Remote Controller RC-7650M
For Installers:
Read this installation guide carefully before carrying out installation.
Installation Guide NORITZ AMERICA CORPORATION
Note
Do not connect power to the water heater before the remote controller has been properly installed. Recommended installation location of the remote controller is in a bathroom.
Included Parts List
Part Name | Quantity |
|
|
Remote Controller | 1 |
Wall Packing | 1 |
Phillips Roundhead Wood Screw | 2 |
Wall Anchor | 2 |
|
|
Do not disassemble the remote controller.
Wall Packing | Connecting Wire |
Phillips Roundhead
Wood Screw
Wall Anchor
Remote Controller
Notes on the Installation Location
•The remote should be installed in an easily accessible location.
•Avoid installing in a place where water or steam can come into contact with the controller.
•Avoid locations where special chemical agents (e.g., benzene, fatty and oily deter- gents) are used.
•Avoid outdoor installation, or installation in an indoor location where it will be exposed to direct sunlight.
Connection of Remote Controller Cord
White Connector | To Remote controller |
*Confirm the connection with the labels at both ends of the remote controller cord.
•A 7.8m (26') cord can be purchased separately (Part #
•The remote controller cord can be ex- tended up to 90m (300') by splicing the cord and using 18 gauge wire to extend the cord to the appropriate length.
28