JVC RX-6022VSL manual Press Control UP, Adjust the speaker output levels 10 to +10, Tone

Page 24
SURROUND MODE

Creating Realistic Sound Fields

3

4

Press SOUND.

10 keys are activated for sound adjustments.

Press TEST to check if you can hear the sounds through all the speakers at the equal level.

“TEST TONE L” starts flashing on the display, and a test tone comes out of the speakers in the following order:

SOUND

TEST

1

3Adjust the speaker output levels.

1) Press ADJUST repeatedly until one

ADJUST

 

of the following indications (with the

 

 

 

 

 

 

 

 

 

 

 

 

current setting)* appears on the

 

 

 

display.

 

 

 

 

 

 

 

 

CENTER :To adjust the center speaker output level

 

 

(–10 to +10).

 

 

 

 

 

 

 

 

 

TEST TONE L

 

TEST TONE C

 

 

TEST TONE R

 

 

(Left front speaker)

 

(Center speaker)

 

 

(Right front speaker)

 

 

TEST TONE LS

 

 

 

TEST TONE RS

 

 

 

(Left rear speaker)

(Right rear speaker)

Notes:

•You can adjust the speaker output levels without outputting the test tone.

•No test tone comes out of the center speaker when “CNTR SP” is set to “NONE.”

•No test tone comes out of the rear speakers when “REAR SP” is set to “NONE.”

REAR L : To adjust the left rear speaker output level (–10 to +10).

 

REAR R : To adjust the right rear speaker output level

 

(–10 to +10).

 

 

 

 

* “0” is the initial setting. If you have already changed the

 

setting, another number (level) will be shown.

 

2)

Press CONTROL UP 5/

CONTROL

DOWN UP

DOWN ∞ to adjust the selected speaker output levels.

5Adjust the speaker output levels

(–10 to +10).

Adjust the center speakers and rear speakers levels by comparing with the sound from the front speakers.

•To adjust the center speaker level, press CENTER +/–.

•To adjust the left rear speaker level, press REAR•L +/–.

•To adjust the right rear speaker level, press REAR•R +/–.

CENTER

2 3

REAR L

5 6

REARR

8 9

3)Repeat steps 1) and 2) to adjust the other speaker levels.

When you select “PL II MUSIC,” you can go to the following adjustment.

4 Turn on Panorama control on or off.

Remote

1) Press ADJUST repeatedly until

NOT

 

“PANORAMA” (with the current

ADJUST

setting)* appears on the display.

 

6 Press TEST again to stop the test

TEST

tone.

1

 

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

1Set the analog or digital input mode for the

source you like to listen and start playing.

When playing back software encoded with Dolby Digital and DTS Digital Surround, select the digital input mode (see page 11).

2 Press SURROUND ON/OFF

SURROUND ON/OFF

 

repeatedly to activate Surround

 

mode.

 

Each time you press the button, Surround mode turns on and off alternately.

•If you are playing back software encoded with Dolby Digital multichannel, “DOLBY DIGITAL” is selected.

•If you are playing back software encoded with DTS Digital Surround, “DTS SURROUND” is selected.

• If you are playing back any software other

than above, you can select “PL II MUSIC” or “PL II MOVIE” according to the source

by pressing SURROUND MODE.

( PRO LOGIC II indicator lights up on the display.)

If you like to adjust sound, go to step 3.

*“OFF” is the initial setting. If you have

already changed the setting, “ON” will be shown.

2) Press CONTROL UP 5/DOWN ∞ CONTROL

DOWN UP

to select if you turn on or off Panorama control.

•Each time you press the button, “ON” and “OFF” change alternately.

ON : Select this when you like to enjoy “wraparound” sound effect with side-wall image.

OFF : Select this when you like to enjoy originally recorded sounds.

To cancel Surround mode

Press SURROUND ON/OFF again so that “SURROUND OFF” appears on the display.

•If Surround mode is canceled while playing back multichannel digital software, all channel signals are mixed and output through the front speakers (and subwoofer if you have connected a subwoofer and set the subwoofer setting correctly—“YES”).

