JVC RX-668RBK manual Español Italiano

Page 3

Caution: Proper Ventilation

To avoide risk of electric shock and fire and to protect from damage. Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Achtung: Angemessene Ventilation

Stellen Sie das Gerät zur Verhütung von elektrischem Schlag und Feuer und zum Schutz gegen Beschädigung wie folgt auf: Vorderseite: Offener Platz ohne Hindernisse.

Seiten: Keine Hindernisse innerhalb 10 cm von den Seiten.

Oberseite: Keine Hindernisse innerhalb 10 cm von der Oberseite.

Rückseite: Keine Hindernisse innerhalb 15 cm von der Rückseite.

Unterseite: Keine Hindernisse. Auf eine ebene Oberfläche stellen. Zusätzlich die bestmögliche Luftzirkulation wie gezeigt erhalten.

Attention: Ventilation Correcte

Pour éviter les chocs électriques, l’incendie et tout autre dégât. Disposer l’appareil en tenant compte des impératifs suivants

Avant:

Rien ne doit gêner le dégagement

Flancs:

Laisser 10 cm de dégagement latéral

Dessus:

Laisser 10 cm de dégagement supérieur

Arrière:

Laisser 15 cm de dégagement arrière

Dessous:

Rien ne doit obstruer par dessous; poser l’appareil sur

une surface plate.

Veiller également à ce que l’air circule le mieux possible comme illustré.

Voorzichtig: Zorg Voor Goede Ventilatie

Om gevaar voor brand of een elektrische schok te voorkomen, dient u bij opstelling van het apparaat op de volgende punten te letten:

Voorkant:

Voldoende ruimte vrij houden.

Zijkanten:

Minstens 10 cm aan weerszijden vrij houden.

Bovenkant:

Niets bovenop plaatsen; 10 cm speling geven.

Achterkant: Minstens 15 cm ruimte achteraan vrij houden.

Onderkant: Opstellen op een egaal horizontaal oppervlak. Bovendien moet er rondom voldoende luchtdoorstroming zijn, zoals in de afbeelding aangegeven.

Precaución: Ventilación Adecuada

Para evitar el riesgo de choque eléctrico e incendio y para proteger el aparato contra daños.

Ubique el aparato de la siguiente manera:

Frente:

Espacio abierto sin obstrucciones

Lados:

10 cm sin obstrucciones a los lados

Parte superior:

10 cm sin obstrucciones en la parte superior

Parte trasera:

15 cm sin obstrucciones en la parte trasera

Fondo:

Sin obstrucciones, colóquelo sobre una superficie

 

nivelada

Además, mantenga la mejor circulación de aire posible como se ilustra.

Attenzione: Problemi di Ventilazione

Per evitare il rischio di folgorazioni ed incendi e proteggere l’unità da danni, installarla nel modo seguente.

Davanti:

Nessun ostacolo, spazio libero

Lati:

Nessun ostacolo per almeno 10 cm

Sopra:

Nessun ostacolo per almeno 10 cm

Retro:

Nessun ostacolo per almeno 15 cm

Fondo:

Libero ed in piano

Inoltre, mantenere il più possibile la circolazione dell’aria.

English

Deutsch

Français

Nederlands

Wall or obstructions Wand oder Hindernisse Mur, ou obstruction Wand of meubilair Pared u obstrucciones Parete o ostacol

Spacing 15 cm or more Abstand von 15 cm oder mehr Dégagement de 15 cm ou plus Minstens 15 cm tussenruimte Espacio de 15 cm o más

15 cm di distanza o più

RX-668RBK

Front

Vorderseite

Avant

Voorkant

Frente

Davanti

Stand height 15 cm or more Standhöhe 15 cm oder mehr Hauteur du socle: 15 cm ou plus Standard op minstens 15 cm van de vloer Allura del soporte 15 cm o más Altezza del tavolino 15 cm p plù

