Huffy P/N 21147703 manual FIG. a

Page 17

3. Assemble lanyard (26) to locking pin (27) as shown (FIG A). Attach covers (35) onto pole mount bracket (28) with carriage bolt (19) and nut (11) as shown.

IMPORTANT!:

Loop end of pin lanyard (26) over carriage bolt (19) as it passes through the pole mount bracket

(28)during this assembly.

11	35
FIG. A	28	35
FIG. A		35

26

19

26

27

27

19

4. Apply logo and height indicator labels (23) to adjustment rod (51) as shown. Attach handle parts (52, 53) to adjustment rod with screw (55), carriage bolts (54), and flange nuts (11) as shown.

IMPORTANT!:

Indicator labels should be applied as close to holes as possible to prevent labels from being damaged during height adjustment.

23

23

11

11

52

51

53

54

55

54

17

03/04

P/N 21147703

Image 17

Contents Portable Basketball System 21147703 03/04 Safety Instructions Front Back Qty Description Hardware Identifier Bolts & Screws Height Adjustment Before YOU Start Label Section a Assemble the PolesPole Sections Should have a AND/OR Section B Assemble the BaseDo not Over Tighten 03/04 21147703 03/04 Socket Wrenches and Sockets 9/16 3/4 Section C Assemble the Elevator & Backboard21147703 03/04 FIG. a Face of Backboard Toward Board Upper Elevator tube Lower Elevator tube Pole Tighten ALL Hardware From 8 After This Assembly is Completed 03/04 USE EYE Protection Section D Securing the System FIG.A Section E Install Front CoverInstall clips Section F NET InstallationInsert net into bottom of clip as shown Section G Apply Height and Moving Label Height AdjustmentSection H Height Adjustment