10.Apply grease to the axle on the Right Upper Body Arm (12). Then, apply grease to a 23mm x 19mm Wave Washer (97) and to an M8 x 23mm x 1mm Washer (112).
Slide an Upper Body Arm Spacer (62) onto the Right Upper Body Arm (12); make sure that the flat side of the Upper Body Arm Spacer is facing outward. Then, place the 23mm x 19mm Wave Washer (97) on the Right Upper Body Arm.
Slide the Right Pedal Leg (16) onto the Right Upper Body Arm (12). Attach the Right Pedal Leg with an M8 x 23mm Shoulder Screw (115), an M8 x 16mm Washer (110), a Pedal Leg Cover (31), and the M8 x 23mm x 1mm Washer (112).
Repeat this step for the Left Pedal Leg (14) and the Left Upper Body Arm (11).
11.Apply grease to the bracket on the Crank Bushing Sleeve (43) and to an M10 x 58mm Shoulder Bolt (71).
Insert the right Link Arm (20) into the Crank Bushing Sleeve (43). Attach the right Link Arm with the M10 x 58mm Shoulder Bolt (71), an M8 Washer (88), and a M8 Nylon Locknut (78).
Repeat this step on the other side of the elliptical exerciser.
10 |
|
11 |
|
| 12 |
14 | Grease |
62 | 97 16 |
31 | |
| 115 |
| 112 |
| 110 |
| Grease |
11 |
|
71 | Grease |
| |
| 88 |
| 20 |
| 43 |
| 78 |
10