|
| Assembly | |
12 | Upper Shock Rod | 13 | |
|
| ||
|
|
| End of Upper |
| Upper Hole |
| Shock Rod |
|
|
| |
| See |
| .437 Cap Nut |
|
|
| |
| Inset |
|
|
|
|
| .437 Cap Nut |
|
|
| .437" |
|
| Right Side View | Left Side View |
|
|
| |
|
| • Slide the upper shock | • Fit a .437 cap nut on the other end of the upper shock rod. |
|
| rod through the upper | |
|
| • Tap the cap nut with a hammer to secure the cap nut on | |
|
| hole in the vehicle frame, | |
|
| the upper shock rod. Pull on the cap nut to be sure it | |
|
| through the upper portion | |
|
| is secure. | |
|
| of the monoshock and out | |
|
| Hint: You may need the help of another adult to support | |
|
| through the other side of | |
|
| the vehicle frame. | the other end of the upper shock rod. |
|
| Hint: You may want to |
|
| Upper | hold the monoshock in | 14 |
| Shock | position to fit the upper | |
| Rod | shock rod through it. |
|
| Top View |
|
|
|
|
| Right Rear |
|
|
| Fender |
|
|
| * |
|
|
| Right Side View |
|
|
| • Place the right rear fender on the side of the vehicle |
|
|
| frame, as shown. |
|
|
| • Insert four #8 x 3/4" screws through the right rear fender |
|
|
| and into the vehicle frame. |
|
|
| *Note: The most forward screw should insert into the |
|
|
| fender, through the footboard and then into the |
|
|
| vehicle frame. |
|
|
| • Tighten the screws with a Phillips screwdriver. |
|
|
| Do not |
|
| 13 | • Repeat this procedure to to attach the left rear fender to |
|
| the vehicle frame. |