JVC RX-668RBK manual Video component connections, TV or Monitor, DVD player, Input, Output

Page 9

Video component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack.

If DVD player and TV have S-video (Y/C-separation) terminals, connect them using S-video cables (not supplied). Connecting these video components through the S-video input/output terminals will give you better picture playback quality.

IMPORTANT:

This receiver is equipped with both the composite video and S-video input terminals for the DVD player connection.

DVD player

• When you connect the DVD player with stereo output jacks:

DVD player

DVD

 ı ‚

English

You do not have to connect both the composite video and S-video terminals.

However, remember that the video signals from the composite video input terminal are output only through the composite video output terminals, while the ones from the S-video input terminal are output only through the S-video output terminal.

Therefore, if your DVD player is connected to the receiver only through the S-video input terminal, you cannot record the picture from the DVD player on the VCR.

In addition, if the TV and the DVD player are connected to the receiver through the different video terminals, you cannot view the playback picture from the DVD player on the TV.

TV (as the monitor)

DVDDVD

FRONT CENTER REAR

L

LEFT

R

RIGHT

SUBWOOFER

To front left/right channel audio output (or to audio mixed output if necessary)

ıTo composite video output ‚ To S-video output (for better playback picture quality)

VIDEO

 

 

VIDEO

OUT

IN

MONITOR

OUT

(REC)

(PLAY)

 

 

VCR

S-VIDEO

 

 

OUT

IN

 

(REC)

(PLAY)

LEFT

 

 

 

 

RIGHT

TV (or Monitor)

DVD VIDEO

VIDEO

MONITOR

OUT

IN

OUT

(REC)

(PLAY)

 

 

VCR

S-VIDEO

 

 

OUT

IN

 

(REC)

(PLAY)

 

LEFT

To composite video input

 

•When you connect the DVD player with its analog discrete output

(5.1 CH reproduction) jacks:

DVD player

DVD

 ı ‚ º ä ì

RIGHT

To S-video input

AUDIO(when the DVD player is connected using the S-video terminal)

Note:

Use the video components of the PAL- or multi- color system.

VCR

DVD

VIDEO

VIDEO

MONITOR

OUT

IN

OUT

(REC)

(PLAY)

 

 

VCR

S-VIDEO

 

 

OUT

IN

 

(REC)

(PLAY)

LEFT

 

 

RIGHT

AUDIO

DVD

DVD

VIDEO

 

 

 

 

FRONT CENTER

REAR

 

 

 

 

 

 

 

VIDEO

L

LEFT

 

 

MONITOR

 

 

 

 

 

OUT

IN

 

 

OUT

R

 

(REC)

(PLAY)

 

RIGHT

 

VCR

 

 

 

S-VIDEO

 

 

 

 

 

 

 

SUBWOOFER

 

OUT

IN

 

 

 

(REC)

(PLAY)

 

LEFT

RIGHT

To front left/right channel audio output ı To center channel audio output

‚ To subwoofer audio output º To composite video output

ä To S-video output (for better playback picture quality) ì To rear left/right channel audio output

To audio/video

VHS

To audio/video

 

input

VCR

output

 

 

