JVC RX-6010VBK manual Digital Input Digital in Terminal Setting

SOURCE NAME

Digital Input (DIGITAL IN) Terminal Setting

When you use the digital input terminals, you have to register what components are connected to which terminals (DIGITAL IN 1/2).

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel ONLY:

1. Press SETTING repeatedly until	T SETTING
“DIGITAL IN” appears on the
display.
The display changes to show the current setting.
DIGITAL 2 terminal setting

Selecting the Analog or Digital Input Mode

When you have connected digital source components using both the analog connection (see page 5) and the digital connection methods (see page 7), you need to select the input mode correctly.

On the front panel :

1. Press one of the

source selecting	DVD	VTR	TV SOUND
buttons (DVD, TV	CD	TAPE/CDR	FM/AM

SOUND, CD, or TAPE/CDR)* for

which you want to change the input mode.

Note:

*Among the sources listed above, you can select the digital input only for the sources which you have selected the digital input terminals for. (See “Digital Input (DIGITAL IN) Terminal Setting.”)

English

DIGITAL 1 terminal setting

2. Press CONTROL UP 5/DOWN °	CONTROL
	DOWN UP
to select the appropriate digital
terminal setting.

•Each time you press the button, the display changes to show the following:

1 DVD 2 CD Ò 1 DVD 2 TV Ò 1 DVD 2 CDR Ò

1 CD 2 DVD	Ò 1 CD 2 TV	Ò 1 CD 2 CDR	Ò
1 TV 2 DVD	Ò 1 TV 2 CD	Ò 1 TV 2 CDR	Ò
1 CDR 2 DVD Ò 1 CDR 2 CD Ò 1 CDR 2 TV			Ò
(back to the beginning)

Note:

When shipped from the factory, the DIGITAL IN terminals can be used as the digital input for the following components.

•DIGITAL 1 (coaxial): For DVD player

•DIGITAL 2 (optical): For CD player

2. Press INPUT DIGITAL to select	INPUT DIGITAL
the digital input mode (AUTO).

The DIGITAL AUTO indicator lights up on the display, and the digital signal indicator for the detected signals also light up.*

•When “AUTO” is selected, the receiver automatically detects the incoming signal format.

DIGITAL AUTO SPK

L R

“AUTO” appears for about 4 seconds.

*The followings are the analog/digital signal indicators on the display to indicate what type of the signal comes into the receiver.

DIGITAL AUTO :

ANALOG :

LINEAR PCM :

DIGITAL:

:

Lights up when “AUTO” is selected as the digital input mode.

Lights up when the analog input is selected.

Lights up when Linear PCM signals come in.

Lights up when Dolby Digital signals come in.

Lights up when DTS Digital Surround signals come in.

Continued to the next page.

14