JVC RX-6022VSL manual Specifications, Per channel, min. RMS, driven into 8 Ω, Harmonic distortion

Page 33

Specifications

 

 

Designs & specifications are subject to change without notice.

 

 

 

 

 

 

 

Amplifier

Output Power At Stereo operation:

Front channels:

100 W per channel, min. RMS, driven into 8 Ω,

 

40 Hz to 20 kHz with no more than 0.8% total

 

harmonic distortion.

At Surround operation:

 

Front channels:

100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no

 

more than 0.8% total harmonic distortion.

Center channel:

100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than

 

0.8% total harmonic distortion.

Rear channels:

100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no

 

more than 0.8% total harmonic distortion.

Audio

 

 

Audio Input Sensitivity/Impedance (1 kHz):

DVD, VCR, TV SOUND, CD, TAPE/CDR:

220 mV/47 k Ω

Audio Input (DIGITAL IN)* :

Coaxial: DIGITAL 1 (DVD):

0.5 V (p-p)/75 Ω

 

Optical: DIGITAL 2 (CD):

–21 dBm to –15 dBm (660 nm ±30 nm)

 

* Corresponds to Linear PCM, Dolby Digital, and DTS Digital Surround

 

(with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:

TAPE/CDR, VCR:

220 mV

Signal-to-Noise Ratio (’66 IHF/’78 IHF):

DVD, VCR, TV SOUND, CD, TAPE/CDR:

87 dB/78 dB

Frequency Response (8 Ω):

DVD, VCR, TV SOUND, CD, TAPE/CDR:

20 Hz to 20 kHz (±1 dB)

Tone Control:

Bass (100 Hz):

±10 dB

 

Treble (10 kHz):

±10 dB

Video

 

 

Video Input Sensitivity/Impedance:

 

 

Composite video:

VCR, DVD:

1 V (p-p)/75 Ω

Video Output Level/Impedance:

 

 

Composite video:

VCR, MONITOR OUT:

1 V (p-p)/75 Ω

Synchronization:

Negative

 

Signal-to-Noise Ratio:

45 dB

 

FM tuner (IHF)

Tuning Range:

87.5 MHz to 108.0 MHz

 

Usable Sensitivity:

Monaural:

12.8 dBf (1.2 µV/75 Ω)

50 dB Quieting Sensitivity:

Monaural:

21.3 dBf (3.2 µV/75 Ω)

 

Stereo:

41.3 dBf (31.5 µV/75 Ω)

Signal-to-Noise Ratio (IHF-A weighted):

Monaural:

78 dB at 85 dBf

 

Stereo:

73 dB at 85 dBf

Total Harmonic Distortion:

Monaural:

0.4% at 1 kHz

 

Stereo:

0.6% at 1 kHz

Stereo Separation at REC OUT:

35 dB at 1 kHz

 

Alternate Channel Selectivity:

45 dB: (±400 kHz)

 

Frequency Response:

30 Hz to 15 kHz: (+0.5 dB, –3 dB)

 

AM tuner

Tuning Range:

530 kHz to 1 710 kHz

 

Usable Sensitivity:

Loop antenna

400 µV/m

Signal-to-Noise Ratio:

50 dB (100 mV/m)

 

General

Power Requirements:

AC 120V , 60 Hz

Power Consumption:

180 W/230 VA (at operation)

 

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 146.5 mm x 416 mm (17 3/16 in. x 5 13/16 in. x 16 7/16 in.)

