JVC RX-665VBK If necessary, adjust the speaker output balance as follows, Delay 1 Delay 2 Delay

Page 38

Using the Surround Processor

English

9.If necessary, adjust the speaker output balance as follows:

•To adjust the rear speaker output level, press Control 5/ ∞ until “– REAR +” appears on the display, then press Control 2 / 3.

•To adjust the center speaker output level, press Control 5 / ∞ until “–CENTER+” appears on the display, then press Control 2/ 3.

10.Press Control 5/ ∞ until “TEST” appears on the display, then press Control 2 / 3twice to stop the test tone.

If you have selected JVC Theater Surround, go to the following steps.

11.Press Control 5/ ∞ until “–EFFECT+” appears on the display.

12.Press Control 2 / 3 to adjust the effect level.

Each time you press the button, the effect level changes as follows:

EFFECT 1EFFECT 2 EFFECT 3

EFFECT 5

EFFECT 4

As the number increases, the effect of the Theater Surround becomes stronger.

From the remote control:

If you have already set the center speaker size following the procedure described on page 19, you can use the remote control for surround mode preparation.

Notes:

•The sound levels of the left and right rear speakers will be the same.

•You cannot set the sound level of the rear speakers when you have selected “3CHLOGIC.”

•You cannot set the sound level of the center speaker when you select “PHANTOM” for the center mode.

Note:

When you have selected “PROLOGIC” or “3CHLOGIC,” you cannot select the effect level.

1.Press SOUND CONTROL so that 10 keys work for adjusting the sound.

2.Press SURROUND until the Surround mode you want appears on the display.

The previous mode is recalled (with its previous settings) and is shown on the display.

The indicator for that mode also lights up on the display. Each time you press the button, the Surround modes change as follows:

THEATER 3CHLOGIC PROLOGIC

OFF

3.Press DELAY to adjust the delay time of the rear speaker output.

Each time you press the button, the delay time changes as follows:

DELAY 1 DELAY 2 DELAY 3

SOUND

CONTROL

SURROUND

3

DELAY

5

Note:

When you have selected “3CHLOGIC” or “THEATER,” you cannot adjust the delay time.

