessAdjust the liveness DAP mode you want to adjustAdjusting the Surround Modes with DAP Modes Press Room Size to adjust Press Liveness to adjustLiveness Adjust the speaker output levels Liveness 1 Liveness 2 LivenessPress DSP Mode repeatedly until Mode Adjusting the 5 CH/4 CH Stereo ModePress DSP Mode repeatedly until DSP Mode OnlyAdjusting the 3D-PHONIC Modes Memo ----------English Press CTR Tone to selectCenter tone level you want Using the DVD Multi Playback Mode Activating the DVD Multi Playback ModeUsing the On-Screen Menus Press MenuPress 5 / to move to Digital EQ To Level ADJUST, then pressPress 5 / to move to Sound CONTROL, then press 2 Then press 2Select DVD Multi as the playing source Press 5/ to move to Effect ADJUST, then press 2Press 5/ to move To Level ADJUST, then press 2 Press 5/ to move to Sound CONTROL, then press 2Press 5/ to move to Tuner CONTROL, then press 2 Press 5/ to move To Preset MEMORY, then press 2Select FM or AM as the playing source Setting the Basic Setting Items Press 5 / to move To Setting Then press 2To the item you want to set or adjust, then press 2 Setting 2 menuPress the play 3 button on the CD player Compu Link Remote Control SystemSame time Displaying the Disc Information on the TV screen Text Compu Link Remote Control SystemCD player MD recorder Disc Search Only for CD PlayerTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen Press ExitPress 5 / to move To Performer Then press SET Press Text Display while CD is selected as the sourcePress 5 / to move to SEARCH, then Press SET Press SET againEntering the Disc Information Press 5/ to move to GENRE, then Press SETPress 5/ to move to Title Input Then press SET Search for a disc by its genreMove to Disc Michael in this Example, then press SET Press 5/ / 2/ 3toPress Text Display while MD is selected as the source Press 5/ to moveConnections 2 Video Cable Connection AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection VCROne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierCD recorder CD changerTurntable Cassette deckDVD player Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks TV/VIDEORelease TV If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressing TVTry to operate your VCR by pressing VCR Release CATV/DBSRelease VCR Release Audio Troubleshooting Problem Possible Cause SolutionOn the front Audio SpecificationsAmplifier VideoAM tuner Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF GeneralPrecaución para la línea de la red CA Voltage SelectorPrecaução para a ligação à tensão da rede CA

RX-8012VSL specifications

The JVC RX-8012VSL is a versatile and robust audio/video receiver that epitomizes the merging of performance and functionality in home entertainment systems. This model is notable for its exceptional sound quality, making it a popular choice for audiophiles and casual listeners alike.

One of the main features that set the RX-8012VSL apart is its robust 5.1-channel audio setup. This configuration delivers a rich surround sound experience that immerses listeners in their favorite movies and music. With a power output of 100 watts per channel, this receiver can easily fill large rooms with dynamic audio.

The RX-8012VSL supports a variety of audio formats, including Dolby Digital and DTS, which enhance the listening experience with clear dialogue and a profound sense of depth. The integration of JVC's proprietary 3D Surround technology further elevates sound reproduction, creating an enveloping audio environment that enhances home theater experiences.

This receiver also boasts an array of inputs and outputs designed for modern connectivity needs. With multiple HDMI inputs, users can easily connect various devices such as Blu-ray players, gaming consoles, and streaming devices. HDMI pass-through features allow for seamless switching between sources while maintaining high-definition video quality, an essential characteristic for any contemporary home theater setup.

The RX-8012VSL supports 4K video pass-through, ensuring compatibility with the latest high-definition content. Additionally, the receiver includes a sweeping array of audio adjustments, allowing users to fine-tune settings according to their specific needs or room acoustics, which is especially useful in delivering optimized sound performance.

In terms of design, the RX-8012VSL embraces a sleek and modern aesthetic, featuring an easy-to-navigate front panel with a clear LCD display. The intuitive user interface and remote control enhance usability, allowing users to switch settings effortlessly.

Another noteworthy feature is the built-in radio tuner, which allows access to FM and AM stations, adding more diversity to the entertainment options. With all its features and capabilities, the JVC RX-8012VSL embodies a perfect blend of aesthetic appeal, user-friendly operation, and audio excellence, making it an ideal choice for any home theater enthusiast.