S3.23 Assembly and Maintenance Guide
2. Assemble Weight Stack
Note: Perform the following steps on each Main Upright. Complete the assembly steps for one side before moving the other Main Upright.
A.Have your assistant lift the Top Cap Weight to remove cable tension.
B.Use a hex key to remove the two buttonhead screws and two washers that secure the Guide Rod Bracket.
C.Remove the Guide Rod Bracket and Bumpers.
Main Upright |
|
|
|
|
|
|
|
| C |
|
|
| Cable |
|
|
|
|
|
|
| Guide Rod |
| Bumpers |
|
|
| B Bracket |
|
|
Guide Rods |
|
|
|
|
|
Top Cap Weight |
|
| A |
|
|
|
|
|
|
| |
Selector Stem |
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
Step 2. Assemble Weight Stack
page 9