S3.23 Assembly and Maintenance Guide
4.Attach Handles and Accessories
A.Install a Handle on each Pulley Assembly using
one 5mm Socket head screw Wrench tighten with a hex key.
Note: To adjust the outside pulley location, lift the Handle and slide it to the desired location.
B.Attach the two Soft Handles or a Soft Ankle Strap to the end of the cable using a Spring Clip.
This completes the assembly of your S3.23 Strength- Training Fitness Equipment.
1 - 5mm Socket head screw on
Aeach Pulley Assembly
1 2 3
Pulley Assembly
Install the Soft Handle or
BSoft Ankle Strap.
Spring
Clip
Soft
Handle
4 5 6
Step 4. Attach Handles and Accessories
page 15