JVC RX-6022VSL manual Identification / Getting Started, Checking the Supplied Accessories

Page 5

Getting Started

Before Installation

Putting Batteries in the Remote Control

Parts

General Precautions

•DO NOT insert any metal object to the unit.

•DO NOT disassemble the unit or remove screws, covers, or cabinet.

•DO NOT expose the unit to rain or moisture.

Locations

•Install the unit in a location that is level and protected from moisture.

•The temperature around the unit must be between –5˚C and 35˚C (23˚F and 95˚F).

•Make sure there is good ventilation around the unit. Poor ventilation could cause overheating and damage the unit.

Handling the unit

•DO NOT touch the power cord with wet hands.

•DO NOT pull the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

•Keep the power cord away from the connecting cords and the antenna. The power cord may cause noise or screen interference. It is recommended to use a coaxial cable for antenna connection, since it is well-shielded against interference.

•When a power failure occurs, or when you unplug the power cord, the preset settings such as preset FM/AM channels and sound adjustments may be erased in a few days.

Checking the Supplied Accessories

Check to be sure you have all of the following supplied accessories. The number in the parentheses indicates the quantity of the piece(s) supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

If anything is missing, contact your dealer immediately.

Before using the remote control, put two supplied batteries first.

•When using the remote control, aim the remote control directly at the remote sensor on the unit.

1On the back of the remote control, remove the battery cover.

2Insert batteries.

• Make sure to match the polarity: (+) to (+) and (–) to (–).

3Replace the cover.

If the range or effectiveness of the remote control decreases, replace the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.

CAUTION:

Follow these precautions to avoid leaking or cracking cells:

•Place batteries in the remote control so they match the polarity:

(+) to (+) and (–) to (–).

•Use the correct type of batteries. Batteries that look similar may differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

Identification / Getting Started

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents RX-6020VBK / RX-6022VSL Mises en garde, précautions et indications diverses Table of Contents Front Panel Remote ControlParts Identification Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Identification / Getting StartedAM loop antenna connection Connecting the FM and AM AntennasFM antenna connection Supplied FM Standard typeConnecting the front, center and rear speakers Connecting the SpeakersSpeaker layout diagram Connecting the subwoofer speakerAnalog connections Audio component connections Connecting Audio/Video ComponentsVideo component connections VCRFor enjoying DVD Multi Playback Mode Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsSelecting the Source to Play Turning On the PowerBasic Operations Basic Operations Adjusting the VolumeWith the Sleep Timer Turning Off the PowerTurning Off the Sounds Temporarily-MutingSelecting the Analog or Digital Input Mode Basic SettingsOn the front panel From the remote control Setting the Speaker Information RemotePress ANALOG/DIGITAL To register whether you have Connected a subwoofer or notUnit with the current setting Appears on the display Basic SettingsPress Control UP /DOWN Select the unitSelect the low frequency effect attenuator level Press Setting repeatedly until LFEDisplay Adjusting the Subwoofer Output Level Sound AdjustmentsTuner Operations Tuning in StationsUsing Preset Tuning Tuner Operations Selecting the FM Reception ModeDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionDAP Digital Acoustic Processor modes DVD Multi Playback ModeCreating sound field All Channel StereoSelecting Surround modes About Relations between Speaker Layout and Surround ModesTurning on or off Surround modes If you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Rearl + Rearr +Repeatedly to activate Surround Mode Adjust the speaker output levels 10 to +10Press Control UP Panorama with the currentUsing DAP Modes and All Channel Stereo Activating DVD Multi Playback Mode Using DVD Multi Playback ModeAdjust the speaker output levels Press DVD MultiPress the play 3 button on the CD player Compu Link Remote Control SystemUsing DVD Multi Playback Connections AV Compu Link Remote Control SystemAutomatic Power On/Off Automatic Selection of TV’s Input ModeAV Compu Link Remote One-Touch Video PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsOperating Video Components Video ComponentsCassette deck DVD playerProblem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionToll Free 1 800 Do not service the television yourselfLimited Warranty 0302NHMMDWJEIN

RX-6022VSL specifications

The JVC RX-6022VSL is a versatile audio receiver that caters to the demands of both audiophiles and casual listeners. Renowned for its blend of performance, functionality, and aesthetic appeal, the RX-6022VSL has become a favored choice for home theater setups and music enthusiasts alike.

One of the standout features of the RX-6022VSL is its comprehensive support for various audio formats. It offers multiple audio inputs including digital coaxial and optical connections, allowing users to connect a range of devices, from CD players to gaming consoles. This flexibility ensures that all audio sources can be integrated seamlessly into one system.

The RX-6022VSL is equipped with a robust 5.1-channel surround sound capability, supporting Dolby Digital and DTS decoding. This immersive audio experience allows users to enjoy their favorite movies and music with rich, dynamic sound, making it an essential addition to any home theater. The receiver delivers high-powered output with a total power of 100 watts per channel, ensuring that even large rooms can be filled with crisp and powerful audio.

In addition to traditional audio capabilities, the RX-6022VSL features advanced technologies that enhance the listening experience. The inclusion of a built-in AM/FM tuner allows users to access their favorite radio stations easily. Furthermore, the receiver supports various sound enhancement features, such as tone control and balance adjustment, enabling users to customize their audio experience to suit personal preferences.

The user-friendly interface of the RX-6022VSL is designed for ease of use. A dual-front display provides quick access to controls, while an intuitive remote control allows for convenient operation from a distance. Additionally, the receiver is equipped with an easy-to-use setup wizard that guides users through the initial configuration process, ensuring a hassle-free installation.

Design-wise, the JVC RX-6022VSL boasts a sleek and modern aesthetic, making it a stylish addition to any entertainment center. With an elegant black finish and well-organized front panel, it not only performs well but also complements the decor of any living space.

Overall, the JVC RX-6022VSL is a powerful and adaptable audio receiver that combines essential features with advanced technology. Its ability to provide high-quality sound, multiple connectivity options, and user-friendly design makes it a valuable choice for anyone looking to elevate their audio experience at home.
Top Page Image Contents