Mass:

8.8 kg (19.5 lbs)

Trouble Shooting / Specifications

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents RX-6020VBK / RX-6022VSL Mises en garde, précautions et indications diverses Table of Contents Remote Control Parts IdentificationFront Panel Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Identification / Getting StartedAM loop antenna connection Connecting the FM and AM AntennasFM antenna connection Supplied FM Standard typeConnecting the front, center and rear speakers Connecting the SpeakersSpeaker layout diagram Connecting the subwoofer speakerAnalog connections Audio component connections Connecting Audio/Video ComponentsVideo component connections VCRFor enjoying DVD Multi Playback Mode Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsTurning On the Power Basic OperationsSelecting the Source to Play Basic Operations Adjusting the VolumeWith the Sleep Timer Turning Off the PowerTurning Off the Sounds Temporarily-MutingSelecting the Analog or Digital Input Mode Basic SettingsOn the front panel From the remote control Setting the Speaker Information RemotePress ANALOG/DIGITAL To register whether you have Connected a subwoofer or notUnit with the current setting Appears on the display Basic SettingsPress Control UP /DOWN Select the unitPress Setting repeatedly until LFE DisplaySelect the low frequency effect attenuator level Adjusting the Subwoofer Output Level Sound AdjustmentsTuning in Stations Using Preset TuningTuner Operations Tuner Operations Selecting the FM Reception ModeDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionDAP Digital Acoustic Processor modes DVD Multi Playback ModeCreating sound field All Channel StereoAbout Relations between Speaker Layout and Surround Modes Turning on or off Surround modesSelecting Surround modes If you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Rearl + Rearr +Repeatedly to activate Surround Mode Adjust the speaker output levels 10 to +10Press Control UP Panorama with the currentUsing DAP Modes and All Channel Stereo Activating DVD Multi Playback Mode Using DVD Multi Playback ModeAdjust the speaker output levels Press DVD MultiCompu Link Remote Control System Using DVD Multi PlaybackPress the play 3 button on the CD player Connections AV Compu Link Remote Control SystemAutomatic Power On/Off Automatic Selection of TV’s Input ModeAV Compu Link Remote One-Touch Video PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsOperating Video Components Video ComponentsCassette deck DVD playerProblem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionToll Free 1 800 Do not service the television yourselfLimited Warranty 0302NHMMDWJEIN

RX-6022VSL specifications

The JVC RX-6022VSL is a versatile audio receiver that caters to the demands of both audiophiles and casual listeners. Renowned for its blend of performance, functionality, and aesthetic appeal, the RX-6022VSL has become a favored choice for home theater setups and music enthusiasts alike.

One of the standout features of the RX-6022VSL is its comprehensive support for various audio formats. It offers multiple audio inputs including digital coaxial and optical connections, allowing users to connect a range of devices, from CD players to gaming consoles. This flexibility ensures that all audio sources can be integrated seamlessly into one system.

The RX-6022VSL is equipped with a robust 5.1-channel surround sound capability, supporting Dolby Digital and DTS decoding. This immersive audio experience allows users to enjoy their favorite movies and music with rich, dynamic sound, making it an essential addition to any home theater. The receiver delivers high-powered output with a total power of 100 watts per channel, ensuring that even large rooms can be filled with crisp and powerful audio.

In addition to traditional audio capabilities, the RX-6022VSL features advanced technologies that enhance the listening experience. The inclusion of a built-in AM/FM tuner allows users to access their favorite radio stations easily. Furthermore, the receiver supports various sound enhancement features, such as tone control and balance adjustment, enabling users to customize their audio experience to suit personal preferences.

The user-friendly interface of the RX-6022VSL is designed for ease of use. A dual-front display provides quick access to controls, while an intuitive remote control allows for convenient operation from a distance. Additionally, the receiver is equipped with an easy-to-use setup wizard that guides users through the initial configuration process, ensuring a hassle-free installation.

Design-wise, the JVC RX-6022VSL boasts a sleek and modern aesthetic, making it a stylish addition to any entertainment center. With an elegant black finish and well-organized front panel, it not only performs well but also complements the decor of any living space.

Overall, the JVC RX-6022VSL is a powerful and adaptable audio receiver that combines essential features with advanced technology. Its ability to provide high-quality sound, multiple connectivity options, and user-friendly design makes it a valuable choice for anyone looking to elevate their audio experience at home.
Top Page Image Contents