Huffy P/N 21147703 manual Section F NET Installation, Install clips

Page 25

SECTION F: NET INSTALLATION

1.Install clips.

WARNING!

USE OF THIS PRODUCT

WITHOUT PROPER

INSTALLATION OF SMART

CLIPS®, OR WHEN ALL SMART

CLIPS® ARE NOT PRESENT

COULD RESULT IN BODILY

HARM. BE SURE TO FOLLOW

DIRECTIONS CAREFULLY.

CLIP “ARM”

CLIP “BODY”

40

57

A

B

Insert one “arm” of clip into ram as shown. Twist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown.

Push in direction indicated by arrows.

Push second “arm” back and into ram as shown.

Twist “body” of clip slightly again to spread “arms” of clip. Clip “arms” must be flat and touching edge to edge as shown, not overlapping.

C

25

03/04

P/N 21147703

Image 25

Contents Portable Basketball System 21147703 03/04 Safety Instructions Front Back Qty Description Hardware Identifier Bolts & Screws Height Adjustment Before YOU Start Label Section a Assemble the PolesPole Sections Should have a AND/OR Section B Assemble the BaseDo not Over Tighten 03/04 21147703 03/04 Socket Wrenches and Sockets 9/16 3/4 Section C Assemble the Elevator & Backboard21147703 03/04 FIG. a Face of Backboard Toward Board Upper Elevator tube Lower Elevator tube Pole Tighten ALL Hardware From 8 After This Assembly is Completed 03/04 USE EYE Protection Section D Securing the System FIG.A Section E Install Front CoverInstall clips Section F NET InstallationInsert net into bottom of clip as shown Section G Apply Height and Moving Label Height AdjustmentSection H Height Adjustment