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents RX-6020VBK / RX-6022VSL Mises en garde, précautions et indications diverses Table of Contents Remote Control Parts IdentificationFront Panel Before Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Identification / Getting StartedConnecting the FM and AM Antennas AM loop antenna connectionFM antenna connection Supplied FM Standard typeConnecting the Speakers Connecting the front, center and rear speakersSpeaker layout diagram Connecting the subwoofer speakerConnecting Audio/Video Components Analog connections Audio component connectionsVideo component connections VCRConnecting the Power Cord For enjoying DVD Multi Playback ModePlug the power cord into an AC outlet Digital connectionsTurning On the Power Basic OperationsSelecting the Source to Play Adjusting the Volume Basic OperationsTurning Off the Power With the Sleep TimerTurning Off the Sounds Temporarily-MutingBasic Settings Selecting the Analog or Digital Input ModeSetting the Speaker Information Remote On the front panel From the remote controlPress ANALOG/DIGITAL To register whether you have Connected a subwoofer or notBasic Settings Unit with the current setting Appears on the displayPress Control UP /DOWN Select the unitPress Setting repeatedly until LFE DisplaySelect the low frequency effect attenuator level Sound Adjustments Adjusting the Subwoofer Output LevelTuning in Stations Using Preset TuningTuner Operations Selecting the FM Reception Mode Tuner OperationsCreating Realistic Sound Fields Dolby SurroundDTS Digital Surround Typical Multichannel 5.1 ch reproductionDVD Multi Playback Mode DAP Digital Acoustic Processor modesCreating sound field All Channel StereoAbout Relations between Speaker Layout and Surround Modes Turning on or off Surround modesSelecting Surround modes Activate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Rearl + Rearr +Adjust the speaker output levels 10 to +10 Repeatedly to activate Surround ModePress Control UP Panorama with the currentUsing DAP Modes and All Channel Stereo Using DVD Multi Playback Mode Activating DVD Multi Playback ModeAdjust the speaker output levels Press DVD MultiCompu Link Remote Control System Using DVD Multi PlaybackPress the play 3 button on the CD player AV Compu Link Remote Control System ConnectionsAutomatic Selection of TV’s Input Mode Automatic Power On/OffAV Compu Link Remote One-Touch Video PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsVideo Components Operating Video ComponentsCassette deck DVD playerTroubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionDo not service the television yourself Toll Free 1 800Limited Warranty 0302NHMMDWJEIN

RX-6022VSL specifications

The JVC RX-6022VSL is a versatile audio receiver that caters to the demands of both audiophiles and casual listeners. Renowned for its blend of performance, functionality, and aesthetic appeal, the RX-6022VSL has become a favored choice for home theater setups and music enthusiasts alike.

One of the standout features of the RX-6022VSL is its comprehensive support for various audio formats. It offers multiple audio inputs including digital coaxial and optical connections, allowing users to connect a range of devices, from CD players to gaming consoles. This flexibility ensures that all audio sources can be integrated seamlessly into one system.

The RX-6022VSL is equipped with a robust 5.1-channel surround sound capability, supporting Dolby Digital and DTS decoding. This immersive audio experience allows users to enjoy their favorite movies and music with rich, dynamic sound, making it an essential addition to any home theater. The receiver delivers high-powered output with a total power of 100 watts per channel, ensuring that even large rooms can be filled with crisp and powerful audio.

In addition to traditional audio capabilities, the RX-6022VSL features advanced technologies that enhance the listening experience. The inclusion of a built-in AM/FM tuner allows users to access their favorite radio stations easily. Furthermore, the receiver supports various sound enhancement features, such as tone control and balance adjustment, enabling users to customize their audio experience to suit personal preferences.

The user-friendly interface of the RX-6022VSL is designed for ease of use. A dual-front display provides quick access to controls, while an intuitive remote control allows for convenient operation from a distance. Additionally, the receiver is equipped with an easy-to-use setup wizard that guides users through the initial configuration process, ensuring a hassle-free installation.

Design-wise, the JVC RX-6022VSL boasts a sleek and modern aesthetic, making it a stylish addition to any entertainment center. With an elegant black finish and well-organized front panel, it not only performs well but also complements the decor of any living space.

Overall, the JVC RX-6022VSL is a powerful and adaptable audio receiver that combines essential features with advanced technology. Its ability to provide high-quality sound, multiple connectivity options, and user-friendly design makes it a valuable choice for anyone looking to elevate their audio experience at home.
Top Page Image Contents