JVC RX-6022VSL manual Operating JVC’s Audio/Video Components, Operating Audio Components

Page 30

Operating JVC’s Audio/Video Components

You can use the remote control to operate other JVC’s components.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see page 25) in addition to the connections using cables with RCA pin plugs (see page 6).

•Aim the remote control directly at the remote sensor on the receiver.

•If you use the buttons on the front panel, the remote control will not operate that source. To operate a source with the remote control, the source must be selected with source selecting buttons on the remote control.

•To operate the cassette deck or CD recorder by COMPU LINK remote control system, set the source name correctly. (See page 8.)

•Refer also to the manuals supplied with your audio components.

Sound Adjustment

You can always use following buttons for sound adjustment:

SURROUND ON/OFF : Turn on or off Surround modes.

SURROUND MODE : Select Surround modes.

After pressing SOUND, you can use following buttons for sound adjustment:

SUBWOOFER +/–

: Adjust the subwoofer output level.

CENTER +/–

: Adjust the center speaker output level.

 

 

REAR•L +/–

: Adjust the left rear speaker output level.

REAR•R +/–

: Adjust the right rear speaker output level.

EFFECT

: Select the DAP effect level.

TEST

: Turn on or off the test tone output.

 

 

Note:

After adjusting sounds, press the corresponding source selecting button or CD-DISC to operate your target source with 10 keys on the remote control, otherwise 10 keys cannot be used for operating your target source.

Tuner

You can always use following buttons:

FM/AM

: Alternate between FM and AM.

FM MODE

: Change the FM reception mode.

 

 

After pressing FM/AM, you can use following buttons for Tuner operations:

1 – 10, +10: Select a preset channel number directly.

• For channel number 5, press 5.

• For channel number 15, press +10, then 5.

• For channel number 20, press +10, then 10.

CD player

After pressing CD, you can use following buttons for CD operations:

3

: Start playback.

 

4

: Return to the beginning of the current

 

 

(or previous) track.

 

 

 

 

¢

: Skip to the beginning of the next track.

 

7

: Stop playback.

 

 

 

 

8

: Pause playback. To release it, press 3.

 

1 – 10, +10

: Select a track number directly.

 

 

• For track number 5, press 5.

 

 

• For track number 15, press +10, then 5.

 

 

• For track number 20, press +10, then 10.

 

 

 

 

CD changer

After pressing CD-DISC, you can use following buttons for CD changer operations:

3

: Start playback.

 

4

: Return to the beginning of the current

 

 

(or previous) track.

 

 

 

 

¢

: Skip to the beginning of the next track.

 

7

: Stop playback.

 

 

 

 

8

: Pause playback. To release it, press 3.

 

1 – 6, 7/P

: Select the number of a disc installed in a CD

 

 

changer.

 

 

 

 

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301),

you can do following operations with number buttons after pressing CD:

1Select a disc number.

2Then select a track number (always enter two digits).

3Start playback.

Examples:

•Selecting disc number 3, track number 2, and start playback. Press 3, then, 0, 2, then 3.

•Selecting disc number 10, track number 5, and start playback. Press 1, 0, then, 0, 5, then 3.

•Selecting disc number 105, track number 12, and start playback. Press 1, 0, 5, then 1, 2, then 3.

CD recorder

Before starting operations described below, make sure that you have changed the source name correctly. See page 8.

After pressing TAPE/CDR, you can use following buttons for CD recorder operations:

3

: Start playback.

 

4

: Return to the beginning of the current

 

 

(or previous) track.

 

 

 

 

¢

: Skip to the beginning of the next track.

 

7

: Stop playback or recording.

 

 

 

 

8

: Pause playback. To release it, press 3.

 

REC PAUSE

: Press this button to enter recording pause.

 

Press this button and then 3 to start recording.

