JVC RX-6010VBK manual Getting Started, Before Installation, Checking the Supplied Accessories

Page 6

English

Getting Started

This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.

Before Installation

General

•Be sure your hands are dry.

•Turn the power off to all components.

•Read the manuals supplied with the components you are going to connect.

Locations

•Install the receiver in a location that is level and protected from moisture.

•The temperature around the receiver must be between –5˚C and 35˚C (23˚F and 95˚F).

•Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver.

Handling the receiver

•Do not insert any metal object into the receiver.

•Do not disassemble the receiver or remove screws, covers, or cabinet.

•Do not expose the receiver to rain or moisture.

Checking the Supplied Accessories

Check to be sure you have all of the following items, which are supplied with the receiver.

The number in the parentheses indicates the quantity of the pieces supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

If anything is missing, contact your dealer immediately.

Connecting the FM and AM Antennas

FM Antenna Connections

A

ANTENNA

FM

75

B

ANTENNA

FM

75

 

 

COAXIAL

 

 

COAXIAL

 

AM

 

AM

 

AM

 

AM

 

LOOP

 

EXT

 

LOOP

 

EXT

 

 

 

 

 

 

FM Antenna

ANTENNA Extend the supplied FM antenna horizontally.

FM 75

COAXIAL

AM

Outdoor FM Antenna Cable

LOOP

 

 

AM

 

EXT

A.Using the Supplied FM Antenna

The FM antenna provided can be connected to the FM 75 Ω COAXIAL terminal as temporary measure.

B.Using the Standard Type Connector (Not Supplied)

A standard type connector should be connected to the FM 75 Ω COAXIAL terminal.

Note:

If reception is poor, connect an outdoor antenna.

Before attaching a 75 Ω coaxial cable (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM antenna.

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents RX-6010VBK Mises en garde, précautions et indications diverses English Français Table of Contents Remote Control Parts IdentificationFront Panel Connecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure Connecting the rear and center speakersAnalog connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Audio component connectionsVideo component connections DVD playerTo audio Plug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Digital connectionsSignal and speaker indicators on the display Turning the Power On and Off StandbyFrom the remote control Basic OperationsMuting the Sound Listening Only with HeadphonesThrough all speakers and headphones Connected Press Muting to mute the soundAdjusting the Subwoofer Output Level Adjusting the ToneAttenuating the Input Signal Adjusting the Front Speaker Output Balance Basic SettingsRecording a Source Setting the Subwoofer Information Changing the Source NameRear Delay appears on Display Setting the Speakers for the DSP ModesCenter Delay appears on Display To select the delay time of the rear speaker outputCrossover FRQ Crossover Frequency appears on the display LFE ATT Low Frequency Effect Attenuator appears on DisplayTo select the low frequency effect attenuator level Digital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeChange the input mode Storing the Basic Settings AdjustmentsUsing the Sleep Timer Press Sleep repeatedlyTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Using the DSP Modes What are the DSP Modes?Surround modes DAP modes Available DSP modes according to the input modeReproducing the Sound Field Early reflections Behind Direct soundsAvailable DSP modes By pressing DSP Mode By pressing Surround ModeAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the Surround Modes Adjust the effect level JVC Theater Surround adjustmentsLevel you want Adjust the rear speaker output levels Press Sound Adjusting the DAP ModesPress DSP Mode repeatedly until Adjust the rear speaker outputActivating the DSP Modes Mode you want appears on the displayPress Surround Mode Press Surround ON/OFFPress the play 3 button on the CD player Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierCassette deck Operating Video ComponentsCD changer CD recorderTroubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionFM tuner IHF AM tunerGeneral EN, FR 0301NHMMDWJEIN

RX-6010VBK specifications

The JVC RX-6010VBK is a standout receiver that combines advanced audio technologies with user-friendly features, making it a popular choice for home theater enthusiasts and casual listeners alike. This versatile receiver is designed to deliver outstanding sound performance while providing a host of connectivity options to accommodate various devices.

One of the primary features of the RX-6010VBK is its high powered amplification system, delivering up to 100 watts per channel, which ensures that audio playback remains dynamic and clear, regardless of volume levels. The receiver supports a range of audio formats, including Dolby Digital, DTS, and PCM, enabling it to reproduce surround sound experiences that immerse listeners in their favorite films and music.

The RX-6010VBK is equipped with a sophisticated digital signal processor (DSP) that enhances sound quality by optimizing audio signals for different types of content. This means that whether you're watching an action-packed movie or enjoying a soft ballad, the receiver adjusts the audio output to provide the best possible listening experience.

Connectivity is another highlight of the JVC RX-6010VBK. It features multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. With support for 4K video upscaling, the receiver ensures that users can enjoy high-definition content with stunning clarity and detail. Additionally, the receiver includes composite and component video inputs, ensuring compatibility with older devices.

The user interface of the RX-6010VBK is intuitive and easy to navigate. The front panel features a clear display and straightforward controls, while a remote control is also included, making it convenient to adjust settings from a distance. The receiver's setup process is simplified by an on-screen graphical interface, allowing users to get started quickly.

One of the more advanced technologies included in the RX-6010VBK is its room calibration feature. This technology uses a built-in microphone to analyze the acoustics of your room, automatically adjusting the audio output to compensate for the unique characteristics of the space. This results in a balanced sound that is tailored to your listening environment.

In terms of aesthetics, the JVC RX-6010VBK boasts a sleek black finish that fits well with modern home entertainment systems. Its compact design makes it easy to integrate into any setup without taking up excessive space.

Overall, the JVC RX-6010VBK receiver stands out as an excellent option for anyone looking to elevate their audio experience. Its combination of powerful amplification, advanced processing technologies, and comprehensive connectivity options make it a valuable addition to any home theater setup. Whether you are a casual viewer or a serious audiophile, the RX-6010VBK is sure to deliver the performance you desire.
Top Page Image Contents