Español

Italiano

Floor

Boden

Plancher

Vloer

Piso

Pavimento

G-2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents RX-668RBK Per I’ltalia Español Italiano Table of Contents To use the Cursor control buttons w on the front panel Remote ControlParts Identification Front PanelGetting Started Before InstallationConnecting the FM and AM MW/LW Antennas Checking the Supplied AccessoriesConnecting the rear and center speakers Connecting the SpeakersBasic connecting procedure Connecting the front speakersConnecting Audio/Video Components Connecting the subwoofer speakerAudio component connections Input Video component connectionsTV or Monitor DVD playerReplace the cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletOn the front panel Turning the Power On and Off StandbyFrom the remote control Basic OperationsSelecting the Front Speakers Muting the SoundRecording a Source Reinforcing the Bass Attenuating the Input SignalAdjusting the Front Speaker Output Balance Adjusting the ToneChanging the Source Name Basic SettingsSetting Center and Rear Speakers for DSP Modes Press Setting so that the cursorUsing the Sleep Timer Adjust the sound using the functions listed abovePress ONE Touch Operation Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Using the RDS Radio Data System to Receive FM Stations When an FM stereo broadcast is hard to receive or noisyWhat Information Can RDS Signals Provide? Listening to an FM station To search for a program using the PTY codesSearching for a Program by PTY Codes Press PTY Search whileSwitching to a Broadcast Program of Your Choice Temporarily Press TA/NEWS/INFO untilProgram type you want appears on Display Dolby Surround Using the DSP Modes3D-PHONIC modes Surround ModesRear Speaker Available DSP Modes According to the Speaker ArrangementFront RearAdjusting DAP Modes Adjusting the 3D-PHONIC ModesRear speaker output level from 10 to +10 Press Rearl / + to adjust the rear speaker output levelUntil the mode PRO Logic Or Theater appears on Display Output balanceSelect and play a sound source Press Surround repeatedly Until the DSP mode you wantTo cancel the DSP mode Activating the DSP ModesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeUsing the On-Screen Menus On or OFF To Bass BoostPress @/ #to turn Bass Boost functionPress %/ Þto move to Tone CONTROL, then press @/ # Press %/ Þ/ @/ #to adjust the tone as you wantPress %/ Þto move to SETTING, then press @/ # Press % / Þto move to Surround LEVEL, then press @/ #Press %/ Þto move to RDS INFORMATION, then press @/ # Press %/ Þto move to Preset MEMORY, then press @/ #Storing the Preset Stations Also see Press %/ Þto move To Tuner CONTROL, then Press @/ #Automatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Same timeDisc Search Only for CD Player Text Compu Link Remote Control SystemCD player MD recorder Displaying the Disc Information on the TV screenPress on Screen Exit again Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen To exit from the Disc information screenPress on Screen SET again Press Text Display while CD is selected as the sourcePress %/ Þto move to SEARCH, then Press on Screen SET Press %/ Þto move to PERFORMER, then press onEntering the Disc Information Press %/ Þto move To Search Then press onPress %/ Þto move To GENRE, then Press on Screen Then press on Screen SETFor the MD recorder Up to 32 characters to this User FileEnter the disc title, referring to steps 3 Press Text Display while MD is selected as the sourceCD player Operating JVC’s Audio/Video ComponentsTuner Sound control section AmplifierCassette deck MD recorderDVD player Problem Possible Cause Solution TroubleshootingAM MW/LW tuner SpecificationsAmplifier FM tuner IHFEN, GE, FR, NL, SP, IT 0299JTMMDWJEM

RX-668RBK specifications

The JVC RX-668RBK is a commendable addition to the world of home audio receivers, delivering a blend of impressive features and robust sound performance ideal for both casual listeners and audiophiles alike. This 5.1-channel AV receiver stands as a testament to JVC's commitment to quality and innovation in home entertainment systems.

One of the standout features of the RX-668RBK is its power output. Capable of delivering up to 100 watts per channel, the receiver ensures that users can enjoy clear, dynamic sound at any volume level. The receiver supports a range of audio formats, including Dolby Digital and DTS, which provide an immersive experience during movie nights or while enjoying music. This multi-channel setup allows for true surround sound, transporting listeners straight into the action.

The RX-668RBK is equipped with a sophisticated digital signal processing technology that enhances audio quality across different types of content. The built-in equalizer function offers users the flexibility to customize their sound preferences, allowing for adjustments based on the specifics of the room and the type of media being played. Whether you are watching a fast-paced action film or listening to your favorite album, the receiver adapts seamlessly to deliver optimal sound performance.

Connectivity options are plentiful, as the RX-668RBK features multiple HDMI inputs, enabling users to connect a variety of sources, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also includes optical and coaxial digital inputs, as well as analog audio inputs, ensuring compatibility with both modern and legacy devices. Additionally, the front USB input allows for easy connectivity to USB sources, making it simple to play digital music files.

The user interface of the JVC RX-668RBK is designed for convenience, featuring an intuitive on-screen display that simplifies setup and navigation. The remote control enhances this ease of use, allowing users to manage their audio settings and select input sources from the comfort of their couch.

Overall, the JVC RX-668RBK stands out for its robust feature set, superior sound processing technologies, and versatile connectivity options. It is a reliable choice for anyone looking to enhance their home audio experience, creating a perfect blend of convenience, quality, and exceptional performance.
Top Page Image Contents