JVC RX-668RBK manual Connecting the Power Cord, Putting Batteries in the Remote Control

Page 10

English

Connecting the Power Cord

Before plugging the receiver into an AC outlet, make sure that all connections have been made.

Plug the power cord into an AC outlet.

Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference. We recommend that you use a coaxial cable to connect the antenna, since it is well-shielded against interference.

Note:

The preset settings such as preset channel and sound adjustment may be erased in a few days in the following cases:

–When you unplug the power cord.

–When a power failure occurs.

CAUTIONS:

•Do not touch the power cord with wet hands.

•Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

Putting Batteries in the Remote Control

Before using the remote control, put two supplied batteries first. When using the remote control, aim the remote control directly at the remote sensor on the receiver.

1.On the back of the remote control, remove the battery cover as illustrated.

2.Insert batteries. Make sure to observe the proper polarity: (+) to (+) and (–) to (–).

 

-

+

+

-

 

R6P (SUM-3)/AA (15F)

3. Replace the cover.

If the range or effectiveness of the remote control decreases, replace the batteries. Use two R6P (SUM-3)/AA (15F) type dry-cell batteries.

CAUTION:

Follow these precautions to avoid leaking or cracking cells:

•Place batteries in the remote control so they match the polarity indicated: (+) to (+) and (–) to (–).

•Use the correct type of batteries. Batteries that look similar may differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents RX-668RBK Per I’ltalia Español Italiano Table of Contents Front Panel Remote ControlParts Identification To use the Cursor control buttons w on the front panelChecking the Supplied Accessories Before InstallationConnecting the FM and AM MW/LW Antennas Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure Connecting the rear and center speakersConnecting the subwoofer speaker Connecting Audio/Video ComponentsAudio component connections DVD player Video component connectionsTV or Monitor InputPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Replace the coverBasic Operations Turning the Power On and Off StandbyFrom the remote control On the front panelMuting the Sound Selecting the Front SpeakersRecording a Source Adjusting the Tone Attenuating the Input SignalAdjusting the Front Speaker Output Balance Reinforcing the BassPress Setting so that the cursor Basic SettingsSetting Center and Rear Speakers for DSP Modes Changing the Source NameAdjust the sound using the functions listed above Using the Sleep TimerPress ONE Touch Operation Using Preset Tuning Tuning in Stations ManuallyReceiving Radio Broadcasts When an FM stereo broadcast is hard to receive or noisy Using the RDS Radio Data System to Receive FM StationsWhat Information Can RDS Signals Provide? Press PTY Search while To search for a program using the PTY codesSearching for a Program by PTY Codes Listening to an FM stationPress TA/NEWS/INFO until Switching to a Broadcast Program of Your Choice TemporarilyProgram type you want appears on Display Surround Modes Using the DSP Modes3D-PHONIC modes Dolby SurroundRear Available DSP Modes According to the Speaker ArrangementFront Rear SpeakerAdjusting the 3D-PHONIC Modes Adjusting DAP ModesOutput balance Press Rearl / + to adjust the rear speaker output levelUntil the mode PRO Logic Or Theater appears on Display Rear speaker output level from 10 to +10Activating the DSP Modes Press Surround repeatedly Until the DSP mode you wantTo cancel the DSP mode Select and play a sound sourceUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeUsing the On-Screen Menus Bass Boost function To Bass BoostPress @/ #to turn On or OFFPress % / Þto move to Surround LEVEL, then press @/ # Press %/ Þ/ @/ #to adjust the tone as you wantPress %/ Þto move to SETTING, then press @/ # Press %/ Þto move to Tone CONTROL, then press @/ #Press %/ Þto move To Tuner CONTROL, then Press @/ # Press %/ Þto move to Preset MEMORY, then press @/ #Storing the Preset Stations Also see Press %/ Þto move to RDS INFORMATION, then press @/ #Same time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemCD player MD recorder Disc Search Only for CD PlayerTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen Press on Screen Exit againPress %/ Þto move to PERFORMER, then press on Press Text Display while CD is selected as the sourcePress %/ Þto move to SEARCH, then Press on Screen SET Press on Screen SET againThen press on Screen SET Press %/ Þto move To Search Then press onPress %/ Þto move To GENRE, then Press on Screen Entering the Disc InformationPress Text Display while MD is selected as the source Up to 32 characters to this User FileEnter the disc title, referring to steps 3 For the MD recorderSound control section Amplifier Operating JVC’s Audio/Video ComponentsTuner CD playerMD recorder Cassette deckDVD player Troubleshooting Problem Possible Cause SolutionFM tuner IHF SpecificationsAmplifier AM MW/LW tunerEN, GE, FR, NL, SP, IT 0299JTMMDWJEM

RX-668RBK specifications

The JVC RX-668RBK is a commendable addition to the world of home audio receivers, delivering a blend of impressive features and robust sound performance ideal for both casual listeners and audiophiles alike. This 5.1-channel AV receiver stands as a testament to JVC's commitment to quality and innovation in home entertainment systems.

One of the standout features of the RX-668RBK is its power output. Capable of delivering up to 100 watts per channel, the receiver ensures that users can enjoy clear, dynamic sound at any volume level. The receiver supports a range of audio formats, including Dolby Digital and DTS, which provide an immersive experience during movie nights or while enjoying music. This multi-channel setup allows for true surround sound, transporting listeners straight into the action.

The RX-668RBK is equipped with a sophisticated digital signal processing technology that enhances audio quality across different types of content. The built-in equalizer function offers users the flexibility to customize their sound preferences, allowing for adjustments based on the specifics of the room and the type of media being played. Whether you are watching a fast-paced action film or listening to your favorite album, the receiver adapts seamlessly to deliver optimal sound performance.

Connectivity options are plentiful, as the RX-668RBK features multiple HDMI inputs, enabling users to connect a variety of sources, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also includes optical and coaxial digital inputs, as well as analog audio inputs, ensuring compatibility with both modern and legacy devices. Additionally, the front USB input allows for easy connectivity to USB sources, making it simple to play digital music files.

The user interface of the JVC RX-668RBK is designed for convenience, featuring an intuitive on-screen display that simplifies setup and navigation. The remote control enhances this ease of use, allowing users to manage their audio settings and select input sources from the comfort of their couch.

Overall, the JVC RX-668RBK stands out for its robust feature set, superior sound processing technologies, and versatile connectivity options. It is a reliable choice for anyone looking to enhance their home audio experience, creating a perfect blend of convenience, quality, and exceptional performance.
Top Page Image Contents