ProForm PFEL64907.0 user manual

1.	To make assembly easier, read the	1
	information on page 5 before you begin
	assembling the elliptical exerciser.
	While another person lifts the Base (1), attach	6	82
	the Front Stabilizer (6) to the Base with two
	M10 x 82mm Button Screws (82).
	Next, hold the Left and Right Stabilizer Covers	118
	(118, 119) around the Base (1). Attach the		119
	Stabilizer Covers with six M4 x 16mm Round
	Head Screws (101) (only three are shown).
		1	101
2. Remove the indicated screw and bracket		2
	from the Base (1). Discard the screw and the
	bracket.
	Next, turn the Base Foot (26) into the Base (1)
	as far as possible.

		1
		Bracket
		26
		Screw
3. Attach the Rear Stabilizer (7) to the Frame (2)	3	83
with two M10 x 127mm Button Screws (83).
Next, hold the handle on the Frame (2), press		7
the Latch Button (68), and lower the Frame until
the Rear Stabilizer (7) is resting on the floor.
		Handle
		2
		68
	6