6. | Stack and Bounce top and middle pole sections |
| together. |
7. | Bounce pole sections together until top section no |
longer moves toward taped reference mark. | |
|
|
IMPORTANT! |
POLES MUST OVERLAP 4” TO 5” |
WOOD SCRAP |
• Chute de Planche |
• Madera Sobrante |
• Tavolozza di Legno |
• Madeira de Refugo |
• Holzbrett (Abfallstück) |
• Stukje Hout |
• Trækrot |
• Trebit |
• Använt Trästycke |
WARNING!
DO NOT PROCEED
TO STEP 8
UNTIL CONCRETE
HAS CURED!
IMPORTANT!
FAILURE TO FILL YOUR POLE COMPLETELY WITH CONCRETE AS DESCRIBED IN THESE INSTRUCTIONS WILL VOID ALL WARRANTIES WRITTEN AND IMPLIED.
WOOD SCRAP
• Chute de Planche
• Madera Sobrante
• Tavolozza di Legno
•Madeira de Refugo
•Holzbrett (Abfallstück)
•Stukje Hout
•Trækrot
•Trebit
•Använt Trästycke
PLAYING SURFACE
• Surface de jeu
• Superficie de juego
• Superficie di giuoco
• Área de Jogo
• Spielfläche
• Speeloppervlak
• Spilleflade
• Spillebane
• Spelplan
PLAYING SURFACE
8. | Fit upper pole sections to bottom section. |
9. | After pole sections are positioned use sledge |
hammer and a wood scrap to pound pole sections |
together.
10. IMPORTANT! Pound pole sections together until poles no longer move toward taped reference mark on bottom pole, overlapping
11. Fill pole with concrete approximately 1” (2.54cm) below bottom hole (as shown above).
P/N 205331C 10/01 | 20 |