6

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RX-668RBK Per I’ltalia Español Italiano Table of Contents Parts Identification Remote ControlFront Panel To use the Cursor control buttons w on the front panelConnecting the FM and AM MW/LW Antennas Before InstallationChecking the Supplied Accessories Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers Connecting the rear and center speakersConnecting Audio/Video Components Connecting the subwoofer speakerAudio component connections TV or Monitor Video component connectionsDVD player InputPutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet Replace the coverFrom the remote control Turning the Power On and Off StandbyBasic Operations On the front panelSelecting the Front Speakers Muting the SoundRecording a Source Adjusting the Front Speaker Output Balance Attenuating the Input SignalAdjusting the Tone Reinforcing the BassSetting Center and Rear Speakers for DSP Modes Basic SettingsPress Setting so that the cursor Changing the Source NameUsing the Sleep Timer Adjust the sound using the functions listed abovePress ONE Touch Operation Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Using the RDS Radio Data System to Receive FM Stations When an FM stereo broadcast is hard to receive or noisyWhat Information Can RDS Signals Provide? Searching for a Program by PTY Codes To search for a program using the PTY codesPress PTY Search while Listening to an FM stationSwitching to a Broadcast Program of Your Choice Temporarily Press TA/NEWS/INFO untilProgram type you want appears on Display 3D-PHONIC modes Using the DSP ModesSurround Modes Dolby SurroundFront Available DSP Modes According to the Speaker ArrangementRear Rear SpeakerAdjusting DAP Modes Adjusting the 3D-PHONIC ModesUntil the mode PRO Logic Or Theater appears on Display Press Rearl / + to adjust the rear speaker output levelOutput balance Rear speaker output level from 10 to +10To cancel the DSP mode Press Surround repeatedly Until the DSP mode you wantActivating the DSP Modes Select and play a sound sourceActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeUsing the On-Screen Menus Press @/ #to turn To Bass BoostBass Boost function On or OFFPress %/ Þto move to SETTING, then press @/ # Press %/ Þ/ @/ #to adjust the tone as you wantPress % / Þto move to Surround LEVEL, then press @/ # Press %/ Þto move to Tone CONTROL, then press @/ #Storing the Preset Stations Also see Press %/ Þto move to Preset MEMORY, then press @/ #Press %/ Þto move To Tuner CONTROL, then Press @/ # Press %/ Þto move to RDS INFORMATION, then press @/ #Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Automatic Source SelectionCD player MD recorder Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Search Only for CD PlayerShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Press on Screen Exit againPress %/ Þto move to SEARCH, then Press on Screen SET Press Text Display while CD is selected as the sourcePress %/ Þto move to PERFORMER, then press on Press on Screen SET againPress %/ Þto move To GENRE, then Press on Screen Press %/ Þto move To Search Then press onThen press on Screen SET Entering the Disc InformationEnter the disc title, referring to steps 3 Up to 32 characters to this User FilePress Text Display while MD is selected as the source For the MD recorderTuner Operating JVC’s Audio/Video ComponentsSound control section Amplifier CD playerCassette deck MD recorderDVD player Problem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF AM MW/LW tunerEN, GE, FR, NL, SP, IT 0299JTMMDWJEM

RX-668RBK specifications

The JVC RX-668RBK is a commendable addition to the world of home audio receivers, delivering a blend of impressive features and robust sound performance ideal for both casual listeners and audiophiles alike. This 5.1-channel AV receiver stands as a testament to JVC's commitment to quality and innovation in home entertainment systems.

One of the standout features of the RX-668RBK is its power output. Capable of delivering up to 100 watts per channel, the receiver ensures that users can enjoy clear, dynamic sound at any volume level. The receiver supports a range of audio formats, including Dolby Digital and DTS, which provide an immersive experience during movie nights or while enjoying music. This multi-channel setup allows for true surround sound, transporting listeners straight into the action.

The RX-668RBK is equipped with a sophisticated digital signal processing technology that enhances audio quality across different types of content. The built-in equalizer function offers users the flexibility to customize their sound preferences, allowing for adjustments based on the specifics of the room and the type of media being played. Whether you are watching a fast-paced action film or listening to your favorite album, the receiver adapts seamlessly to deliver optimal sound performance.

Connectivity options are plentiful, as the RX-668RBK features multiple HDMI inputs, enabling users to connect a variety of sources, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also includes optical and coaxial digital inputs, as well as analog audio inputs, ensuring compatibility with both modern and legacy devices. Additionally, the front USB input allows for easy connectivity to USB sources, making it simple to play digital music files.

The user interface of the JVC RX-668RBK is designed for convenience, featuring an intuitive on-screen display that simplifies setup and navigation. The remote control enhances this ease of use, allowing users to manage their audio settings and select input sources from the comfort of their couch.

Overall, the JVC RX-668RBK stands out for its robust feature set, superior sound processing technologies, and versatile connectivity options. It is a reliable choice for anyone looking to enhance their home audio experience, creating a perfect blend of convenience, quality, and exceptional performance.
Top Page Image Contents