Weider 831.153932 specification

44.Wrap the Swivel Low Cable (72) over a 90mm Pulley (78). Attach the Pulley to the Offset Double “U”-bracket (61) with an M10 x 45mm Bolt (93) and an M10 Nylon Locknut (87).

45.Wrap the Swivel Low Cable (72) under a 90mm Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (106) with an M10 x 45mm Bolt (93) and an M10 Nylon Locknut (87).

46.Route the Swivel Low Cable (72) under the indicat- ed stack of Weights (44).

Wrap the Swivel Low Cable (72) under a 90mm Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (106) with an M10 x 45mm Bolt (93) and an M10 Nylon Locknut (87).

47.Wrap the Swivel Low Cable (72) over a 90mm Pulley (78). Attach the Pulley and a Cable Trap (68) between the indicated holes in the Pulley Plates (63) with an M10 x 50mm Bolt (100) and an M10 Nylon Locknut (87). Make sure that the Cable

Trap is turned to hold the Cable in the groove of the Pulley.

48.Wrap the Swivel Low Cable (72) under a 90mm Pulley (78). Attach the Pulley to the indicated brack- et on the Short Base (2) with an M10 x 45mm Bolt (93) and an M10 Nylon Locknut (87).

44
93	87
61
	78
	72
45
72
	78
106	87
106
93
46
78	72
78
	87
44	106
93
47
100	63
100
68	87
	78
	72
48
78
	72
87	93
2

44
93	87
61
	78
	72
45
72
	78
106	87
106
93
46
78	72
78
	87
44	106
93
47
100	63
100
68	87
	78
	72
48
78
	72
87	93
2

44
93	87
61
	78
	72
45
72
	78
106	87
106
93
46
78	72
78
	87
44	106
93
47
100	63
100
68	87
	78
	72
48
78
	72
87	93
2

44
93	87
61
	78
	72
45
72
	78
106	87
106
93
46
78	72
78
	87
44	106
93
47
100	63
100
68	87
	78
	72
48
78
	72
87	93
2