35

Page 37 Page 39
Image 38
Page 37 Page 39
Contents RX-665VBK Mises en garde, précautions et indications diverses For actual setting procedures, see pages 26 to Niveau d’effetTable of Contents Parts Identification Remote Control$ Power buttons CATV/SAT, TV, VCR Audio 14, 45, 46 Front PanelEasy Set Up & Operations For Reproducing Surround Sound with your VCRTurn on the power Easy Set Up & Operations For Reproducing DVD Multi Playback with your DVD playerMake further Locations Getting StartedGeneral Handling the receiverAM Antenna Connections Connecting the FM and AM AntennasFM Antenna Connections Getting Started Connecting the front speakersConnecting the Speakers Connect the front speakers to the Front Speakers terminalsConnecting the rear and center speakers Connecting the subwooferVideo component connections Connecting Audio/Video ComponentsAudio component connections If your audio components have a Compu LINK-3 terminalDVD player connection If your audio components have an AV Compu Link terminalConnecting the Power Cord Putting Batteries in the Remote ControlBasic Operations From the remote controlTurning the Power On and Off On the front panelOn the front panel only From the remote control onlyBasic Operations Recording a Source Listening with HeadphonesTo listen with only headphones Listening at Low Volume Loudness Basic SettingsAdjusting the Front Speaker Output Balance Using the Sleep TimerReceiver turns off automatically When the shut-off time comesTo cancel the Sleep Timer Small Basic SettingsSelecting the Center Speaker Size LargeTo cancel the One Touch Operation function To store the sound settingsTo recall the sound settings One Touch OperationTo store the preset stations Tuning in Stations ManuallyUsing Preset Tuning Receiving Radio BroadcastsPress 10 keys to select a preset channel number To cancel a stored preset stationTo tune in a preset station Selecting the FM Reception Mode Receiving Radio BroadcastsTo cancel the preset SEA mode Using the Preset SEA ModesSelecting Your Favorite SEA Mode Using the Preset SEA Modes Press SEA Preset to select the effect levelOn the DAP mode Using the Surround ProcessorOn JVC 3D-PHONIC mode On surround modes3DACTION Using the Surround ProcessorUsing JVC 3D-PHONIC Modes 3DTHEATRMark Press Control 2/ 3to adjust the effect levelTo cancel the 3D-PHONIC mode Press Effect to select the effect levelHall Using the DAP ModesPavilion Press Rear L +/- to adjust the rear speaker Output level To cancel the DAP modeSelect OFF in step DAP indicator goes off from the display Effect Speaker Arrangements for Surround Modes Select Prologic or Theater Select Phantom for center modeSelect 3CHLOGIC Select Normal or Wide for center mode This casePrologic Preparing for Surround ModesPress Surround so that the Control TheaterWide Press Control 2/ 3to select the center modeDelay NormalIf necessary, adjust the speaker output balance as follows Delay 1 Delay 2 DelayPress Test again to stop the test tone Press Effect to adjust the effect levelPress Test to start checking the speaker output balance Previous mode is recalled with its previous Using Surround ModesTo cancel Surround mode From the front panelActivating the DVD Multi playback Using the DVD Multi Playback ModeSpeaker arrangements for DVD Multi playback Using the DVD Multi Playback Mode Automatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingDo not connect to the TV terminal AV Compu Link Remote Control SystemConnect to the terminal indicated Illustration See page 44 for details Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlayStarts playing To operate JVC audio components using this remote controlOperating Other Components Starts playbackFollowing operations on the VCR To operate JVC video components using this remote controlAfter pressing VCR, you can perform Return TV Volume +TV/VIDEO Release CATV/SAT in the Power section Press and hold CATV/SAT in the Power sectionEnter manufacturer’s code two digits using CATV/SAT in the PowerTry to operate your VCR by pressing VCR Power Press and hold VCR in the Power sectionRelease VCR in the Power section Operating Other Manufacturers’ Video EquipmentTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierGeneral FM tuner IHFAM tuner EN, FR

RX-665VBK specifications

The JVC RX-665VBK is a versatile and feature-rich audio receiver that has earned recognition for its balanced performance and modern connectivity options. Designed for home theater enthusiasts and music lovers alike, this receiver delivers a powerful audio experience while seamlessly integrating into your existing entertainment setup.

One of the standout features of the RX-665VBK is its robust amplification system. With a total output power of 100 watts per channel, it provides ample power to drive a wide range of speakers, making it suitable for various room sizes. The receiver employs direct energy technology, which enhances efficiency and minimizes distortion, resulting in clear and dynamic sound reproduction across all frequencies.

Connectivity is a strong point for the RX-665VBK, as it comes equipped with multiple HDMI inputs. This allows users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, all while supporting high-definition video formats. Additionally, the receiver features a dedicated HDMI out for easy connection to your television, ensuring that you can enjoy high-quality audio-visual content without complicating your setup.

Incorporating advanced digital processing technologies, the RX-665VBK supports Dolby Digital and DTS surround sound formats. This enables users to experience immersive audio that complements high-definition video, making it perfect for movie nights and gaming sessions. The receiver also includes a built-in AM/FM tuner, allowing you to listen to your favorite radio stations with ease.

User convenience is further enhanced by the inclusion of an intuitive on-screen display. This feature simplifies the setup process, guiding users through the configuration of speaker settings and audio adjustments. For added flexibility, the RX-665VBK supports multiple audio input options, including USB and auxiliary inputs, enabling seamless playback from various sources.

The JVC RX-665VBK is not just about audio performance; its sleek and modern design ensures it fits well in any living space. With a user-friendly remote control, managing your audio experience is simple and straightforward.

In conclusion, the JVC RX-665VBK stands as a commendable choice for anyone seeking an affordable yet powerful audio receiver. With its combination of impressive amplification, advanced technologies, and modern connectivity options, it caters to the diverse needs of home entertainment enthusiasts, making it a valuable addition to any audio setup.
Top Page Image Contents