28

Page 29 Page 31
Image 30
Page 29 Page 31
Contents RX-6020VBK / RX-6022VSL Mises en garde, précautions et indications diverses Table of Contents Remote Control Parts IdentificationFront Panel Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Identification / Getting StartedFM antenna connection Connecting the FM and AM AntennasAM loop antenna connection Supplied FM Standard typeSpeaker layout diagram Connecting the SpeakersConnecting the front, center and rear speakers Connecting the subwoofer speakerVideo component connections Connecting Audio/Video ComponentsAnalog connections Audio component connections VCRPlug the power cord into an AC outlet Connecting the Power CordFor enjoying DVD Multi Playback Mode Digital connectionsTurning On the Power Basic OperationsSelecting the Source to Play Adjusting the Volume Basic OperationsTurning Off the Sounds Turning Off the PowerWith the Sleep Timer Temporarily-MutingBasic Settings Selecting the Analog or Digital Input ModePress ANALOG/DIGITAL Setting the Speaker Information RemoteOn the front panel From the remote control To register whether you have Connected a subwoofer or notPress Control UP /DOWN Basic SettingsUnit with the current setting Appears on the display Select the unitPress Setting repeatedly until LFE DisplaySelect the low frequency effect attenuator level Sound Adjustments Adjusting the Subwoofer Output LevelTuning in Stations Using Preset TuningTuner Operations Selecting the FM Reception Mode Tuner OperationsDTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionCreating sound field DVD Multi Playback ModeDAP Digital Acoustic Processor modes All Channel StereoAbout Relations between Speaker Layout and Surround Modes Turning on or off Surround modesSelecting Surround modes Press Surround ON/OFF to Activate Surround modeIf you like to adjust sound, go to step Rearl + Rearr +Press Control UP Adjust the speaker output levels 10 to +10Repeatedly to activate Surround Mode Panorama with the currentUsing DAP Modes and All Channel Stereo Adjust the speaker output levels Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Press DVD MultiCompu Link Remote Control System Using DVD Multi PlaybackPress the play 3 button on the CD player AV Compu Link Remote Control System ConnectionsAV Compu Link Remote Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsCassette deck Video ComponentsOperating Video Components DVD playerTroubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionDo not service the television yourself Toll Free 1 800Limited Warranty 0302NHMMDWJEIN

RX-6022VSL specifications

The JVC RX-6022VSL is a versatile audio receiver that caters to the demands of both audiophiles and casual listeners. Renowned for its blend of performance, functionality, and aesthetic appeal, the RX-6022VSL has become a favored choice for home theater setups and music enthusiasts alike.

One of the standout features of the RX-6022VSL is its comprehensive support for various audio formats. It offers multiple audio inputs including digital coaxial and optical connections, allowing users to connect a range of devices, from CD players to gaming consoles. This flexibility ensures that all audio sources can be integrated seamlessly into one system.

The RX-6022VSL is equipped with a robust 5.1-channel surround sound capability, supporting Dolby Digital and DTS decoding. This immersive audio experience allows users to enjoy their favorite movies and music with rich, dynamic sound, making it an essential addition to any home theater. The receiver delivers high-powered output with a total power of 100 watts per channel, ensuring that even large rooms can be filled with crisp and powerful audio.

In addition to traditional audio capabilities, the RX-6022VSL features advanced technologies that enhance the listening experience. The inclusion of a built-in AM/FM tuner allows users to access their favorite radio stations easily. Furthermore, the receiver supports various sound enhancement features, such as tone control and balance adjustment, enabling users to customize their audio experience to suit personal preferences.

The user-friendly interface of the RX-6022VSL is designed for ease of use. A dual-front display provides quick access to controls, while an intuitive remote control allows for convenient operation from a distance. Additionally, the receiver is equipped with an easy-to-use setup wizard that guides users through the initial configuration process, ensuring a hassle-free installation.

Design-wise, the JVC RX-6022VSL boasts a sleek and modern aesthetic, making it a stylish addition to any entertainment center. With an elegant black finish and well-organized front panel, it not only performs well but also complements the decor of any living space.

Overall, the JVC RX-6022VSL is a powerful and adaptable audio receiver that combines essential features with advanced technology. Its ability to provide high-quality sound, multiple connectivity options, and user-friendly design makes it a valuable choice for anyone looking to elevate their audio experience at home.
Top Page Image Contents