JVC RX-665VBK Using the DVD Multi Playback Mode, Speaker arrangements for DVD Multi playback

Page 41

Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode (5.1 CH) of the DVD player.

Before playing back a DVD, refer also to the manual supplied with the DVD player.

English

Speaker arrangements for DVD MULTI playback

The following illustration show how to obtain the optimum sound environment for the DVD MULTI playback mode. Try to find the speaker direction and location to create the optimum sound field.

Left front

Sub-

TV

Right front

woofer

speaker

 

speaker

 

Center

 

 

speaker

 

Left

Right

rear

rear

speaker

speaker

Note:

You can place the subwoofer anywhere around you.

Activating the DVD MULTI playback

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player.

Once you made adjustments, the receiver memorizes the adjustments until you change them. You also need to set the DVD player to the analog discrete output mode.

On the front panel:

1.Press DVD MULTI until “DVD MULTI” appears on the display.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

Refer to the manual supplied with the DVD player.

If you want to make any adjustment, go to the following steps.

3.Press ADJUST so that the Control 5 / ∞/ 2 / 3 buttons work for adjusting the DVD MULTI playback mode.

The lamp above the button lights up.

4.Press Control 5/ ∞ until “–CENTER+” appears on the display.

5.Press Control 2/ 3 to adjust the center speaker output level.

•Pressing Control 2decreases the output level up to –10 dB.

•Pressing Control 3increases the output level up to +10 dB.

DVD MULTI

ADJUST

Note:

When you select “DVD MULTI” as the source to play, the Surround Processor modes are canceled temporarily.

38

Page 40 Page 42
Image 41
Page 40 Page 42
Contents RX-665VBK Mises en garde, précautions et indications diverses Niveau d’effet For actual setting procedures, see pages 26 toTable of Contents $ Power buttons CATV/SAT, TV, VCR Audio 14, 45, 46 Remote ControlParts Identification Front PanelFor Reproducing Surround Sound with your VCR Easy Set Up & OperationsTurn on the power For Reproducing DVD Multi Playback with your DVD player Easy Set Up & OperationsMake further General Getting StartedLocations Handling the receiverAM Antenna Connections Connecting the FM and AM AntennasFM Antenna Connections Connecting the Speakers Connecting the front speakersGetting Started Connect the front speakers to the Front Speakers terminalsConnecting the subwoofer Connecting the rear and center speakersAudio component connections Connecting Audio/Video ComponentsVideo component connections If your audio components have a Compu LINK-3 terminalIf your audio components have an AV Compu Link terminal DVD player connectionPutting Batteries in the Remote Control Connecting the Power CordTurning the Power On and Off From the remote controlBasic Operations On the front panelOn the front panel only From the remote control onlyBasic Operations Recording a Source Listening with HeadphonesTo listen with only headphones Adjusting the Front Speaker Output Balance Basic SettingsListening at Low Volume Loudness Using the Sleep TimerReceiver turns off automatically When the shut-off time comesTo cancel the Sleep Timer Selecting the Center Speaker Size Basic SettingsSmall LargeTo recall the sound settings To store the sound settingsTo cancel the One Touch Operation function One Touch OperationUsing Preset Tuning Tuning in Stations ManuallyTo store the preset stations Receiving Radio BroadcastsPress 10 keys to select a preset channel number To cancel a stored preset stationTo tune in a preset station Receiving Radio Broadcasts Selecting the FM Reception ModeTo cancel the preset SEA mode Using the Preset SEA ModesSelecting Your Favorite SEA Mode Press SEA Preset to select the effect level Using the Preset SEA ModesOn JVC 3D-PHONIC mode Using the Surround ProcessorOn the DAP mode On surround modesUsing JVC 3D-PHONIC Modes Using the Surround Processor3DACTION 3DTHEATRTo cancel the 3D-PHONIC mode Press Control 2/ 3to adjust the effect levelMark Press Effect to select the effect levelHall Using the DAP ModesPavilion Press Rear L +/- to adjust the rear speaker Output level To cancel the DAP modeSelect OFF in step DAP indicator goes off from the display Effect Select 3CHLOGIC Select Normal or Wide for center mode Select Prologic or Theater Select Phantom for center modeSpeaker Arrangements for Surround Modes This casePress Surround so that the Control Preparing for Surround ModesPrologic TheaterDelay Press Control 2/ 3to select the center modeWide NormalDelay 1 Delay 2 Delay If necessary, adjust the speaker output balance as followsPress Test again to stop the test tone Press Effect to adjust the effect levelPress Test to start checking the speaker output balance To cancel Surround mode Using Surround ModesPrevious mode is recalled with its previous From the front panelActivating the DVD Multi playback Using the DVD Multi Playback ModeSpeaker arrangements for DVD Multi playback Using the DVD Multi Playback Mode Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemAutomatic Source Selection Synchronized RecordingDo not connect to the TV terminal AV Compu Link Remote Control SystemConnect to the terminal indicated Illustration Automatic Power On/Off Automatic Selection of TV’s Input ModeSee page 44 for details One-Touch Video PlayOperating Other Components To operate JVC audio components using this remote controlStarts playing Starts playbackFollowing operations on the VCR To operate JVC video components using this remote controlAfter pressing VCR, you can perform Return TV Volume +TV/VIDEO Enter manufacturer’s code two digits using Press and hold CATV/SAT in the Power sectionRelease CATV/SAT in the Power section CATV/SAT in the PowerRelease VCR in the Power section Press and hold VCR in the Power sectionTry to operate your VCR by pressing VCR Power Operating Other Manufacturers’ Video EquipmentProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsGeneral FM tuner IHFAM tuner EN, FR

RX-665VBK specifications

The JVC RX-665VBK is a versatile and feature-rich audio receiver that has earned recognition for its balanced performance and modern connectivity options. Designed for home theater enthusiasts and music lovers alike, this receiver delivers a powerful audio experience while seamlessly integrating into your existing entertainment setup.

One of the standout features of the RX-665VBK is its robust amplification system. With a total output power of 100 watts per channel, it provides ample power to drive a wide range of speakers, making it suitable for various room sizes. The receiver employs direct energy technology, which enhances efficiency and minimizes distortion, resulting in clear and dynamic sound reproduction across all frequencies.

Connectivity is a strong point for the RX-665VBK, as it comes equipped with multiple HDMI inputs. This allows users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, all while supporting high-definition video formats. Additionally, the receiver features a dedicated HDMI out for easy connection to your television, ensuring that you can enjoy high-quality audio-visual content without complicating your setup.

Incorporating advanced digital processing technologies, the RX-665VBK supports Dolby Digital and DTS surround sound formats. This enables users to experience immersive audio that complements high-definition video, making it perfect for movie nights and gaming sessions. The receiver also includes a built-in AM/FM tuner, allowing you to listen to your favorite radio stations with ease.

User convenience is further enhanced by the inclusion of an intuitive on-screen display. This feature simplifies the setup process, guiding users through the configuration of speaker settings and audio adjustments. For added flexibility, the RX-665VBK supports multiple audio input options, including USB and auxiliary inputs, enabling seamless playback from various sources.

The JVC RX-665VBK is not just about audio performance; its sleek and modern design ensures it fits well in any living space. With a user-friendly remote control, managing your audio experience is simple and straightforward.

In conclusion, the JVC RX-665VBK stands as a commendable choice for anyone seeking an affordable yet powerful audio receiver. With its combination of impressive amplification, advanced technologies, and modern connectivity options, it caters to the diverse needs of home entertainment enthusiasts, making it a valuable addition to any audio setup.
Top Page Image Contents