11.Attach the Curl Pad (27) to the Curl Post (26) with two M6 x 16mm Screws (15).
12.Slide the Curl Post (26) into the Front Leg (8). Align one of the adjustment holes in the Curl Post with the adjustment hole in the Front Leg. Tighten the M10 x 48mm Adjustment Knob (33) into the adjustment hole in the Front Leg. Make sure that you fully tighten the Adjustment Knob.
13.Tap two 3/4” Round Inner Caps (9) into each Pad Tube (10). Insert the Pad Tubes into the holes in the Leg Lever (4) and the Front Leg (8). Slide two Foam Pads (22) onto each Pad Tube.
14.Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUST- MENTS, beginning on page 10.
11 |
|
|
|
| 27 |
|
|
|
| 15 |
|
|
|
| 26 |
12 |
|
|
|
| 26 |
|
|
|
| 33 |
|
|
| 8 |
|
13 |
|
|
|
22 |
|
|
|
4 |
| 8 | 10 |
| 9 | ||
|
|
| |
22 |
| 9 | 10 |
| 9 | 9 |
|
|
|
| |
|
| 10 | 22 |
|
|
|
9