JVC RX-630RBK manual About the One Touch Operation, Using the One Touch Operation

Page 23

One Touch Operation

This receiver can memorize the optimum sound settings for each playing source.

About the One Touch Operation

JVC’s One Touch Operation function is used to assign and store different sound settings for each different playing source. By using this function, you don’t have to change the settings every time you change the source. The stored settings for the newly selected source are automatically recalled.

The following can be stored for each source:

Volume level (see page 13)

Balance (see page 15)

Loudness (see page 15)

SEA modes (see page 26)

Surround mode settings (see page 28)

Note:

If the source is FM or AM (MW/LW), the One Touch Operation function works only when the preset channels from 1 — 20 are tuned in. You can assign a different setting for each preset channel.

Using the One Touch Operation

To store the sound settings

ONE TOUCH1. Press ONE TOUCH OPERATION.

OPERATION

The ONE TOUCH OPERATION lamp lights up, then the previously memorized settings are recalled and appear on the display in turn.

2. Adjust the sound using the functions listed above.

English

Front panel

The newly adjusted settings are memorized.

 

To recall the sound settings

 

With the ONE TOUCH OPERATION lamp lit, the settings for the currently selected source is recalled, and

ONE TOUCH

appears on the display when the source is selected.

 

OPERATION

 

 

To cancel the One Touch Operation function

Remote Control

Press ONE TOUCH OPERATION so that the lamp goes off.

(Even though the One Touch Operation function is canceled, the recalled sound effects remain active.)

 

Page 18

Image 23
Contents RX-630RBK Per I’ltalia English Deutsch Français Nederlands Español Italiano Voorzichtig -- Power en STANDBY/ON RX-630RBK Table of Contents Getting Started Before InstallationChecking the Supplied Accessories Front Panel Switches, Buttons and ControlsFront Panel Remote Control Remote ControlFM Antenna Connections Connecting the FM and AM MW/LW AntennasUsing the Supplied FM Antenna Using the Standard Type Connector Not SuppliedConnecting the front speakers Connecting the SpeakersClose the terminal Connecting the rear and center speakersConnecting the subwoofer speaker Open the terminalAbout the speaker impedance of the speakers Case 1 When you connect only front speakersCase 3 When you connect front and rear speakers Case 2 When you connect front speakers and a center speakerIf your audio components have a Compu LINK-3 terminal Connecting Audio/Video ComponentsAudio component connections Audio Components Video ComponentsTo shut off the power completely Connecting the Power CordPlug the power cord into an AC outlet Press Power to set it in the on positionR6PSUM-3/AA 15F Putting Batteries in the Remote ControlSelecting the Source to Play Turning the Power On and OffBasic Operations On the front panel only Adjusting the VolumeSelecting the Front Speakers Recording a Source Listening with HeadphonesMuting the Sound Function Basic SettingsAdjusting the Front Speaker Output Balance Listening at Low Volume LoudnessFrom the remote control Press Sleep repeatedly Using the Sleep TimerWhen the shut-off time comes To cancel the Sleep TimerSmall Selecting the Center Speaker SizeLarge Small LargeAbout the One Touch Operation Using the One Touch OperationOne Touch Operation Receiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning Storing the preset stationsMono Selecting the FM Reception ModeTuning in a preset station AutoAvailable characters Assigning Names to Preset StationsWhen a character you want appears, press Control #or @ Press Control % / Þto select a characterPTY Using the RDS Radio Data System to Receive FM StationsWhat Information Can RDS Signals Provide? Searching for a Program by PTY Codes Info AlarmNews AffairsCase Switching to a Broadcast Program of Your Choice TemporarilyTA NEWS/INFO TA/INFO TA/NEWS News Info TA/NEWS/INFO Rock Musical Movie Country SEA OFF Usermode Jazz Using the SEA ModesSelecting Your Favorite SEA Mode To erase a stored adjustment Creating Your Own SEA ModeAdjust the SEA frequency and its level To recall your own SEA adjustmentPrologic 3CHLOGIC Hall Surr OFF Using the Surround ProcessorUsing JVC’s Hall Surround What is surround?Press Rear +/- to adjust the rear speaker output level Delay 1 Delay Delay 4 DelayDelay Press Mode repeatedly until Hall appears on the displaySpeaker Arrangements for Dolby Surround When you have added rear speakers without a center speakerWhen you have added a center speaker without rear speakers Wide Normal Phantom Preparing for Dolby SurroundSOFT2 SOFT1 Flat SHARP1 SHARP2 DelayIf necessary, adjust the speaker output level as follows Press Test again to stop the test tone Press Test to start checking the speaker output balanceUsing Dolby Surround Synchronized Recording Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionTo operate JVC’s audio components using this remote control Enter button after selecting a channel number Problem Possible Cause Solution TroubleshootingVideo SpecificationsAmplifier General FM tuner IHFAM MW/LW tuner EN, GE, FR, NL, SP, IT 0697OFYOTKJEM

RX-630RBK specifications

The JVC RX-630RBK is a versatile and powerful stereo receiver designed to enhance your home audio experience. With a sleek and modern design, it fits seamlessly into any entertainment setup while providing robust sound quality and an array of features.

One of the main highlights of the RX-630RBK is its solid power output, delivering 100 watts per channel across a wide frequency range. This ensures that whether you're listening to music, watching movies, or playing video games, the audio experience is both rich and immersive. The receiver also supports both stereo and multi-channel formats, making it an excellent choice for various audio sources.

The RX-630RBK incorporates advanced technologies to optimize sound performance. It features a built-in FM/AM tuner with 30 preset stations, allowing you to easily access your favorite radio channels. The receiver also has a dedicated phono input, enabling audiophiles to connect their turntables and enjoy vinyl records with clarity and depth. Additionally, it supports digital audio inputs, including optical and coaxial connections, ensuring compatibility with modern devices.

User-friendly controls and a remote make it easy to navigate through various settings and audio sources. The LCD display provides clear information about current settings, making adjustments straightforward. The receiver is equipped with multiple audio inputs, including auxiliary and USB ports, allowing you to connect smartphones, tablets, or other audio sources effortlessly.

Another notable feature of the JVC RX-630RBK is its adjustable equalizer settings. This allows users to fine-tune the audio output to suit their preferences or the acoustics of their room. Bass and treble adjustments ensure that you can enjoy music and other audio content exactly as you like it.

The RX-630RBK also prioritizes safety, featuring built-in protection circuits to prevent overheating and overload, ensuring longevity and reliability.

In summary, the JVC RX-630RBK is a powerful and feature-rich stereo receiver offering exceptional sound quality and versatile connectivity options. Its combination of advanced technology, user-friendly controls, and thoughtful features make it an ideal choice for audio enthusiasts looking to elevate their listening experience at home. With the RX-630RBK, enjoying high-fidelity sound has never been easier or more accessible.