JVC RX-668RBK manual Output balance, Press Rearl / + to adjust the rear speaker output level, Tone

Page 23

From the remote control:

SOUND

1. Press SOUND CONTROL.

CONTROL

 

The 10 keys are activated for sound adjustments.

 

2. Press SURROUND repeatedly

SURROUND

until the DAP mode — LIVE

3

CLUB, DANCE CLUB, HALL, or

 

PAVILION — appears on the

 

display.

 

The DSP and the selected DAP mode indicators also light up on

3. Press TEST to check the speaker

TEST

output balance.

 

2

“TEST TONE L” starts flashing on the

 

 

display, and a test tone comes out of the

 

 

speakers in the following order:

 

 

 

 

 

 

TEST TONE L

 

 

TEST TONE C

 

 

 

 

 

(Left front speaker)

(Center speaker)

 

 

 

 

 

TEST TONE S

TEST TONE R

 

 

 

 

 

(Rear speakers)

 

(Right front speaker)

 

 

Notes:

English

the display.

3.Press REAR•L – / + to adjust the rear speaker output level.

•Pressing REAR•L – decreases the output level up to –10 dB.

•Pressing REAR•L + increases the output level up to +10 dB.

– REAR•L +

8 9

•You can adjust the speaker output levels without outputting the test tone.

•The speaker indicators also light on the display while the test tone comes out of the speakers.

L: Lights when the test tone comes out of the

L C R left front speaker.

C: Lights when the test tone comes out of the

S

center speaker.

R: Lights when the test tone comes out of the

 

 

right front speaker.

Note:

You cannot adjust the left and right rear speaker output levels separately.

4. Press EFFECT to select an effect

EFFECT

level you want.

 

 

4

• Each time you press the button, the effect

 

level changes as follows:

 

 

 

DSP EFFECT 1

 

DSP EFFECT 2

 

DSP EFFECT 3

 

 

DSP EFFECT 5

DSP EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

Adjusting the Surround Modes — Dolby

Surround and JVC Theater Surround

S: Lights when the test tone comes out of the

rear speakers.

4.

Press CENTER – / + repeatedly to

– CENTER +

 

adjust the center speaker output

5

6

 

level (from –10 to +10).

 

 

5.

Press REAR•L – / + to adjust the

– REAR•L +

 

 

rear speaker output level (from

8

9

 

–10 to +10).

 

 

Notes:

•You cannot adjust the left and right rear speaker output levels separately.

•You cannot use the REAR•R –/+ buttons to adjust the rear speaker output levels.

TEST

6. Press TEST again to stop the test

Before you start, remember...

tone.

2

•Make sure that you have set the speaker information correctly (see page 11).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You can only adjust the effect level when selecting JVC Theater Surround.

•You can only adjust the rear and/or center speaker output levels when you have connected rear speakers and/or a center speaker and have set “REAR SPK” and/or “CENTER SPK” correctly. See page 11.

From the remote control:

SOUND

 

CONTROL

1. Press SOUND CONTROL.

The 10 keys are activated for sound adjustments.

2. Press SURROUND repeatedly

SURROUND

until the mode — “PRO LOGIC”

3

or “THEATER” — appears on the

 

display.

 

•When selecting “PRO LOGIC,” the PRO LOGIC indicator also lights up on the display.

•When selecting “THEATER,” the DSP, PRO LOGIC and THEATER indicators also light up on the display.

7. ONLY FOR “THEATER”:

Press EFFECT to select an effect

EFFECT

4

level you want.

 

•Each time you press the button, the effect level changes as follows:

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5

DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

20

Page 22 Page 24
Image 23
Page 22 Page 24
Contents RX-668RBK Per I’ltalia Español Italiano Table of Contents To use the Cursor control buttons w on the front panel Remote ControlParts Identification Front PanelGetting Started Before InstallationConnecting the FM and AM MW/LW Antennas Checking the Supplied AccessoriesConnecting the rear and center speakers Connecting the SpeakersBasic connecting procedure Connecting the front speakersAudio component connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Input Video component connectionsTV or Monitor DVD playerReplace the cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletOn the front panel Turning the Power On and Off StandbyFrom the remote control Basic OperationsRecording a Source Selecting the Front SpeakersMuting the Sound Reinforcing the Bass Attenuating the Input SignalAdjusting the Front Speaker Output Balance Adjusting the ToneChanging the Source Name Basic SettingsSetting Center and Rear Speakers for DSP Modes Press Setting so that the cursorPress ONE Touch Operation Using the Sleep TimerAdjust the sound using the functions listed above Receiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning What Information Can RDS Signals Provide? Using the RDS Radio Data System to Receive FM StationsWhen an FM stereo broadcast is hard to receive or noisy Listening to an FM station To search for a program using the PTY codesSearching for a Program by PTY Codes Press PTY Search whileProgram type you want appears on Display Switching to a Broadcast Program of Your Choice TemporarilyPress TA/NEWS/INFO until Dolby Surround Using the DSP Modes3D-PHONIC modes Surround ModesRear Speaker Available DSP Modes According to the Speaker ArrangementFront RearAdjusting DAP Modes Adjusting the 3D-PHONIC ModesRear speaker output level from 10 to +10 Press Rearl / + to adjust the rear speaker output levelUntil the mode PRO Logic Or Theater appears on Display Output balanceSelect and play a sound source Press Surround repeatedly Until the DSP mode you wantTo cancel the DSP mode Activating the DSP ModesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeUsing the On-Screen Menus On or OFF To Bass BoostPress @/ #to turn Bass Boost functionPress %/ Þto move to Tone CONTROL, then press @/ # Press %/ Þ/ @/ #to adjust the tone as you wantPress %/ Þto move to SETTING, then press @/ # Press % / Þto move to Surround LEVEL, then press @/ #Press %/ Þto move to RDS INFORMATION, then press @/ # Press %/ Þto move to Preset MEMORY, then press @/ #Storing the Preset Stations Also see Press %/ Þto move To Tuner CONTROL, then Press @/ #Automatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Same timeDisc Search Only for CD Player Text Compu Link Remote Control SystemCD player MD recorder Displaying the Disc Information on the TV screenPress on Screen Exit again Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen To exit from the Disc information screenPress on Screen SET again Press Text Display while CD is selected as the sourcePress %/ Þto move to SEARCH, then Press on Screen SET Press %/ Þto move to PERFORMER, then press onEntering the Disc Information Press %/ Þto move To Search Then press onPress %/ Þto move To GENRE, then Press on Screen Then press on Screen SETFor the MD recorder Up to 32 characters to this User FileEnter the disc title, referring to steps 3 Press Text Display while MD is selected as the sourceCD player Operating JVC’s Audio/Video ComponentsTuner Sound control section AmplifierDVD player Cassette deckMD recorder Problem Possible Cause Solution TroubleshootingAM MW/LW tuner SpecificationsAmplifier FM tuner IHFEN, GE, FR, NL, SP, IT 0299JTMMDWJEM

RX-668RBK specifications

The JVC RX-668RBK is a commendable addition to the world of home audio receivers, delivering a blend of impressive features and robust sound performance ideal for both casual listeners and audiophiles alike. This 5.1-channel AV receiver stands as a testament to JVC's commitment to quality and innovation in home entertainment systems.

One of the standout features of the RX-668RBK is its power output. Capable of delivering up to 100 watts per channel, the receiver ensures that users can enjoy clear, dynamic sound at any volume level. The receiver supports a range of audio formats, including Dolby Digital and DTS, which provide an immersive experience during movie nights or while enjoying music. This multi-channel setup allows for true surround sound, transporting listeners straight into the action.

The RX-668RBK is equipped with a sophisticated digital signal processing technology that enhances audio quality across different types of content. The built-in equalizer function offers users the flexibility to customize their sound preferences, allowing for adjustments based on the specifics of the room and the type of media being played. Whether you are watching a fast-paced action film or listening to your favorite album, the receiver adapts seamlessly to deliver optimal sound performance.

Connectivity options are plentiful, as the RX-668RBK features multiple HDMI inputs, enabling users to connect a variety of sources, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also includes optical and coaxial digital inputs, as well as analog audio inputs, ensuring compatibility with both modern and legacy devices. Additionally, the front USB input allows for easy connectivity to USB sources, making it simple to play digital music files.

The user interface of the JVC RX-668RBK is designed for convenience, featuring an intuitive on-screen display that simplifies setup and navigation. The remote control enhances this ease of use, allowing users to manage their audio settings and select input sources from the comfort of their couch.

Overall, the JVC RX-668RBK stands out for its robust feature set, superior sound processing technologies, and versatile connectivity options. It is a reliable choice for anyone looking to enhance their home audio experience, creating a perfect blend of convenience, quality, and exceptional performance.
Top Page Image Contents