Weider 831.153932 user manual Locknuts yet

Page 8

7.Press a 50mm x 75mm Inner Cap (58) into the top of the Squat Upright (4). Press two 25mm Round Outer Caps (120) onto the Upright.

Slide the Squat Upright onto the two indicated M10 x 65mm Carriage Bolts (110) in the Long Base (106). Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the

Locknuts yet.

Press a 50mm x 75mm Inner Cap (58) into the top of the Swivel Upright (5). Slide the Swivel Upright onto the two indicated M10 x 65mm Carriage Bolts

(110)in the Long Base (106). Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the Locknuts yet.

8.Press two Swivel Bushings (66) into the Swivel Carriage (46).

Tighten an Adjustment Handle (65) into the Swivel Carriage (46). Orient the Swivel Carriage as shown. Slide the Carriage onto the Swivel Upright (5) and engage the Adjustment Handle into an adjustment hole in the Swivel Upright.

7
58
58
5
4
87
	120
120
110	87
106	87
110
8
66
46
65
66
5
Adjustment
Hole

8

Image 8

Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions DecalOne on each side Before YOU BeginDecal Assembly Frame Assembly Locknut the Squat Knee Rest must be able to pivotDo not tighten the Locknuts yet Locknuts yet Assemble the other weight stack in the same way Butterfly Frame must be able to pivot easily Open the parts bag labeled ARM AssemblyTighten all of the M10 Nylon Locknuts 87 used in steps Cable Assembly 119 100 118 100 102 121 Trap is turned to hold the Cable in the groove of the Pulley Page Cable is in the groove of the Pulley Trap is turned to hold the Cable in the groove of the Pulley Trap is turned to hold the Cable in the groove of the Pulley Seat Assembly Locate and open the parts bag labeled Seat AssemblyTighten all of the M10 Nylon Locknuts 87 used in this step Repeat this step with the other end of the Squat ArmNylon Locknuts yet Page Adjustments Changing the Weight SettingConverting the Butterfly Arms Ing any exerciseAttaching the Curl PAD Adjusting the Squat ARM or Swivel CarriageAdjusting the Squat Knee Rest Lbs Top Weight Resistance ChartStation Troubleshooting Tightening the CablesButterfly Cable Swivel High Cable Squat Cable Cable DiagramsLat Cable Swivel Low Leg LeverSwivel Cable Part Identification CHART-Model No R0404APage Page Part LIST-Model No Key Qty DescriptionExploded DRAWING-Model No Full 90 DAY Warranty Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL