S3.23 Assembly and Maintenance Guide
3AssemblyInstructions
Assembly of the S3.23 takes professional installers about 1 hour to complete. If this is the first time you have assembled this type of equipment, plan on significantly more time.
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain assistance, and follow the assembly steps sequentially, the process will take time, but is fairly easy.
CAUTION: Obtain assistance! Do not attempt to assemble the S3.23 by yourself. Review the Installation Requirements on page 6 before proceeding with the following steps.
The S3.23 comes in two long boxes with four smaller boxes of weights.
Be careful to open boxes and assemble components in the sequence presented in this manual.
Note: With so many assembled parts, proper alignment and adjustment is critical. While tightening the fasteners, be sure to leave room for adjustments. Do not fully tighten fasteners until instructed to do so.
1 | 2 | 3 | 4 | 5 | 6 |
Assembly Instructions
page 6