JVC RX-6022VSL manual AV Compu Link Remote Control System, Connections

Page 28

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC’s audio components through the remote sensor on the receiver. To use this remote control system, you need to connect the video components you want to operate by following the diagram and the procedure below.

•Make sure that AC power cords of these components are unplugged before connecting. Plug AC power cords only after all connections are completed.

CONNECTIONS:

VCR

VHS

AV

COMPU LINK

DVD player

DVD

AV

COMPU LINK

AV

COMPU LINK

Note:

TV

AV COMPU LINK EX

AV

COMPU LINK III

You can only connect to the TV with the AV COMPU LINK EX or AV

COMPU LINK III terminal.

The TV with AV COMPU LINK RECEIVER/AMP terminal will not be used.

Notes:

•When connecting only the VCR and DVD player to this receiver, use the cable with monaural mini-plugs.

•You can connect only the TV with AV COMPU LINK to the AV COMPU LINK terminal.

•Refer also to the manuals supplied with your video components.

•Make sure that the remote control code of the VCR connected to the VCR jacks is set to code “A.”

1Unplug your VCR, DVD player, TV, and this receiver from the AC outlets.

2Connect your VCR, DVD player, TV, and this receiver using cables with the monaural mini- plugs (not supplied).

•See “CONNECTIONS” above.

3Connect VCR, DVD player, TV, and this receiver using cables with RCA pin plug.

•See pages 6 and 7.

4Plug AC power cords of the components back into the AC outlets.

5When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to the minimum with the volume control on the TV.

6Turn on the other connected components first, then turn on this receiver.

•When turning on the VCR, use the remote control supplied

with this receiver (press STANDBY/ON VCR).

26

Page 27 Page 29
Image 28
Page 27 Page 29
Contents RX-6020VBK / RX-6022VSL Mises en garde, précautions et indications diverses Table of Contents Parts Identification Remote ControlFront Panel Before Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Identification / Getting StartedConnecting the FM and AM Antennas AM loop antenna connectionFM antenna connection Supplied FM Standard typeConnecting the Speakers Connecting the front, center and rear speakersSpeaker layout diagram Connecting the subwoofer speakerConnecting Audio/Video Components Analog connections Audio component connectionsVideo component connections VCRConnecting the Power Cord For enjoying DVD Multi Playback ModePlug the power cord into an AC outlet Digital connectionsBasic Operations Turning On the PowerSelecting the Source to Play Adjusting the Volume Basic OperationsTurning Off the Power With the Sleep TimerTurning Off the Sounds Temporarily-MutingBasic Settings Selecting the Analog or Digital Input ModeSetting the Speaker Information Remote On the front panel From the remote controlPress ANALOG/DIGITAL To register whether you have Connected a subwoofer or notBasic Settings Unit with the current setting Appears on the displayPress Control UP /DOWN Select the unitDisplay Press Setting repeatedly until LFESelect the low frequency effect attenuator level Sound Adjustments Adjusting the Subwoofer Output LevelUsing Preset Tuning Tuning in StationsTuner Operations Selecting the FM Reception Mode Tuner OperationsCreating Realistic Sound Fields Dolby SurroundDTS Digital Surround Typical Multichannel 5.1 ch reproductionDVD Multi Playback Mode DAP Digital Acoustic Processor modesCreating sound field All Channel StereoTurning on or off Surround modes About Relations between Speaker Layout and Surround ModesSelecting Surround modes Activate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Rearl + Rearr +Adjust the speaker output levels 10 to +10 Repeatedly to activate Surround ModePress Control UP Panorama with the currentUsing DAP Modes and All Channel Stereo Using DVD Multi Playback Mode Activating DVD Multi Playback ModeAdjust the speaker output levels Press DVD MultiUsing DVD Multi Playback Compu Link Remote Control SystemPress the play 3 button on the CD player AV Compu Link Remote Control System ConnectionsAutomatic Selection of TV’s Input Mode Automatic Power On/OffAV Compu Link Remote One-Touch Video PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsVideo Components Operating Video ComponentsCassette deck DVD playerTroubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionDo not service the television yourself Toll Free 1 800Limited Warranty 0302NHMMDWJEIN

RX-6022VSL specifications

The JVC RX-6022VSL is a versatile audio receiver that caters to the demands of both audiophiles and casual listeners. Renowned for its blend of performance, functionality, and aesthetic appeal, the RX-6022VSL has become a favored choice for home theater setups and music enthusiasts alike.

One of the standout features of the RX-6022VSL is its comprehensive support for various audio formats. It offers multiple audio inputs including digital coaxial and optical connections, allowing users to connect a range of devices, from CD players to gaming consoles. This flexibility ensures that all audio sources can be integrated seamlessly into one system.

The RX-6022VSL is equipped with a robust 5.1-channel surround sound capability, supporting Dolby Digital and DTS decoding. This immersive audio experience allows users to enjoy their favorite movies and music with rich, dynamic sound, making it an essential addition to any home theater. The receiver delivers high-powered output with a total power of 100 watts per channel, ensuring that even large rooms can be filled with crisp and powerful audio.

In addition to traditional audio capabilities, the RX-6022VSL features advanced technologies that enhance the listening experience. The inclusion of a built-in AM/FM tuner allows users to access their favorite radio stations easily. Furthermore, the receiver supports various sound enhancement features, such as tone control and balance adjustment, enabling users to customize their audio experience to suit personal preferences.

The user-friendly interface of the RX-6022VSL is designed for ease of use. A dual-front display provides quick access to controls, while an intuitive remote control allows for convenient operation from a distance. Additionally, the receiver is equipped with an easy-to-use setup wizard that guides users through the initial configuration process, ensuring a hassle-free installation.

Design-wise, the JVC RX-6022VSL boasts a sleek and modern aesthetic, making it a stylish addition to any entertainment center. With an elegant black finish and well-organized front panel, it not only performs well but also complements the decor of any living space.

Overall, the JVC RX-6022VSL is a powerful and adaptable audio receiver that combines essential features with advanced technology. Its ability to provide high-quality sound, multiple connectivity options, and user-friendly design makes it a valuable choice for anyone looking to elevate their audio experience at home.
Top Page Image Contents