Pentax N-0751M-OD installation manual Before Installation, Danger

4. Before Installation

DANGER

Checkup [For indoor installation only]

• Check the fixing brackets and vent pipe yearly for damage or wear. Replace if necessary.

Check the Gas

WARNING

• Check that the rating plate indicates the
	N-0751M
correct type of gas.	Natural Gaz Naturel
	12,000 BTU
	199,900 BTU
• Check that the gas supply line is sized for	202		765
	0.65		2.55"
	4.0		10.5"
199,900 Btuh for this unit.
		0 - 2,000 Ft. (0 - 610 m) 2,000 - 4,500 Ft.* (610 - 1,370 m*)
		199,900		192,800
Check the Power
		168,000		162,800
• The power supply required is 120V AC, at 60Hz.		2.0		2.0
Using the incorrect voltage may result in fire or electric shock.

Use Extreme Caution if Using With a Solar Pre-Heater

•Using this unit with a solar pre-heater can lead to unpredictable output temperatures and possibly scalding. If absolutely necessary, use mixing valves to ensure output temperatures do not get to scalding levels. Do not use a solar pre-heater with the quick-connect multi-system.

CAUTION

Do Not Use Equipment for Purposes Other Than Those Specified

•Do not use for other than increasing the temperature of the water supply, as unexpected accidents may occur as a result.

Check Water Supply Quality

•If the water supply is hard, acidic or otherwise impure, treat the water with approved methods in order to ensure full warranty coverage.

4