JVC RX-6010VBK Listening Only with Headphones, Muting the Sound, Press Muting to mute the sound

Page 12

English

Selecting different sources for picture and sound

You can watch picture from a video component while listening to sound from another component. Press one of the audio source selecting buttons (CD, TAPE/CDR, FM/AM), while viewing the picture from a video component such as the VCR or DVD player, etc.

On the front panel:

CD

TAPE/CDR

FM/AM

 

 

 

SOURCE NAME

From the remote control:

CD

TAPE/CDR

FM/AM

Adjusting the Volume

Listening Only with Headphones

You must turn off speakers when you listen with headphones.

1.Connect a pair of headphones to the PHONES jack on the front panel.

2.Press SPEAKERS ON/OFF so that the SPK indicator disappears from the display.

This cancels the DSP mode currently selected, and activates the HEADPHONE mode (see below).

•“HEADPHONE” appears and H. PHONE indicator lights up on the display.

HEADPHONE mode:

This mode can reproduce the LFE channel signals, mixing them with the front channel signals. So you will not miss the subwoofer sounds even if you listen to a source using the headphones.

Notes:

•While in the HEADPHONE mode, you cannot use any DSP modes (see page 18.)

•Activating the speaker cancels the HEADPHONE mode and turns on the DSP mode previously selected.

CAUTION:

Be sure to turn down the volume before connecting or putting on headphones, as high volume can damage both the headphones and

On the front panel:

To increase the volume, turn MASTER

VOLUME clockwise.

To decrease the volume, turn it

counterclockwise.

•When you turn MASTER VOLUME rapidly, the volume level also changes rapidly.

•When you turn MASTER VOLUME slowly, the volume level also changes slowly.

From the remote control:

To increase the volume, press VOLUME +. To decrease the volume, press VOLUME –.

CAUTION:

MASTER VOLUME

+

VOLUME

–

your hearing.

Muting the Sound

From the remote control ONLY:

Press MUTING to mute the sound

MUTING

 

through all speakers and headphones

 

connected.

 

“MUTING” appears on the display and the volume turns off (the volume level indicator goes off).

To restore the sound, press MUTING again so that “OFF” appears on the display.

Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

Note:

The volume level can be adjusted within the range of “0” (minimum) to “80” (maximum).

•Turning MASTER VOLUME on the front panel or pressing VOLUME +/– on the remote control also restores the sound.

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents RX-6010VBK Mises en garde, précautions et indications diverses English Français Table of Contents Remote Control Parts IdentificationFront Panel Before Installation Checking the Supplied AccessoriesConnecting the FM and AM Antennas Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers Connecting the rear and center speakersConnecting Audio/Video Components Connecting the subwoofer speakerAnalog connections Audio component connectionsVideo component connections DVD playerTo audio Connecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet Digital connectionsTurning the Power On and Off Standby From the remote controlSignal and speaker indicators on the display Basic OperationsListening Only with Headphones Through all speakers and headphones ConnectedMuting the Sound Press Muting to mute the soundAdjusting the Subwoofer Output Level Adjusting the ToneAttenuating the Input Signal Basic Settings Recording a Source Setting the Subwoofer InformationAdjusting the Front Speaker Output Balance Changing the Source NameSetting the Speakers for the DSP Modes Center Delay appears on DisplayRear Delay appears on Display To select the delay time of the rear speaker outputCrossover FRQ Crossover Frequency appears on the display LFE ATT Low Frequency Effect Attenuator appears on DisplayTo select the low frequency effect attenuator level Digital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeStoring the Basic Settings Adjustments Using the Sleep TimerChange the input mode Press Sleep repeatedlyTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Using the DSP Modes What are the DSP Modes?Surround modes Available DSP modes according to the input mode Reproducing the Sound FieldDAP modes Early reflections Behind Direct soundsBy pressing DSP Mode By pressing Surround Mode Available DSP Modes According to the Speaker ArrangementAvailable DSP modes FrontAdjusting the Surround Modes Adjust the effect level JVC Theater Surround adjustmentsLevel you want Adjusting the DAP Modes Press DSP Mode repeatedly untilAdjust the rear speaker output levels Press Sound Adjust the rear speaker outputMode you want appears on the display Press Surround ModeActivating the DSP Modes Press Surround ON/OFFCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverPress the play 3 button on the CD player Automatic Source SelectionOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierOperating Video Components CD changerCassette deck CD recorderTroubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF AM tunerGeneral EN, FR 0301NHMMDWJEIN

RX-6010VBK specifications

The JVC RX-6010VBK is a standout receiver that combines advanced audio technologies with user-friendly features, making it a popular choice for home theater enthusiasts and casual listeners alike. This versatile receiver is designed to deliver outstanding sound performance while providing a host of connectivity options to accommodate various devices.

One of the primary features of the RX-6010VBK is its high powered amplification system, delivering up to 100 watts per channel, which ensures that audio playback remains dynamic and clear, regardless of volume levels. The receiver supports a range of audio formats, including Dolby Digital, DTS, and PCM, enabling it to reproduce surround sound experiences that immerse listeners in their favorite films and music.

The RX-6010VBK is equipped with a sophisticated digital signal processor (DSP) that enhances sound quality by optimizing audio signals for different types of content. This means that whether you're watching an action-packed movie or enjoying a soft ballad, the receiver adjusts the audio output to provide the best possible listening experience.

Connectivity is another highlight of the JVC RX-6010VBK. It features multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. With support for 4K video upscaling, the receiver ensures that users can enjoy high-definition content with stunning clarity and detail. Additionally, the receiver includes composite and component video inputs, ensuring compatibility with older devices.

The user interface of the RX-6010VBK is intuitive and easy to navigate. The front panel features a clear display and straightforward controls, while a remote control is also included, making it convenient to adjust settings from a distance. The receiver's setup process is simplified by an on-screen graphical interface, allowing users to get started quickly.

One of the more advanced technologies included in the RX-6010VBK is its room calibration feature. This technology uses a built-in microphone to analyze the acoustics of your room, automatically adjusting the audio output to compensate for the unique characteristics of the space. This results in a balanced sound that is tailored to your listening environment.

In terms of aesthetics, the JVC RX-6010VBK boasts a sleek black finish that fits well with modern home entertainment systems. Its compact design makes it easy to integrate into any setup without taking up excessive space.

Overall, the JVC RX-6010VBK receiver stands out as an excellent option for anyone looking to elevate their audio experience. Its combination of powerful amplification, advanced processing technologies, and comprehensive connectivity options make it a valuable addition to any home theater setup. Whether you are a casual viewer or a serious audiophile, the RX-6010VBK is sure to deliver the performance you desire.
Top Page Image Contents